How to solve the problem of waterproof composite flooring soaked in water?

Here's how to deal with it:1. If the soaking of the composite floor is not very serious, then you can use absorbent tools to absorb the moisture on the surface of the composite floor, such as dry rags, sponges, vacuum cleaners, hair dryers, etc. If you use a hair dryer, use cold air to prevent the floor from deforming.

2. If the soaking situation of the composite floor is more serious, then you can't deal with it, and you must contact professional after-sales personnel to deal with it. And different laminate flooring has different repair methods, so special attention should be paid to.

3. If you need to replace the floor locally, you should contact the workers to come to the door to communicate with the specific situation of the floor, and then choose the floor of the same model and the same suit color for paving, so as not to affect the aesthetic effect of the floor.

There is not much water on the surface, find it in time, dry it quickly, and dry it naturally; After mopping dry, it is found that part of the leakage, blistering at the corners, if there is no major problem after the bottom is dry, it can be waxed and maintained; If there is non-negligible deformation and swelling, it needs to be dismantled or replaced and re-paved. If the ground floor has been soaked in water, you need to get up the floor immediately, wipe it dry and dry, and the bottom water should be dried immediately to prevent it from seeping downstairs.

Due to poor waterproofing or pipeline leakage and infiltration, long-term soaking in water causes deformation and mildew, and the corresponding reasons need to be dealt with (or the responsible person can be compensated), the situation is generally not large, and can be partially replaced according to the situation.

Burst pipe (directly poured on the board, or overflowing out of the kitchen and bathroom room) causes a large area of soaking, which needs to be treated according to the situation after the floor is dried: the floor with better quality or waterproof function has less deformation and swelling, and can be repaved back, pay attention to the installation from the middle of the ground to the wall, first install the floor with small deformation and relatively flat, and place the deformed floor in a hidden position or at the skirting board by the wall; Laminate flooring is often difficult to restore to usable level, and it is recommended to replace it directly.

If the requirements are not high, dry in the shade or absorb water with desiccant, and use sanitary balls to eliminate mildew. It is recommended not to use the floor at the door of the kitchen and bathroom where there is damp and often have water, but to use floor tiles or stone to pave the floor.

Now the most important thing is to keep the floor as deformed as possible while drying it is crucial. After the surface water of the floor can be wiped dry, it should be placed in the shape of "well" superposition, and the weight generated by its stacking can be used to prevent deformation, and the reverse side of the floor should be paid attention to when placing it to prevent the surface from drying out due to rapid drying, and at the same time, it should not be exposed to the sun, it should be placed in a ventilated place to dry, and under normal circumstances, it can be used again for solid wood and multi-layer solid wood with good quality. If your floor has been impregnated with wax treatment is very large and can be restored to its original appearance, if it has not been impregnated with wax or coated with wax, it may be a little slower, and the after-sales service office of the floor should be notified as soon as possible when water leakage occurs, and the staff will provide the best solution to the owner in combination with the floor's own situation.