What are the procedures and how much does it cost to start a welding training school?

Go to the location of your account first.

Or you want to run a school in the local education bureau consultation, according to the requirements of the preparation and application, school premises, teachers (teacher certificate, professional training certificate, etc.), after the examination is qualified, the education bureau will issue the certificate, in the industry and commerce, tax handling other relevant documents. That's pretty much the case, it's pretty much the same everywhere. Specifically, it looks like this:

1. Directly registered in the industrial and commercial department, so it is a training company, the procedures are simple but the cost is high in the future, it is not easy to enjoy the preferential policies of the state, and it is not recommended;

2. Establish vocational training schools through the labor department. The specific procedures are: to the labor department to apply for the form, according to the requirements to issue the relevant certificate and **, after passing to the civil affairs department to approve the name, to the industry and commerce, tax department registration, your procedures there should be similar to this, so that it is a formal vocational training school, there are certain preferential policies.

It is recommended to go through this procedure;

There are two main categories of welder training:1Operation Certificate, 2

The professional qualification grade certificate and the operation certificate are compulsory, and the certificate must be examined to take the post, and it is not allowed to work without the certificate. Generally, the training is to test the vocational qualification registration certificate, and the vocational qualification level training is to improve the skills of welders, divided into: primary, intermediate, senior, technician, senior technician, the higher the grade, the higher the salary.

The tuition fee varies from place to place, but it generally ranges from 2,000 to 10,000 in Shenyang, and the duration of study varies from one week to one month depending on the content of study.

It is recommended that you go to the local safety supervision bureau to register, or find a designated training institution to learn, don't be fooled by unqualified.

Is there a job assignment to learn from a training institution? Generally, institutions have cooperative units, which can be recommended to relevant units to work, welders are in short supply of technical industries, with a salary of about 5000-10000, and even higher.

You need a license and technical qualification certificate, as well as a plaque, and if you are large, you will need tens of thousands of yuan.

As a technical profession, welders need to have certain professional knowledge and skills to be competent in their jobs. The welder technical training school is a place that can provide this kind of professional knowledge and technical beam foundation precursor, so how much does it cost to spend a school like Oak Clearing? Let's answer this question step by step.

1. Training fees.

First of all, it is necessary to consider the cost of technical training for welders. The fees here include tuition, textbooks, laboratory fees, etc. Depending on the domestic welder technical training school, the fee standard will also vary, but generally speaking, the tuition fee is between 5,000 yuan and 10,000 yuan.

The more popular welder technical students have more technical training in Fengdan schools, such as Lanxiang, Gaoxing and other schools, and the fee standard is about 12,000 yuan. Like some small and medium-sized training schools, it is relatively cheap, generally around 4,000 yuan.

2. Accommodation Fees.

For those who require accommodation, the cost of accommodation will need to be taken into account. The cost of accommodation also varies depending on the region and school, but is generally between 1,500 and 3,000 yuan. For those who choose to rent an apartment outside the school, the rent will be higher.

3. Transportation costs.

Transportation costs are also an expense to consider. For students who are far away from school, the cost of transportation is bound to increase. However, this fee is also relatively small, generally around a few hundred yuan per month.

IV. Examination Fees.

Some training schools also offer exams at the end of the course, and you need to pay an additional exam fee. Generally speaking, the cost of the exam is not too high, and the cost of each exam is between 100 yuan and 500 yuan.

Conclusion. According to the above introduction, it can be seen that the cost of welder technical training school is relatively reasonable, and it is even lower than that of other vocational skill training schools. However, it should be reminded that choosing the right school is the most important thing, especially for schools that are helpful for later employment, and the cost is relatively high, but it is worth choosing.

According to the market in February 2020, the general training is 2 months, and the tuition fee is 4,000 to 10,000 yuan (according to the city, school conditions, teachers, teaching equipment, and different tuition fees will be different). Welding silver mess is a very professional profession. Welders have very high requirements for operation, such as before and after welding.

