How to use a wireless router How to use a wireless router?

How to set up a wireless router.

Two computers are connected to the local area and surf the Internet together. First connect the network cable of the ADSL connection box to the first port of the wireless router, and then connect your other computers to the back interface (as long as it is not the first interface).So you have two computers, at least 3 network cables (all with crystal heads).

Once connected, you can set it up: first connect the router to the two computers, open the Internet Explorer, and select"tools"-"Internet Options"-"Connections", if"Dial-up and virtual private network setup"Please delete all of the existing settings. Select"LAN settings", please go to that page"Automatic detection of settings"Tick.

admin password: admin (this is the initial user and password).Click OK to log in to the router.

Click"Setup Wizard"Follow the wizard to complete the setup. Which computer do I want to host: Any computer can be used as a host, as long as you have logged in to the router on that computer.

The route defaults to being the host.

First you have to go inside the router. You can also use a wireless or Internet cable, just go in. The IP address of the access route, you can read the manual, which contains the default IP of the router, which is generally the address above in the address bar of IE.

The account and password are generally admin by default, and after entering, in the basic settings and WLAN settings. You can see that there are three ways to access the Internet, if you dial up the number to go online, you can first pppoe. Just fill in the account number and password you used to dial in the online account.

How to connect, just choose one according to your own situation. Then save. It's best to reboot again.

That's it.

I haven't used the wireless router, but I can tell you the use of wired, the landlord can make a reference, that is, connect the two machines to the router, and the IP of the two machines is matched with the intranet IP (you can use the two together, I helped others match it once.)

Wireless router, from the name we can know that this device has the function of routing, you may know about the wired broadband router, then we can say that the wireless router is a combination of simple AP and broadband router; With the help of the router function, it can realize the Internet connection sharing in the home wireless network, realize the wireless sharing access of ADSL and cell broadband, in addition, the wireless router can assign the terminals that carry out wireless and wired connection through it to a subnet, so that the various devices in the subnet exchange data is very convenient.

If it is a ** line, connect the cat, the cat is connected to the wireless router WAN port, if it is a direct network cable coming in, it is directly connected to the WAN port of the wireless router.

Find another jumper cable (network cable) to connect to the LAN port of the wireless router and enter it in the address bar.

The account password is generally admin Enter the wireless routing settings You can directly select the setup wizard It will guide you to set it up or set it manually.

1. WAN settings.

Set Internet access mode to PPPoE

Username and password are the passwords provided to you by the network operator (China Unicom or China Telecom or. ）

2. LAN settings.

The IP address is set to default.

Turn on the DHCP server function and DNS** and set the start and end IP address range, for example, you can not turn on the start and end of this, if you don't turn on your computer, you need to manually set the IP, it is better to turn on it for personal use).

3. Unplug the network cable and set your computer to automatically get IP and DNS

4. Turn on the wireless connection and find the name of your wireless router Connect.

Of course, it's best to set your Wi-Fi network with a password, which can be set when entering the route.

After installation, just set it up from the inside.

Let's read the manual, and first you have to use the wired setting.

You can't get internet without broadband on the construction site.

Because the wireless router is connected to the wireless router with a network cable first.

The wireless router is replacing the signal inside with a wireless signal.

Then the computer receives a wireless signal to surf the Internet.

I wish you all the best in the new year.

If you can't get on the Internet, the wireless router can just set your broadband as a wireless LAN, the built-in wireless network card of the notebook, you can receive the signal of the wireless router, if you want to go online, you must have broadband! Otherwise, you must have a wireless network card (3G is the best) to access the Internet anytime and anywhere!

Depending on how far away your home is from the construction site, the distance of the general wireless router is only about 100 meters, if it exceeds this distance, no matter how good the notebook is, it will not be able to receive the signal of your wireless router.

How to set up a wireless router.

How to install and use a wireless router:

First, connect the information and telecommunications transmission line (** line) to the cat (ADSL), and then connect the cat socket (LAN) to the wireless router. Next, go to Settings & Connect.

Problems with wireless router settings.

Let's talk about the setting of the router: first make sure that your wireless network card is enabled, and there will be a wireless network card logo in the lower right corner of the system tray (the small computer has a red cross with radiation), click the right mouse button on it and select to view the available network connection, and the control interface for searching for unlimited signals will pop up, and you can see your wireless node when you refresh it

As for the wireless router you bought, it should be configured, check whether the router has been connected to the Internet in the router's management interface, and then check the IP rules, and change the static allocation to dynamic allocation.

That should be fine

ASUS homepage. Select the notebook A8he and you can find it.

**Yes, the account password is admin

Connect to the wireless router and set it up, open it first**.

Then press the second setup wizard on the left.

Then look at the tips.

One step at a time. Then enter your online account password.

Also enter the psk code, which is the key you connect to after receiving the signal with your wireless card.

In the end, it worked.

But wait a minute to get on.

If the signal is not good, it is recommended to buy a signal amplifier, or buy a card king, which are not very expensive.

Other people's homes will not be affected, rest assured.

However, please note that when setting the password, it is set to wpa2+aes, and the password is complicated to add special characters and letters, so as to prevent being rubbed, and do not set it to wep.

So that other people can crack it, and it will rub your net.