How to remedy laminate floor hollowing? How to remedy hollow wooden floors?

First, the reason for the hollowing of the wooden floor.

1. The original ground is not cleaned, the paving mortar has too much moisture, and the workers are not skilled enough.

2. The moisture content of the surface wood floor is high or low. When it is high, the wood floor will lose moisture in the dry air, and the section will shrink and warp and deform. When the wooden floor is low, it absorbs the moisture of the air after laying and produces arching.

3. If the moisture-proof layer is not paved or the floor is left with ventilation holes on Thursdays and Sundays, the internal moisture cannot be discharged in time after the surface layer is laid.

4. After the gap is opened at the end of the wool floor or the gap is too small and expands by moisture, the surface layer board will bulge and deform.

Second, the wooden floor has a hollow drum treatment method.

The solution to the bulging of the wooden floor is to cut it and take it out and re-paste it.

1. If it is not a deformed hollow drum, it must be that the floor has not been leveled before installation, and the deformed wooden floor can be opened and re-leveled;

2. If it is a deformed hollow drum, it is a problem with the quality of the floor, and there is no way to re-pave, only to replace the floor with problematic quality.

I hope it can help you, and if you still have questions, click on the avatar and wait for you to tease

First of all, let's find out the reason for the hollow floor:

1.The ground is not cleaned (the old ground has to be chiseled and brushed with cement grout), and the cement mortar pasted with floor tiles cannot be closely combined with the ground;

2.The proportion of cement mortar is wrong, the proportion of sand is too high, or no adhesive is added to the mortar;

3.The proportion of water added to the cement mortar is too high, and the cement mortar will gradually detach from the floor tiles during the drying process;

4.Before laying the floor tiles, it is necessary to be permeable, otherwise it is easy to hollow.

5.When the workers are paving the floor tiles, they do not use the rubber hammer to hit the floor tiles, so that the floor tiles and cement mortar are tightly combined, and it is also easy to appear hollow;

6.Without maintenance, the strength of the mortar is not strong enough, resulting in hollowing. After the floor is paved, it should be maintained with materials such as sawn wood ash to keep it moist for a week;

7.After the floor tile is paved, the cement mortar is trampled on the floor tile without drying, which is one of the main reasons for the hollowing of the floor tile.

If there are too many hollow floor tiles, they will gradually be broken after long-term use, which will not only affect the appearance, but also affect the use.

If it is a small amount of hollow drums, a small amount of re-laying. If it is a large number of hollow drums, they must be re-laid.

The expansion joint between the floor and the wall is small, and the thermal expansion and cold contraction will be like this, find the direction of the kicking along the bulging floor, pry the skirting open, and read whether the expansion joint has been pasted to the wall.

For the expansion joints caused by the composite floor bulging, it is affected by the principle of thermal expansion and cold contraction, it is not recommended to deal with it by yourself, this situation can be repaired by the manufacturer, the area involved in the self-treatment will be relatively large, or the problem of floor bulging is still prone to occur in the later stage, and the floor needs to be re-paved.

Types of laminate flooring:

1. Laminate flooring.

Laminate flooring is generally made of thermosetting amino resin with different layers, which is pasted on the floor substrate such as high-density board. The back of the floor is covered with a moisture-proof layer, and the front is covered with a decorative layer and a wear-resistant layer, and then pressed at high temperature.

This kind of flooring raw material is processed by wood chips, which breaks up the original structure of the wood, effectively avoids the cracking and deformation of the floor caused by thermal expansion and contraction, and has excellent stability. At the same time, it has good wear resistance, easy to take care of, many colors to choose from, beautiful appearance, and is also suitable for floor heating space.

2. Parquet.

Solid wood parquet is made of various wood decorative layers for staggered pressing, with low moisture content and good stability. This type of flooring retains the natural texture and feel of solid wood flooring, while also combining the abrasion resistance and strength of laminate flooring.

Parquet has a certain environmental friendliness, and thanks to the UV paint on the surface, it is very convenient for daily cleaning. The core material of the floor is fast-growing wood, which reduces the production cost a lot, and the parquet** is more affordable than the solid wood floor.

In life, some people's homes are equipped with wooden flooring, laminate flooring, etc., which bring many benefits to people's lives, but they may also encounter troubles. For example, if the floor is soaked in water due to the bursting water pipe at home, the floor will also be soaked in water, and then it will be properly bulging, which is much worse than the smooth and flat effect of the normal floor. After the floor is soaked in water, many owners are also worried, afraid that their houses will be destroyed.

