What s going on with the Midea Leng Junxing air conditioner showing that it is full of dust?

Displaying the "Dusty" icon is a normal display state with the "Dusty" prompt function in Midea's air conditioner products. Prompt the user to clean the filter.

This function is designed to remind the user that the cumulative running time of the indoor fan has been greater than or equal to 200 hours since the last indoor fan cumulative operation time was cleared. “

When the "Dusty" icon is displayed, the user can decide whether to clean the filter screen of the indoor unit of the air conditioner according to the actual operating status of the indoor unit of the air conditioner, so as to reduce dust or other debris adsorbed on the filter screen, prevent the filter from clogging the perforation, and maintain the smooth air circulation of the indoor unit of the air conditioner.

How to clear the display of the "Dusty" icon: When the machine is turned on, you can clear the display of the "Dusty" icon by short-pressing the "Digital Display" button on the remote control (the key pressing time does not exceed 1 second), and at the same time, the cumulative running time of the indoor fan will be cleared.

The above method of clearing the display of the "Dust Full" icon has been written into the "Installation and Instruction Manual" of the air conditioner with this function.

1. The dust of the air conditioner is not a fault, the dust display is the humanized prompt setting of the air conditioner of the United States, the default machine work of the main control board for a total of 200 hours This prompt will appear, after making sure that the filter is not dirty or cleaned, press the remote control "digital display" button to reset and re-time, the manual also has this function introduction, users can refer to or understand before use.

2. Solution:

1.First of all, the anti-power cut-off.

2.Disassemble the lower part of the cabinet; If it is hang-up, there are two hidden handles (grooves) on both sides of the indoor unit, and you can lift the panel outward with a little force with both hands. If it is a cabinet machine, there are two plastic decorative caps on the plastic fence of the air inlet panel at the lower part of the machine, and the fixing bolts will be exposed when the decorative caps are removed, as long as the fixing bolts are removed.

3.Note that it is said that the air inlet filters are made of nanomaterials, so it is necessary to clean them properly, and use a soft brush to brush and shoot along the lines, and it is best not to wash with water.

4.Find the screw position or some of them are through a clamp position to strengthen the shell, after disassembling the shell, you can see the dust filter, and clean the dust filter.

According to the specific problem type, the steps are disassembled, the cause is analyzed, the content is expanded, etc.

The specific steps are as follows: The main reason for this is ......

The dust is to remind the user to clean the filter. Many people don't pay attention to cleaning the filter, and they don't even know the consequences of not cleaning the filter for a long time.

First of all, it may affect the operation and cooling effect of the air conditioner, resulting in a decrease in air volume and poor cooling effect. Failure to clean the filter for a long time will allow such bacteria and fungi to breed inside the air conditioner, resulting in mildew and even peculiar smells, which will pollute the indoor air conditioning environment and affect the health of family members.

When cleaning the air filter, it should be rinsed under the tap and should not be cleaned with hot water above 40 to prevent shrinkage and deformation. After cleaning, shake off the water on the filter screen, insert it into the panel and install the air conditioner. That's it.

A dusty air conditioner is not a fault. The dust-filled display is a user-friendly prompt setting for Midea's air conditioner. By default, when the machine has been working for a total of 200 hours, the prompt will appear on the main control board.

After making sure that the filter is not soiled or cleaned, press the "Digital Display" button of the remote control to reset and re-time. This function is also introduced in the manual, so users can refer to or understand it before using it.

What to do if the beautiful air conditioner is full of dust?

First method:

1.First, reverse the power outage;

2.Disassemble the lower part of the cabinet; If you hang up, there are two hidden handles (grooves) on both sides of the indoor unit, and you can lift the panel slightly outward with both hands. In the case of cabinet units, there are two plastic decorative caps on the plastic fence of the air intake panel at the lower part of the machine.

Pull out the trim cap to reveal the retaining bolts, simply remove the retaining bolts.

3.Attention! It is said that the air intake filter is made of nano material and should be cleaned properly. It is best not to rinse with water, but to brush and pat along the side of the grain road with a soft brush.

4.Locate the screw location or some of them are fixed by the card location. After disassembling the shell, you can see the dust filter;

Take it off, wash it with clean water, dry it, and put it back.

The second method:

1.Remove the filter first, and then patiently spray the condenser (the one with white aluminum flakes) in the wall-mounted or cabinet air conditioner with the air conditioner's special cleaning agent until the water flowing out of the water pipe is clean (spray the cleaning agent once, then spray it with clean water twice, and so on).

2.Clean the filter to resolve the issue. If dust and light still appear after cleaning the filter, you can press the digital display key on the remote control of the Midea air conditioner to eliminate dust and light.

3.After doing the above steps, the air conditioner will still show that it is full of dust. At this time, you only need to move your finger lightly and press the "Digital Display" button of the remote control to reset, and the cumulative running time of the indoor fan will also be reset to zero. Retiming can be eliminated.

- Is the air conditioner malfunctioning? With my 8 years of experience in repairing air conditioners, I will tell you how to solve these faults, which should save you a lot of detours.

