Midea air conditioner shows what dust is full, and Midea air conditioner shows what to do when dust

The display of "full of dust" indicates that the return air filter of the air conditioner is very dirty, and there is a lot of dust on it, resulting in a small air volume of the indoor unit of the air conditioner and a large pressure loss of the return air filter. At this time, you need to remove the return air filter of the indoor unit of the air conditioner and clean it, dry the water and then install it back. Shows how the dust is removed:

If there is dust full, clean the dust filter of the indoor unit according to the manual, and there is still dust after installation, as long as you press the "digital display" button, there will be no more. Extended Information: Midea's solution to the dusty air conditioner:

1. Conventional method 1, remove the filter screen (1) Before cleaning the air conditioning filter, cut off the power supply of the air conditioner to ensure the safety of the cleaner, which should be taken to heart. (2) When using a tool to disassemble the wall-mounted air conditioner panel, there is a hidden handle on both sides of the indoor unit, and the panel can be lifted with a little force with both hands; When opening the panel of the cabinet, you need to disassemble the lower part of the cabinet, and after opening the panel of the air conditioner, you can take out the air conditioner filter and clean it. 2. Clean the filter air conditioner filter can not be directly washed with water, nor can it be washed with dusty side, you can prepare a scrubbing tool, use a soft brush to clean, it is best to brush along the lines, do not wash at will, will destroy the structure of the filter.

3. Drying the filter (1) After cleaning the air conditioning filter, tighten it with one hand, shake the water droplets on it a few times, then wipe it with a soft towel, and finally put it in a cool and ventilated place to dry. (2) Do not put the filter in the sun for exposure, because the high temperature of the sun will destroy its material and shape, wait for the filter to dry, and reinstall the air conditioner. 2. Basic method 1, cleaning of internal parts (1) When the air conditioner is cleaned, when the air conditioner filter is removed and cleaned, the internal parts of the air conditioner may be cleaned by the way, and the special cleaning agent for the air conditioner may be needed to spray the special cleaning agent for the air conditioner evenly on the condenser of the air conditioner, spray it well, and close the air conditioning panel.

2) Wait for 10 minutes, turn on the air conditioner, run it for 30 minutes, adjust the air volume and cooling capacity of the air conditioner to the maximum, and the cleaned stains will flow out with the condensate of the air conditioner and be discharged to the outside of the air conditioner. If you clean the air conditioning filter regularly, it is generally very clean as long as you brush it, but if you accumulate a lot of dust, you should clean it carefully, you can soak it in the cleaning solution for more than ten minutes, but you must use neutral detergent, not corrosive washing liquid, so as not to deform or even damage the filter. After soaking, use a brush to brush the stolen goods and then rinse them with water, and wipe them dry after cleaning the Midea air conditioner filter, but not in the sun.

The dry filter can be installed back into the body, open the lid and put it in along the chisel, and then knock it on to close the lid. After installation, it is necessary to turn on the machine to see if it is running normally, and if there is no abnormal condition, you can use it with confidence. Generally, after running for a long time, the air conditioner will easily absorb dust, dirt, etc., which will not only affect the performance and effect of the air conditioner, but also increase energy consumption and even reduce the service life, so don't try to save trouble and not clean and maintain the air conditioner.

If there is too much dust on the condenser of the external machine, the mode will be turned on to automatically protect, do not clean the detergent for air conditioning, because the detergent has chemical components in it, which will destroy the evaporator of the internal machine, and it can be cleaned with water or detergent. It is recommended to find a professional to clean it.

How to deal with the air conditioner dust and light onMethod 1: 1. First cut off the power supply 2. Disassemble the lower part of the cabinet; If it is hang-up, there are two hidden handles (grooves) on both sides of the indoor unit, and you can lift the panel outward with a little force with both hands. If it is a cabinet machine, there are two plastic decorative caps on the plastic fence of the air inlet panel at the lower part of the machine, and the fixing bolts will be exposed when the decorative caps are removed, as long as the fixing bolts are removed.

