What does it mean to have a dusty air conditioner and a light on

It refers to the fact that there is too much dust inside and needs to be cleaned up. However, after the cleaning is completed, the indicator light will not go off automatically, and it needs to be eliminated by remote control. First find the digital display button on the panel, and then press and hold for about six seconds, and the indicator light will go off.

However, since the remote control panel of each air conditioner is different, for those without digital display buttons, you can find a screen display to solve it.

The reason why the air conditioner will be full of dust is mainly caused by excessive dust accumulation inside. In this case, we need to cut off the power supply first to ensure the safety of our lives. Then remove the filter to clean it, or clean it with a special cleaning agent, and finally install it back.

If you want to avoid this in the future, you need to clean it up regularly.

Hello landlord. This light is not a problem with the air conditioner, but the air conditioner is too dirty, just clean the filter.

It is recommended that the landlord read the explanation of some phenomena on the manual.

Hope it helps, satisfied.

The following is how to deal with the air conditioner with dust and lights on.

1. When the dust accumulates to a certain extent, the air conditioner will have a dusty indicator light prompt. At this time, it is necessary to clean up the dust of the air conditioner, and you can also clean it regularly according to your own use.

2. Unplug the power plug of the air conditioner before cleaning up the hang-up. When repairing all kinds of electrical appliances, this kind of safety common sense is a must.

3. There is a gap on both sides of the hang-up air conditioner, and this gap can be opened. Gently open both ends, and you can basically do it by hand.

4. Then gently lift the lid of the air conditioner, and you will find two filters. Dust is deposited on these two filters.

5. Gently remove it, and pay attention to the position of the bayonet facing down (pay attention to the direction of installation when installing). Once removed, wash the strainer with soapy water and dry the water or blot it with an absorbent cloth.

6. Install the filter screen and pay attention to the installation direction. Once everything is back to its original state, connect the power supply. At this time, turn on the air conditioner, and the wind will be higher than before. And the dusty hints are gone.

Summary. Hello, dear. When the air conditioner is full of dust, the situation where the lights are on is due to the following reasons:

1. The air conditioner filter needs to be cleaned: The function of the air conditioner filter is to filter the dust and pollutants in the air and prevent them from entering the air conditioning system. 2. The air conditioning system needs to be maintained

In addition to filter cleaning, the air conditioning system requires additional maintenance work.

It has been cleaned and the reset button has been pressed.

Useless. Hello, dear. When the air conditioner is full of dust, the situation where the lights are on is due to the following reasons:

1. The air conditioner filter needs to be cleaned: the function of the air conditioner filter is to filter the dust and pollutants in the air and prevent them from entering the air conditioning system. 2. The air-conditioning trap system needs to be maintained

In addition to filter cleaning, the air conditioning system requires additional maintenance work.

Useless. I searched.

Now there is another reason, fault prompt: some air conditioning systems are equipped with fault indicators, when the system fails, they will be searched. If the light on your aircon panel is abnormal, the system has detected some kind of fault or error.

No, there's nothing out of the ordinary, I've encountered it before, but I forgot how to do it.

1. Check the settings of the air conditioner's stupid panel: Check the settings on the air conditioner panel, and make sure that there is no accidental operation or wrong settings. Make sure you choose a rock mill with the appropriate mode (e.g. cooling or heating), temperature and wind speed settings.

2. Restart the air conditioning system: Turn off the air conditioning system completely and disconnect the power supply, then wait for a few minutes and turn it back on. 3. Check the power supply**:

Make sure that the power supply** to the air conditioning system is working properly and that there are no power outages or loose power cord issues.

Do you have a reboot or will the light come on.