After the computer is restored with one key, it has been restarted after the system is selected, and

Friends, you can try,1. Press "F8" when you boot up, press Enter, Enter, enter "Safe Mode", find: "Last correct setting", press down, try!

2。Or, find the "Normal Boot" mode in "Safe Mode", press it, and try it!

3。If it still doesn't work next time you turn it on, I suggest you do it "again": "One-click restore"!

See this is the "Restore System" method, which will not only help you repair and restore your computer, but will also save all the files on the disk

After the computer is turned on, (it can only be operated after the computer "brand")!

Press the "One-Key Ambulance" shortcut on the far right of the keyboard (the "+" sign on the keypad).

Laptop press: F2 or F11), and then wait and press "Deep One-click Restore" or "One-click Ghost", wait for the system to "rescue and copy" all disk files, note: Restore is good, do not shut down or restart the computer, should immediately "enter the main platform", that is.

desktop", otherwise "all the work is wasted", "the restoration is invalid"!

The computer is immediately back to the "factory state"!

Factory state": It is the state when I first bought it, the software is there, there is no need to "reinstall the system", and it is much more "worry-free" than the heavy installation!

Or, take out the "manual" when you bought the computer and compare it with "restore the system"!

When the interface appears normally, there will be 4 options: Normal Startup, BIOS Setup, Bootmenu, and System Recovery. This prompt indicates that your one-click restore program does not exist, and if the system on your computer is damaged, you will need to reinstall the system.

If the system can be used on the computer, then select the boot menu and select the hard disk to boot the computer.

Under normal circumstances, there will be a blue-gray interface for one-click restoration of the electrode, and there is a percentage bar, there are some restored parameters and data below, there should be some small errors in the above interface, you can try to restore again, if you can't enter the system, you can use the method of U disk system.

There should be a PE option in the disc options, go in, and then open the disc inside, and find one. gho.

Open it with the one-click restore software in the disc. The gho file can be installed.

In this case, there will also be a situation where the disc cannot be started, so you need to set the disc as the first boot, the specific method is: Press and hold the del key to enter the boot, because the motherboard is different, the settings are different, you can find the setting place inside.

F10 to save, and then boot it up to enter the disc to boot.

Method steps.

1.When encountering this kind of problem, we first look at whether the other party has entered the wrong account, such as whether she has entered the guest account. We start by clicking on the Start Menu - Sign Out.

2.After the dialog box pops up, we can select "Switch User", where we can choose to log in to your previous account, and we can find out if you have entered the wrong account. Usually we have an administrator account.

3.Another method may be that you have done a restore on your computer, and you have done a one-click restore on your boot. Or maybe you made a mistake restoring your settings. At this point, we can right-click on my computer and select properties.

4.In the dialog box that pops up, select Advanced.

5.In "Startup and Failback", click "Settings".

6.Select XP in the default operating system, and remove the checkmark before displaying the operating system time and restoring the system time. Click OK to save, restart and look again, and the problem will be solved.

7.There is also a possibility that your system settings have been changed somehow. We can do this by following the steps below.

Let's click on the start menu, click on "Run".

8.Enter it in Runtime". Point OK.

9.Under User Configuration, select Administrative Templates.

10.Double-click on the right to open the Desktop.

11.Find "Don't save settings when exiting" and double-click to open it.

12.A dialog box pops up, and we select the "Disabled" point applied. Rebooting will do it.

13.If the above methods do not work, it is estimated that the computer poisoning is already very serious, and the files have been changed a lot. Upgrade the antivirus software to the latest level, restart it, and press F8 to enter safe mode to prevent antivirus. If you look at it again, you can only reinstall the system.

When a new account is created in the XP system, the original super administrator A account will be hidden by default.

First log in with the new user, open the control panel Performance & Maintenance Management Tools Computer Management Double-click Computer Management, double-click "Local Users and Groups" and click "Users", disable or delete the "A" account on the right (that is, the newly created user) (there will be a warning message when deleting the current account, click "Yes" to do it) There should be a red cross in front of the disabled account. In this way, you can log in with the "administrator" account (or right-click on My Computer and select Manage Local Users and Groups, double-click on the user, right-click the user you want to delete, and then select Delete).

Restart the computer, when you start to the system login interface, press and hold the Ctrl+Alt key at the same time, and then click the del key twice, a new login interface will appear, enter "administrator" at the user name, enter the password and enter no password is empty, press enter to log in (this method can also be tried).

If you are XP and create a new account, the original one will be hidden, the meaning of your question, I guess, if not, please ask me.

1.Point to "My Computer" and right-click "Properties".

2.In the System Properties window, click Advanced

3.In the Advanced Properties window, click Settings under the Startup and Failback item

4.Select "Microsoft Windows XP Professional" and "OK".

5.The next time you boot up, you will directly enter the windosw interface.

Please check whether there is a one-key restore switch on the chassis, when you inadvertently press or pull it to the ON state, the restore program will naturally run when you boot up. I know that Lenovo has this switch on its machine.

Right-click on My Computer, select the settings for startup and failback in the advanced bar in the properties, and select Normal System in the default operating system.

When the computer is turned on, the default is not the Windows system, and it is a one-click restore, and the solution is as follows.

1) Right-click on the desktop "My Computer" or "Computer" -> Properties -> Advanced.

2) Find"Boot and failback"For this item, click "Settings".

3) In the new window, select "System Boot".

4) In the drop-down box of the default operating system, select Windows.

5) Then press "OK" to save the exit, and it will automatically enter from the Windows system in the future.

Right-click on my computer properties Advanced options Startup at the top of the list, just choose it.

A bunch of fools, if you can't get into the system, how do you enter the system to modify the file when you choose one-click restore?