What to do if the air conditioner s display is full of dust, and what to do if the air conditioner s

There is too much dust on the filter screen of the indoor unit, so you can remove it in time. Tools needed: brush, laundry detergent, rag.

The specific steps are as follows: 1. Unplug the power plug of the air conditioner, disassemble and assemble household appliances, and disconnect the power supply no matter what electrical appliances. Even if you plug in the plug and don't turn on the power, you are afraid of accidents caused by leakage and static electricity, so be sure to turn off the power!

2. Lift both sides of the air conditioning panel upwards, open the air conditioning panel, and make a slight move. 3. When you see the filter inside, you can easily remove it with a gentle push up, and remove both filters. 4. Then prepare a soft brush, go to the bathroom and rinse it slowly with clean water, and turn on small water.

5. Brush the dust on the surface almost clean, take some laundry detergent, sprinkle the filter screen, and continue to clean with a brush. 6. Clear and clean, you can use a dry cloth to dry the water. The rag chooses the cloth that does not shed hair, otherwise it is not easy to clean up.

7. After the cleaning is completed, wait for the filter to dry and then install it in the original position of the air conditioner. 8. Finally, buckle the panel of the air conditioner back to its original position, pay attention to the correct position, and buckle all the buckles.

You need to clean the filter, use a toothbrush or a fine pen, wet wipes and other tools to clean it, the air outlet and the maple leaf roller impeller after taking out the filter, see that the evaporator is dirty and dirty, just pour a few cups of water, and then clean the sink to prevent some residue from blocking the drain, you can also use the plastic drain pipe to blow the air conditioner to check if there is a blockage. If you hear the sound of air flow or blisters in the inner set, it means that the drain pipe is unobstructed, if the external unit needs to be cleaned, you need to unplug the power supply of the air conditioner, and then find a car wash water pipe connected to the tap water for flushing, and then take a brush to scrub it, which is dirty, our circuit in the cleaning process, must not be wet, to prevent the air conditioner from rusting, such a situation. It is recommended that when using the air conditioner, it must be cleaned regularly to avoid the occurrence of malfunctions.

The air conditioner shows that the dust is full of the following solutions:

When the cumulative running time of the air conditioner is greater than 200 hours, the dust full light of the air conditioner will be on, reminding the air to adjust the dust and clean the filter. If the dirt in the air conditioner is not treated in time, it will affect the normal use of the air conditioner, and will increase the loss, so that the service life of the air conditioner will be greatly shortened.

Steps: 1. Turn off the power of the air conditioner.

When the air conditioner needs to be turned off, it is necessary to use the normal shutdown procedure and then unplug the outlet with energy.

2. Open the filter hatch cover of the air conditioner.

If you want to do it, you can refer to the manual if you are not familiar with it, the filter hatch cover of the cabinet machine is under the machine, and it should be pulled in front of you, and the hatch cover of the hang-up machine is pushed up; In addition, the louvers of the air inlet of the air conditioner need to pump the spring bolts on both sides to the middle at the same time.

3. Extract the filter located in the hatch.

Usually the filter screen of the cabinet machine is made of nylon mesh, and some ** air conditioners have activated carbon filter and nylon mesh filter at the same time, pay attention to distinguish.

4. Clean and dry the filter.

The nylon mesh filter is first washed off with clean water to remove a large amount of ash and dust, and then evenly sprayed on the surface of the filter with a cleaning agent diluted with water, waiting for 10 minutes, then brushing with a fine brush, and finally rinsing it with low-temperature water. The activated carbon filter cannot be washed with bad water, and it is often replaced directly, or it can be continued to be used after exposure to the sun.

5. Clean the evaporator.

The cleaning of the evaporator mainly depends on the degree of its contaminant coverage, if there is obvious oil and dust on the fins, it is necessary to use a special cleaning agent, and then use a high-pressure water gun to rinse it.

6. Put the dried filter back into the filter cabin.

The cabinet wall mount machine restores the power supply, ** air conditioner, you need to press the "reset" button on the LCD panel.

1. After the air conditioner is used for a period of time, the word "dusty" will be displayed on the screen, although it does not affect the daily use of the air conditioner, it will still make people doubt that "the air conditioner is broken". The reality is that the air conditioner is not damaged, it is just a user-friendly feature provided by the manufacturer to remind the user to clean the filter in time.

2. "Dusty" solution method: use the remote control to operate, turn on the machine and press the "digital display" button on the air conditioner for about 6 seconds, release it, and press the "digital display" button again, and the "dust" can be eliminated.

3. The appearance of "dusty" fiber deficiency is mainly to remind users to clean the filter. Many people do not pay attention to cleaning the filter, and even do not pretend to know the consequences of not cleaning the filter for a long time: first of all, it may affect the operation and refrigeration effect of the air conditioner, resulting in a decrease in air volume and poor refrigeration effect, which will affect the service life of the air conditioner, and secondly, the air inhaled by the air conditioner when working contains a certain amount of dust, mites, viruses and other harmful substances, some of them adhere to the filter screen, and if the filter is not cleaned for a long time, such bacteria and fungi will breed inside the air conditioner, resulting in mildew and even odor. It pollutes the indoor air-conditioning environment and affects the health of the family.

When the air conditioner is used for a long time, it will show that the dust is full, and many users do not know how to deal with it, so we will teach you how to operate it.

01 Turn on the air conditioner and press and hold [Digital Display] for two seconds to eliminate the display of [Dusty].

01 Before cleaning the return air filter, the power supply of the air conditioner should be disconnected.

02 Open the buckle of the return air filter and take out the return air filter.

03 Use water to rinse off the dust.

04 After drying the water, install the return air filter.

It is necessary to clean the dust accumulated on the return air filter screen of the indoor unit and eliminate the "full dust" display before it can be used again.

The air conditioner displays "full of dust" to remind the user that the return air filter needs to be cleaned, not the fault of the air conditioning unit. At this point, all you need to do is clean the filter and restore the air conditioner.

It is recommended to find the instruction manual that comes with the air conditioner manufacturer, and find the operation method to eliminate the dust full display.

The air conditioner shows that the dust stool is full and the handling method is as follows:Material preparation: air conditioner filter, air conditioner, brush, remote control, etc.

1. Turn off the air conditioner and unplug the electric jujube next to the closed source.

2. Open the air conditioner hood and remove the air conditioner filter.

3. Clean the air conditioner filter with air conditioner cleaner and dry it.

4. Install the air conditioner filter.

5. Plug in the power supply and press the digital display button on the remote control.

Summary. If the dirt in the air conditioner is not treated in time, the air conditioner dust indicator will be lit up, and dust removal work must be carried out at this time.

In the past, there will be dust attached to the fuselage, surface and internal system of the air conditioner, if the dirt in the air conditioner is not treated in time, then the air conditioner will be full of dust indicator light will be lit, and the noisy shed must be dusted.

Before taking the air conditioner dust removal operation, you first need to cut off the power supply of the air conditioner, and then open the lid of the air conditioner, you can see the filter inside, most of the dust is deposited or attached to it.