So, what to do if the floor is soaked and bulging?

What to do if the floor is soaked in water and bulges

a.Remove the baseboard.

Let's look at how the floor baseboard is installed, now the floor baseboard is generally installed by snap-on, and the corner line is carefully removed from the floor baseboard installed by snap-on. If the floor baseboard is installed with nails or glue, it can only be pried open with a tool.

b.Remove the floor.

The process of removing laminate flooring is relatively simple, using a flat-top screwdriver to pry the baseboard open, and then pry the corner floor along the edge of the baseboard and remove it. When removing the solid wood floor, remove the baseboard first, and then start from the corner of the wall, and use a nail hammer to pry the wooden floor up and pull it out.

c.Floors are placed back to back (please clean the floor surface carefully) and are pressed on top of each other. Place it in a ventilated and dry place to dry naturally, and you can use a fan to blow it, but do not bake or expose it to direct sunlight.

d.After the floor is dry (about 7 to 15 days, depending on the local humidity and the degree of recovery of the floor), measure the thickness of the floor and check its deformation (such as distortion of solid wood, tile change, etc.).

e.Floors that have been largely restored can be resurfaced, and floors that are slightly deformed can be resawed or laid under furniture or in areas that do not affect the overall aesthetics.

f.When dismantling and resurfacing floors, there is bound to be some wear and tear. The owner needs to supplement some flooring appropriately according to the wear and tear of the floor.

How to avoid soaking the floor with water

1.After the floor is paved, some owners will choose to ask a cleaning company to clean it, but some unprofessional cleaning companies use the cleaning method of washing the floor (or using an unwrung out mop), resulting in the floor being damp and deformed.

2.The negligence of the owner in the process of use, the local water immersion in home life will also cause the floor to be damp and deformed, such as water pipe leakage, hidden pipeline water seepage, heating pipe leakage, water dispenser leakage, bathtub leakage, etc. The owner forgot to close the windows when he went out, and the rainstorm caused the rainwater to seep into the ground from all directions such as exterior walls, balconies, toilets, ceilings, etc., causing the floor to be damp and deformed.

3.The deep ground is not dry, due to the rush of the construction period, forced paving, especially when the interior decoration and cement place, although the surface is dry, but in fact the deep ground is still very wet, please pay special attention to this.

What to do if the floor is soaked in water and bulgesThe floor soaking should be able to be repaired in time, even if there is no difference on its surface, it is necessary to disassemble the floor to see the inside, there must be moisture, if the water is not removed, the floor will corrode from the inside to the outside, causing great trouble. If you live on a low floor and may get water during the rainy season, it is recommended that you do not install flooring and use ordinary tiles to have a good waterproof effect.

1. Hollow drum in the corner: If the floor tile is only hollow in the corner, the grouting hollow drum treatment method can be adopted. 2. Local hollow drum:

If the floor tile is a local hollow drum that will not affect the installation or use of household appliances, it cannot be processed; However, if it affects the installation of furniture and household appliances, it is necessary to knock off the hollow floor tiles and re-pave them with new ones. 3. Large-area hollow drum: If the floor tiles have a large area of hollow drums, it is best to do the floor tile base again, and then lay the tiles.

4. Floor tiles fall off: If the floor tiles fall off with socks, it is necessary to remove the cement mortar layer with a shovel and other tools, and then use cement mortar to pave carefully after disturbing the tiles, but note that if the floor tiles are only partially falling off, you can not be forced to hit the mortar on the surface of the foundation, and the impact is loose in the initial strong tile.

First, the ground brick hollow drum treatment method:

1. If the situation of the hollow drum is not very serious, only the corners are slightly warped, then we can use tools to pry up along the gaps in the corners, and then pour the prepared cement slurry into the gaps, and then press it tightly with a pressure plate, and wait for the cement slurry to solidify.

2. If the hollowing situation is very serious, then it is best for us to remove the problematic floor tiles, clean up the mud on the back, and then re-apply the cement slurry and lay it on the ground.

Second, the method of choosing floor tiles:

1. You can choose the right floor tiles according to the style of your home, if the decoration style is more plain and concise, then we can choose white marble tiles, which are unified with the style; If the style is more ornate, we can lay more colorful and textured floor tiles in the home.