The equipment, tools and materials at the welding and cutting work site should be arranged neatly, not stacked indiscriminately, and the necessary passages should be maintained. 2.The welding work area should not be less than 4 square meters, and the ground should be basically dry.

The workplace should have good natural lighting or local lighting, and the illumination of the working surface should be guaranteed to be 50 100 lux. 3.Within l0 meters around the welding and cutting operation point, all kinds of flammable and explosive materials must be evacuated.

If it cannot be cleared or evacuated, reliable safety measures should be taken before the welding and cutting work can begin. For equipment and engineering structures with combustible materials such as thermal insulation and thermal insulation installed near the operation site, special attention should be paid to taking safety measures to isolate the spark in advance to prevent fire from being hidden in it and causing fire. Hope it works for you.

I would like to do a training course for high-pressure welders. What materials do you need?

Dear, there are two ways.

1. Directly registered in the industrial and commercial department, which is a training company, the procedures are simple but the cost of lighting up in the future is high, and it is not easy to enjoy the preferential policies of the state, so it is not recommended; 2. Establish vocational training schools through the labor department. The specific procedures are: to the labor department to apply for the form, according to the requirements to issue the relevant certificate and **, after passing to the civil affairs department to approve the name, to the industry and commerce, the tax department of Yu Xiao registration, your town key draft in the procedures should be similar to this, so that the formal vocational training school, there are certain preferential policies.

It is recommended to go through this procedure;

How much does it cost to come down?

Small-scale. Ok, question received. Information is being collected.

How big of a venue do you need?

Dear, it depends on your equipment and the decoration of the environment, etc., how much space depends on the size of your class and the number of students.

I mainly teach welders, electric welding high voltage number welder training, 20 30 people.

Dear, this is the venue requirements information compiled for you:1The equipment, tools and materials at the welding and cutting work site should be arranged neatly, not stacked indiscriminately, and the necessary passages should be maintained.

2.The welding area should not be less than 4 square meters, and the ground should be basically dry. The workplace should have good natural lighting or local lighting, and the illumination of the working surface should be guaranteed to be 50 100 lux.

3.Within l0 meters around the welding and cutting operation point, all kinds of flammable and explosive materials must be evacuated. If it cannot be cleared or evacuated, reliable safety measures should be taken before the welding and cutting work can begin.

Equipment and engineering structures with combustible materials such as thermal insulation and thermal insulation near the operation site should be specially paid attention to taking measures to isolate the spark in advance to prevent fire from being hidden in it and causing fires. Hope it works for you.

Welder training** is related to the school, the length of study, and the learning content, according to the market ** in February 2020, the general training is 2 monthsTuition fees range from $2,000 to $3,000。Welder is a very professional profession, welder has very high requirements for operation, such as before and after welding.

Most people will have questions about how much welder training is, how much does it cost, how much does it cost, whether it is expensive, etc., before choosing a training provider. Nowadays, due to the fierce competition in the industry, the training institutions on the market are scrambling to use various low-price, first-class and other marketing methods to recruit students, so there is no standard for the cost of domestic welder training tuition.

Generally speaking, learning electric welding should be based on the time of learning and the type of welding technology, such as general welding, argon arc welding training is relatively low, two welding, cellulose welding, etc.

It is also a good craft for welders to be proficient and the technology to reach its peak, because if you put aside these different industries, according to the market wage in February 2020, the salary of welders can range from 3,000 to tens of thousands. If it is an ordinary welder, the general salary is about 3000, but the salary of a skilled welder can reach about 8000, as long as the technology is skilled, there is no problem at all if you want to get a high salary.

Considerations for choosing a welding training school

1. Faculty.

To measure how a training institution is, we must first look at whether its teachers are strong, what qualifications the teachers he hires, and how many years of experience he has.

2. Industry experience.

Secondly, it depends on the experience of the training institution, whether it has just done this training, or has accumulated a certain amount of training experience, and whether it is mature in the construction of the project.