3. Attention! It is said that the air inlet filters are made of nano materials, so it is necessary to clean them correctly, and use a soft brush to brush and shoot along the lines, and it is better not to wash with water. 4. Find the screw position or some of them are through a card position to strengthen the shell, and you can see the dust filter after disassembling the shell.

5. Remove it, clean it with water, dry it and put it back on. Burning and vertical destruction treatment method 2: 1. When cleaning the air conditioner, when removing the air conditioning filter for cleaning, the internal parts of the air conditioner should also be cleaned, and then it is necessary to use a special cleaning agent for the air conditioner.

At this time, the special cleaning agent for air conditioning is evenly sprayed on the condenser of the air conditioner, after spraying the cleaning agent, close the air conditioning panel, let it stand for about 10 minutes, and then turn on the air conditioner to make the air conditioner run for 30 minutes, adjust the air volume and cooling capacity of the air conditioner to the maximum, and then the cleaned stains will be discharged out of the air conditioner with the flow of condensate from the air conditioner. 2. After cleaning the air conditioner, if the Midea air conditioner is still full of dust, then you can press the digital display button on the remote control of the Midea air conditioner to eliminate the phenomenon of the dust lamp, if the Midea air conditioner is still full of dust, etc., then you need to press the digital display key to reset, and at the same time, the running time of the indoor unit air conditioner will be cleared, and the fiber service will be re-timed, and then the phenomenon of the air conditioner full dust light can be eliminated.

The Midea air conditioner shows that the return air filter of the air conditioner is very dirty, and there is a lot of dust on it, which causes the air volume of the Senzhi machine in the air conditioner room to become smaller, and the pressure loss of the return air filter is too large, reminding the user to clean the filter.

"Dusty" pants elimination solution: use the remote control to operate, the machine is turned on and press the "digital display" button on the air conditioner for about 6 seconds, release, and then press the "digital display" button again, and the "dust" can be eliminated.

If Midea's air conditioner shows that the dust is full, you can follow the steps below to deal with it::

1.Turn off the power of the air conditioner, unplug it, and wait for the electronic components inside the air conditioner to discharge.

2.Turn on the air conditioner panel and take out the air filter.

3.Use a vacuum cleaner or a soft-bristled brush to gently clean dust and debris from the surface of the filter.

4.If the filter is very dirty, you can rinse it with clean water, but don't use soap or detergent.

5.Wait for the filter to dry completely before reinstalling it on the air conditioner panel.

6.Turn off the air conditioner tracking sock search panel, plug in the power supply, and turn on the air conditioner.

7.Check that the air conditioner is working properly, and if it still shows that the dust is full, the filter may need to be replaced.

Notes:1When cleaning the filter, do not use too much force to avoid damaging the filter.

2.When cleaning the filter, do not directly rinse the inside of the air conditioner with water to avoid causing a short circuit in the circuit.

3.Cleaning the filter regularly can ensure the normal operation of the air conditioner and prolong the service life.

If there is too much dust on the condenser of the external machine, the mode will be turned on to automatically protect, do not clean the detergent for air conditioning, because the detergent has chemical components in it, which will cause the evaporator of the internal machine to be damaged by the collapse of the car, and it can be cleaned with water or detergent. It is recommended to find the crack and have it cleaned by a professional.

Midea's air conditioner prompt is not a fault, it is a humanized prompt setting of the air conditioner, and the default machine on the main control board will appear after a total of 200 hours of work. If there is a "dusty" prompt to ensure that the filter is clean, press the "digital display" button on the remote control of the air conditioner to reset the meter. Here's how to fix it:

1. Unplug the power of the air conditioner to ensure the safety of the air conditioner.

2. Remove the return air cover (the hanging machine stool is on the top of the indoor unit, and the cabinet is generally at the bottom of the front) to see if there is any dust blockage.

3. If there is too much dust on the filter screen, take it out and clean it with a professional cleaning agent (many air inlet filters are made of nanomaterials, it is best not to wash it with water), wipe it dry and put it back.

4. If the filter is still full of dust after cleaning, click the "Digital Display" button on the remote control to reset the timer, and the "Dust Full" of the display board will disappear.