2. The selected floor tiles should have good anti-slip performance, because the surface of most floor tiles is very smooth, and sometimes it is easy to fall, which is very dangerous, especially in families with the elderly, children and pregnant women.

3. The floor tiles should also have good water resistance, because we often mop and wash the ground, if the floor tiles are easy to absorb water, then expansion and deformation will occur.

4. We should also pay attention to the quality of floor tiles, and do not buy unqualified three-no products for small cheapness, so that the problem of breaking often occurs when used in the future. Therefore, when buying floor tiles at the beginning, it is necessary to choose those brands of floor tiles that are more famous, so as to have quality assurance.

The easiest way to fix a hollow floor is as follows:

1.Find out the hollow drum area:

Identify areas of hollow floor and tap lightly on the floor with a rubber pin to determine where hollowing is occurring.

2.Crack filling Bright Kai:

Use a knife to open the crack and squeeze in some sewing agent or glue, then gently press it.

3.Compaction:

Use a heavy object such as nails, tenons, or bricks to press against the repair position to ensure that the repair position is flat and free of waves.

4.Dry:

After waiting for the repaired floor surface to dry, use soft sandpaper to gently sand the surface so that it is flush with the surrounding floor surface.

It is important to note that when repairing floor hollows, it is necessary to use appropriate glue and tools, and ensure that the repair site is dry in time. In addition, different types of flooring materials such as SVP flooring, solid wood flooring, and laminate flooring require different repair methods and repair materials, which should be selected according to the situation with hidden objects. Finally, regularly inspect the floor for hollowing and carry out necessary maintenance and repairs.

In newly renovated houses, hollow floors are often one of the biggest headaches for many homeowners. And this problem, once it appears, will seriously affect the aesthetics and comfort of the whole home. For a long time, owners have always solved this problem by resurfacing the floor, which is not only time-consuming and laborious, but also adds additional expenses.

In fact, the repair of the ground hollow drum is not as difficult as everyone thinks, and I will introduce the easiest repair method below.

First, remove dust and debris from the surface. In this step, you need to choose the right tool, such as a shovel or broom. After cleaning, the entire floor needs to be cleaned with detergent mixed with water to ensure that it is clean and dust-free.

Secondly, if there are hollow drums on the floor, you need to smooth them with a hammer. However, be careful not to hit too hard, as this can cause damage to the ground, leading to more serious problems. While carefully knocking on the ground, it is necessary to observe whether there are cracks in the ground.

If there is a crack, it needs to be repaired with a silicon sealing material.

Then, the floor paint needs to be applied. The paint needs to be selected to match the color and quality of the floor, and it needs to be applied with a brush or roller. After painting, you need to wait for the paint to dry completely before using the floor again.

Finally, you need to pay attention to daily maintenance. Floor maintenance requires frequent cleaning and wiping to keep it clean and dust-free. Avoid prolonged flooding and serious bumps to prevent the ground from hollowing again.

To sum up, the easiest way to repair floor hollows is to clean the surface, level the hollows, repair cracks, apply floor paint, and maintain them regularly. Through these steps to solve the problem of ground hollowing, the burden of the owner can be reduced to a certain extent, and the whole home is more beautiful and comfortable.

There are many ways to repair floor hollows, but here are the easiest ones:1Prepare tools and materials:

Carpentry glue, needles, rubber hammers, wood chips. 2.Find the location of the hollow drum:

Tap the floor with an oak hammer to listen to the sound and find the location of the empty drum. 3.Inject glue:

Use a needle to drill a few small holes in the hollow drum and inject woodworking glue into the holes until the glue penetrates under the floor. 4.Compacted floors:

Gently tap the floor with a rubber mace to evenly distribute the glue, then press a heavy object (such as a book) against the floor and wait for the glue to dry. 5.Supplemental woodchips:

If there is an obvious depression in the hollow drum, you can fill it with wood chips, apply glue to the wood chips, put them into the depressions, compact them with a weight, and wait for the glue to dry. 6.Polishing the floor is open

After waiting for the glue to dry, sandpaper the floor so that the patch is flush with the surface of the surrounding sail board. The above is the easiest way to repair the floor hollow, but if the floor hollow is more severe or the area is large, it is recommended to ask a professional to repair it.