When encountering a failure of the air conditioner, we must strictly follow the scientific procedures, and do not act blindly and disassemble at will when the situation is unclear, the fault is unclear, and there are countless in the heart. The consequence of this often amplifies existing faults, increases operating costs, shortens the normal service life of equipment, and leads to early scrapping of equipment.

The air conditioner is not refrigerated or does not refrigerate.

This problem is most common, and the lack of fluorine in air conditioners is the key.

When the machine is turned on, first touch the trachea and judge it by the temperature.

If it is cold, the speed of the fan may be low.

The inner tube scales and dust are cleaned or replaced.

If the inner tube is not considered cool, the thick tube may be flattened.

The return air temperature is not cool, and then touch the intake air to judge.

The air intake is cold and frosty, and fluoride is added to try again.

If the frost slowly disperses, it is a good decision to lack fluoride.

It is not difficult to see the aging of the press, and the lack of exhaust is the key.

Four-way gas is also commonly judged by fluoride collection.

High-pressure scales must be seen to be dirty, and they will be slow to refrigerate.

- Finally, I wish the work to go well, fix the air conditioner as soon as possible, and live a happy ———

- If you think it's good, please adopt the answer, give a good review, and wish you a better life———

The air conditioner shows that the dust is full and not refrigerated, you need to clean the filter, there are two small gaps on both sides of the hang-up, use two hands to pull it open, (there is a kind of dare to not open, you have to use a lot of strength, don't be afraid) and then take out the filter screen, rinse it with water.

After some air conditioners have been running for 200 hours, they will display "full of dust" to prompt the user to clean the filter, and the cleaning filter can be eliminated by aiming at the air conditioner with the remote control and pressing the "digital display" button. If there is no digital display, it can be turned off by the screen display. Or read the manual to operate.

Some high-end machines have a dust removal function on the remote control, if you don't please clean the filter by yourself, the installer is obliged to inform you when installing.

When the air conditioner is faulty, it is necessary to follow the procedures to do things, and do not act blindly and disassemble at will when the situation is unclear, the fault is unknown, and there are countless in your heart. Doing so may magnify existing faults and shorten the life of the equipment.

Midea Leng Junxing air conditioner shows that it is full of dust, usually because a large amount of dust and dirt has accumulated on the air conditioner filter, resulting in blockages and blockages. In this case, you need to perform the following troubleshooting and cleaning:

1.Turn off the power of the air conditioner: First of all, you should turn off the power of the air conditioner and pull out the plug to avoid the danger of electric shock during cleaning operations.

2.Remove the filter: Open the lid of the air conditioner or indoor unit, find the filter position, and easily twist the edge of the filter box to remove it.

3.Clean the filter: Clean the filter with a brush or tap.

If the dust is heavy, you can use a vacuum cleaner or a soft-bristled brush to clean it. It is important not to clean with hard or chemically contaminated Peihong cleaners to avoid damaging the filter network.

4.Install back to its original position: After the air conditioner filter is cleaned, install the filter as it is and close the air conditioner cover, then restore the power supply and turn on the machine normally.

It should be noted that you should also pay attention to your own safety during the cleaning process, especially when touching the inside of the air conditioner, you must remember not to pull and touch the electrical parts to avoid accidents.

Midea Leng Junxing air conditioner shows that the dust is full, which usually means that the filter or filter slider of the air conditioner needs to be cleaned or replaced. When the air conditioner's filter or filter is clogged or accumulates excessive dust, dirt, and impurities, the air conditioning system detects the status of the filter and displays it"Dusty"or similar tips.

To solve this problem, you can take the following steps:

Turn off the air conditioner: First, turn off the air conditioner and disconnect the power supply to ensure safe operation.

Clean the filter: Locate the filter or filter inside your air conditioner. They are usually located on the front or side panels of the air conditioner.

Remove the strainer or filter and clean it as directed in the instruction manual. You can use a vacuum cleaner or clean water to rinse the filter to remove dust and dirt. Make sure the filter is completely dry before putting it back in the air conditioner.

Replace the filter: If the screen or filter cannot be cleaned effectively or has been damaged, it is recommended to replace the filter with a new one. Follow the instructions provided in the manual to find the correct filter for your aircon model and replace it.

Turn the air conditioner back on: After the filter has been cleaned or replaced, put the filter or filter back into the air conditioner properly. Then reconnect the power, turn on the air conditioner, and reset the one on the display"Dusty"Prompt.

Please note that regular cleaning and maintenance of your aircon's strainer or filter is an important step in maintaining aircon performance and air quality. It is recommended to follow the instructions in the user manual for regular cleaning and change the filter in time as needed to ensure the normal operation of the air conditioner and clean air output. If the problem persists or further help is needed, please consult the after-sales service or professional maintenance personnel of Midea Leng Junxing Air Conditioner.

Turn the air conditioner off and unplug it.

Pick out the two card slot cards on the air conditioner shell with your hands, and Yunbi opens the outer cover.

Gently push the filter up with your hand and take it out.

Clean the filter with clean water or mild detergent. Be careful not to wash with hot water or a stiff brush to avoid damaging the filter.

Dry the filter and return it to its original position, insert it into the panel and install the air conditioner.

Turn on the empty celery adjustment, and quickly press the "Digital Display" button on the remote control to eliminate the dust full prompt.