What are the accessories of the water ring vacuum pump and where is the water ring vacuum pump insta

Of course, the first choice to buy vacuum pumps is Busch, the products are purely imported, the process is rigorous, the quality is supreme, stable and reliable, sturdy and durable, it is a leader in the industry, and is widely praised and favored by users. Busch Dolphin vacuum pumps are tried-and-tested, robust liquid ring vacuum pumps. It can be combined with a direct-coupled flanged motor to form a single or two-stage pump, or assembled on a base.

Their proven operating principle makes them suitable for use in a wide range of industrial sectors. Even in demanding applications, such as saturated gases and vapors, can be easily removed by liquid ring vacuum pumps. If you feel that the above is not detailed enough, you can consult Busch Vacuum Equipment International (Shanghai)****.

Vacuum Vacuum Equipment International (Shanghai) **** and Vacuum Vacuum Technology (Shanghai) **** are Vacuum Solutions of Germany....

1. a vacuum buffer tank; 2. Gas-liquid separator (circulating water tank); 3. a condenser; 4. Soft-start electric control box; These are the ones that are commonly used. It can also add vacuum gauges, pressure transmitters, automatic water inlet valves, ......In general, these should be sufficient.

There are more attachments. Water is the cooling medium of the vacuum pump. With such a cooling system, the water needs to be sealed, and you can imagine what accessories are needed at the most basic level.

Tank equipment is a must.

Summary. Hello happy to answer for you, your question is: Where is the water ring vacuum pump installed The answer is:

Installation method of water ring vacuum pump: 1. Installation of pump: When installing the vacuum pump and compressor, the installation surface must be level, and the hole at the bottom corner must be installed firmly with bolts.

In order to prevent welding slag from entering the vacuum pump during installation, during installation, air should be suctioned.

Hello I am happy to answer for you, your question is: Where is the water ring vacuum pump installed on the ridge The answer is: The installation method of the water ring vacuum pump:

1. Installation of the pump: When the vacuum pump and compressor are installed, the installation surface must be horizontal and firmly installed with bolts through the hole at the bottom corner. In order to prevent welding slag from entering the vacuum pump during installation, during installation, air should be suctioned.

2. Installation of water separator: The gas-water separator can be directly installed on the exhaust port of the vacuum pump and fixed firmly with bolts. The gas-water separator has a pipeline connected to the pump, which supplies the water required for the pump to work, and the rest of the working water is supplied by the water supply pipe, and the amount of water supply is adjusted by the valve of Zheng Shang, the pipe quarrelmaker.

The vacuum pump, or compressor, should be fitted with a check valve on the inlet pipe to prevent the water in the vacuum pump or compressor from returning to the system under pressure from the exhaust pipe when it is stopped.

Can you notify?

Can't talk. My pump room is equipped with a 55 thousand watt water pump, and the empty pump should be installed in front of the pump or behind it.

Front. Is it necessary to install a water valve before the vacuum pump?

Yes. Then there is also how to install the pressure gauge in **.

The pressure gauge should be installed in a place where it can be easily observed and serviced.

Okay, thanks.

Can I send an installation drawing?

I can't send it.

Water ring vacuum pump is a common vacuum pump, and the following points need to be paid attention to when installing:1Installation site:

It should be selected in a dry, ventilated, non-corrosive gas, suitable temperature place, and should be at a certain height from the ground. 2.Installation:

Water ring vacuum pumps can be installed upright or horizontally, but the weight and height of the pump need to be considered when installing upright. 3.Connecting Pipes:

The inlet, outlet and cooling water pipes of the pump need to be connected and tightly connected to avoid air leakage. 4.Cooling water:

Water ring vacuum pumps need to be continuously added to cool down, so they need to be connected to the cooling water pipeline, and the cooling water should be kept clean to avoid the influence of impurities on the pump. 5.Fixation of the pump:

After the installation is completed, the bridge dismantling pump needs to be fixed on the ground or foundation to avoid damage or displacement due to vibration and other reasons during use. There are many things that need to be paid attention to when installing a water ring vacuum pump, but the most important thing is to choose a suitable installation site and operate it strictly in accordance with the installation instructions to ensure the safe operation of the pump. At the same time, the quality of the connecting pipes and cooling water is also very important, and the tightness and cleanliness must be ensured.