3. Curriculum.

Whether the curriculum of the institution is scientific and whether the teaching content is in line with the market.

4. There is not much practical training.

To learn technology, especially welder technology, you must operate more and practice more in order to master it solidly.

Welder certificate (general name: welder on-the-job operation certificate) This certificate is uniformly printed by the State Administration of Work Safety, and the national unified IC card style. The certificate issued by the training center designated by the Work Safety Supervision Bureau after passing the training and then passing the examination of the Work Safety Supervision Bureau.

This certificate is valid for 6 years, and it should be reviewed once every three years, and it is common throughout the country and can be queried online.

Prerequisites. 1) Be at least 18 years old and meet the age requirements stipulated in the relevant types of work;

2) Diseases and physiological defects that have passed the physical examination of the hospital and do not prevent them from engaging in the corresponding special operations;

3) Junior high school degree or above;

4) Other conditions that meet the needs of the corresponding special operations.

If you want to engage in electric welding, you must need a work permit, which requires passing the examination to be issued.

Theoretical knowledge learning content:

1. Common welding methods (fusion welding; Pressure welding and brazing).

2. Manual arc welding, gas welding and gas cutting, argon arc welding, CO2 gas shielded welding.

3. The type of welding rod selection and storage, the type and use of welding equipment, and the form of welding joints.

4. The formation principle of welds.

5. Selection of welding position (flat welding, vertical welding, horizontal welding, vertical welding) and welding process parameters (welding current, arc voltage, welding polarity, welding speed, etc.), weld layout and weldment structure, gas welding process and cutting process, gas welding and gas cutting of commonly used metal materials, argon arc welding principle, equipment use and welding technology.

6. Welding deformation and stress generation and prevention methods.

7. Causes and prevention measures of common welding defects.

8. Welding inspection.

9. Safety regulations for electric welding and gas welding.

10. Understand the welding characteristics and operation points of cast iron, copper, aluminum, titanium and other metals.

Skills Practical Learning Content:

The basic operation of manual arc welding (flat welding, vertical welding, horizontal welding) and the operation of vertical welding and its essentials (with J507 alkaline electrode).

Operational techniques for flat and vertical fillet welding.

Welding methods for commonly used metal materials.

Master the basic operation techniques of gas welding and gas cutting.

Correct use of the adjustment method of the flame and the range of application of the flame (carbonization flame, neutral flame, oxidation flame).

Master the arc initiation, wire feeding technology, specific operation points and parameter adjustment, and the application scope of argon arc welding.

Shaanxi Xitang Vocational Skills Training School (formerly known as Xi'an Beilin Science and Technology Training School).

Shaanxi Safety Production Qualification Examination Station, 24 years of safety training, training personnel up to hundreds of thousands of people. Including: electrical work, welding and thermal cutting work, refrigeration and air conditioning work, work at height.

Shaanxi Xitang Vocational Skills Training School (formerly known as Xi'an Beilin Science and Technology Training School) was founded in 1996 and is a vocational skills training school approved by the Shaanxi Provincial Department of Human Resources and Social Security.

Shaanxi Provincial Administration of Work Safety designated by the special operation personnel safety technical training and assessment unit. 3A private non-enterprise unit registered with Shaanxi Provincial Department of Civil Affairs, and OSTA computer information technology examination station certified by the Ministry of Labor.

Over the past 24 years since its establishment, we have adhered to the tenet of "integrity-based, quality-oriented", given full play to the flexible management characteristics of private schools, and taken innovation as the driving force for the development of the school. Committed to the construction and training of talents.

The average annual training and assessment of thousands of people, has been well received by the cooperative units.

First of all, there are thousands of ways to learn electric welding, some people learn welding technology as apprentices with their masters, and some learn welding technology in local vocational colleges. Of course, the tuition fee for learning welding technology varies in different learning places, and when an apprentice learns welding technology, he can earn a salary without charging tuition. Therefore, how much is the tuition fee for learning welding, which is ultimately related to what kind of study place the student chooses.