Can the electricity connected from the socket be directly charged and wired out of the mobile phone?

The power that comes out of the socket cannot be wired directly from the mobile phone, and a socket plug is required. If you have a mobile phone charging cable, plug it directly into the socket and connect the mobile phone.

Electricity from an outlet in a home circuit cannot directly charge a mobile phone. This will damage the phone.

Mobile phone charging generally uses 5V direct current. For fast charging, you need to use 9V or 12V DC to control the charging through the intelligent control circuit.

The cable that comes out of the socket should be used through the charging head.

The electricity connected from the socket can be directly wired from the mobile phone, because if you plug the board, it can completely carry the wire for charging the mobile phone, so it can be flushed.

The electricity connected from the socket can be directly connected to the mobile phone charger to charge the mobile phone.

Due to the high voltage, it cannot be used directly to charge the mobile phone, and you need to find the charging plug.

If the wire drawn out of the wall socket belongs to AC 220 volt electricity, it is absolutely not allowed to charge the mobile phone directly, so that the mobile phone can be damaged directly.

Yes, it's all 220V electricity, if it's 380V industrial electricity.

If you come out, can you charge some mobile phones? I feel that this is okay, because as long as there is an electric current passing through it, it can be charged.

This is not possible, its current is different, and the voltage is not the same.

There must be a transformer or other adapter in the middle, such as a charger, and the voltage is different and will burn out the external electrical appliances.

If you don't know the size of the voltage, it's best not to charge indiscriminately, it is easy to burn out the charger and mobile phone, and the mobile phone should be kept at a voltage of 220V and charged with the voltage of the same mobile phone configuration model.

Is there a special socket for charging mobile phones? If you have it, you can pick it up, but if you don't, you can't, and as far as I know, it's still a bit difficult.

Can the electricity connected from the socket be directly charged to the mobile phone wire, which is not necessarily.

The next store can also be charged on the left side of the direct charge.

When the mobile phone charger is working, the voltage of 220V will drop to about 5V, which requires it to have sufficient voltage resistance and insulation, but with the increase of time and use, the materials on the charger will continue to age. The act of not unplugging the charger for a long time will accelerate the aging process of the charger, which will increase the possibility of short circuits and voltage breakdowns of the charger.

The hazards of being plugged into the socket all the time are:

1.The charger has been plugged into the socket, although it does not charge the phone, but the circuit board inside the charger is energized, so the charger is in working condition and will consume power.

2.Let the charger be plugged into the socket for a long time, because the charger is composed of electronic components, there will be microcurrent through the socket all the time, which will cause heating for a long time, which is easy to cause the old fiber of the components, and some will also have a short circuit, which will greatly shorten the life of the charger.

3.The charger has been plugged into the socket, if the charger is of inferior quality, its own heating is serious, plus its own living environment is closed and the weather is hot in summer, it is easy to create an environment for the charger to spontaneously combust and explode.

It is not good for the mobile phone charger to be plugged into the socket all the time, and in the absence of power failure, the switching power supply is not completely disconnected in the case of no output. If the internal components are inferior or the design of the switching power supply is unreasonable, the charger electric coil will heat up, and the insulator will fall off and be damaged.

Even if it is a regular brand charger, if it is plugged in the plug-in board for a long time, it will also heat up, and many families are now plugged in not only a mobile phone charger on a plug-in board, but also plugged in digital cameras, computers, video cameras, electric fans, air conditioners and other plugs.

Therefore, not pulling out the charger for a long time will not only cause unnecessary power consumption, but also easily make the charger age, causing fire, cracking, accidental electric shock and other accidents.