It is also crucial to secure the position of the pump to ensure that it will not be displaced or damaged during use.

Water ring vacuum pump.

The water ring vacuum pump is used as the working liquid to extract the vacuum, and it is inevitable to encounter corrosive gases in the industrial production process.

Grey cast iron. , ductile iron, impeller stainless steel, copper impeller, and overcurrent parts stainless steel, whole.

Made of stainless steel.

Target. Grey cast iron made of water ring vacuum pump:

Gray cast iron (gray

castiron) is the first stage.

Graphitization. The process is fully carried out and the resulting cast iron, all or most of the carbon is present in the form of flake graphite, fractured.

It has a grayish dark color, hence the name, and it includes general gray cast iron (abbreviated.

Gray iron. ), inoculated cast iron, rare earth gray cast iron, etc.

In order to make the pump run safely and have a long life, it is necessary to pay attention to daily maintenance, and the following aspects should be paid attention to in maintenance

Shaft seals. Maintenance: --

Water ring vacuum pump.

To regularly check the water pressure and volume of the seal, always keep a small amount of clean water flowing along the shaft, regularly adjust the packing gland, check the packing and change the packing regularly. The water pressure of the shaft seal and the amount of water in the shaft seal should meet the above requirements (shaft seal inspection). Equipped with.

Mechanical seals. When the pump is not used for a long time, the mechanical seal part should be filled with N46 oil to prevent the mechanical seal parts from rusting and the failure of the internal rubber parts.

Adjustment of the impeller:

In order to ensure the efficient operation of the pump, it is necessary to adjust the gap between the impeller and the front guard plate in time, stop the pump first when adjusting the impeller clearance, loosen the bolt of the compression bearing assembly, adjust the nut on the bolt, make the bearing assembly move forward, and rotate the shaft by hand at the same time according to the rotation direction of the pump until the impeller rubs against the front guard plate, relax the nut just tightened in front of it for half a turn, and then tighten the nut in front of the adjustment bolt to move the bearing assembly back, and the gap between the impeller and the front guard plate is between at this time. After adjustment, it is necessary to re-check whether the impeller rotates normally and whether the bearing assembly hold-down bolts are tightened before starting again, and then start the pump. Water ring vacuum pump.

Water ring vacuum pump (referred to as water ring pump) is a rough vacuum pump, which can obtain an ultimate vacuum of 2000 4000pa, and a series atmospheric ejector can reach 270 670pa. The water ring pump can also be used as a compressor, called the water ring compressor, which is a low-pressure compressor, and its pressure range is 1 2 105pa gauge pressure. Initially used as a self-priming water pump, the water ring pump was gradually used in many industrial sectors such as petroleum, chemical, machinery, mining, light industry, medicine and food.

In many processes of industrial production, such as vacuum filtration, vacuum water diversion, vacuum feeding, vacuum evaporation, vacuum concentration, vacuum regain and vacuum degassing, water ring pumps are widely used. Due to the rapid development of vacuum application technology, water ring pumps have always been valued in the acquisition of rough vacuum. Because the gas compression in the water ring pump is isothermal, it can pump out flammable and explosive gases, and can also pump out dusty and water-containing gases, so the application of water ring pumps is increasing.

As shown in the figure: the pump body is filled with an appropriate amount of water as the working liquid. When the impeller rotates in the clockwise direction in the diagram, the upper inner surface of the water ring is just in contact with the tip of the blade (in fact, the blade has a certain insertion in the water ring).

depth). At this time, a crescent-shaped space is formed between the impeller hub and the water ring, and this space is divided into a number of small cavities equal to the number of blades by the impeller. If the lower 0° of the impeller is taken as the starting point, then the volume of the small cavity of the impeller changes from small to large when 180° before rotation, and communicates with the suction port on the end face, the gas is inhaled at this time, and the small cavity is isolated from the suction port when the suction is finished; When the impeller continues to rotate, the small cavity changes from large to small, so that the gas is compressed; When the chamber is connected to the exhaust port, the gas is discharged from the pump.

To sum up, the water ring pump relies on the change of the pump chamber volume to achieve suction, compression and exhaust, so it belongs to the variable volume vacuum pump.