Why is it slow to boot up after one click restore of the computer, and how can I speed up the boot s

When we use the computer for study and work, we always hope that the computer will be fast enough to boot up and run smoothly enough after booting, so that our work and study efficiency can be greatly improved. ......Therefore, taking steps to optimize our computer to keep it in better working condition is something we must pay attention to when we use our computer on a daily basis.

Specifically, there are several ways to optimize your PC to make it run faster:

1. Make sure that the heat dissipation of the computer hardware is in good condition, which can make the computer run more smoothly.

Computer hardware emits heat as it works, so measures need to be taken to dissipate heat.

At present, the vast majority of computers use air-cooled radiators ......This kind of heatsink is easy to accumulate dust during work, which affects the heat dissipation efficiency, causes hardware overheating, and frequency reduction protection, thereby affecting the smooth operation of the computer.

For this problem, we need to regularly clean the dust inside the host computer to keep the hardware in a good state of heat dissipation, so as to ensure that the computer runs smoothly.

2. Regularly optimize the computer system to make the computer run faster.

After the computer system runs for a long time, the reading and writing efficiency will be reduced due to too many file fragments, resulting in changes in the operation of the system.

For this kind of problem, we need to regularly optimize the computer system, clean up file fragments, and optimize the reading and writing efficiency, so as to ensure the smooth operation of the computer, so that the computer can be very fast both in terms of boot speed and software running speed.

3. Clean up the software that is not commonly used, which can make the computer boot faster.

The computer needs to be loaded with various software when it is turned on. This process takes up a lot of system resources and slows down your computer. ......To solve this problem, we need to clean up the software that we don't use frequently, which can free up more system resources and make the computer run faster after booting.

4. Solid state drives and large memory can make computers run faster.

From the perspective of the computer itself, under the premise that the core components such as the CPU remain unchanged, in order to make the computer run faster, the effect of configuring solid state drives and large-capacity memory is very obvious......These two types of accessories will greatly improve the efficiency of reading and writing data on the computer, making the computer run faster and smoother after booting up.

The above types of factors are the specific reasons that affect the running state of the computer after it is turned on, and the specific methods of how to make the computer run faster. ......We can take targeted measures to optimize the specific state of the computer we are using, so that we can run the computer smoothly and allow us to study and work more efficiently.

Computer card, slow running, it is likely that there is too much computer garbage, insufficient running memory, or it may be that the computer hardware temperature is too high, or the hardware configuration is too low, or even poisoned, solution: one. There are too many programs open and take up a lot of resources:

1.Click on the 360 Accelerator Ball to speed up and close the program that is taking up too many resources2Use 360 Security Guard to optimize the system and clean up garbage.

Running memory is less than 1If the running memory is insufficient, the virtual memory setting is larger2If the memory is insufficient, you can install a memory module.

3. The high temperature of the computer hardware caused by the high temperature will also cause the computer to get stuck, delayed, crashed, blue screen, automatic shutdown, or automatic restart. You can use a temperature measurement tool to detect computer hardware: the more commonly used tools are:

Master Lu, if you find that the temperature of a piece of hardware is too high, please clean up the dust first, or deal with it according to the actual situation, if you can't deal with it, you can take it to the computer city to deal with it.

Fourth, computer poisoning, computer poisoning, and the destruction of system files can also lead to problems such as slow operation and even crashes. 1.Use 360 Security Guard to kill Trojan 2Fix 3 with 360 Security GuardAntivirus with 360 4First aid with a 360 system first aid kit system.

5. Reinstall or restore the system.

6. If your computer configuration is too low, please upgrade your computer's hardware.

Analysis: There are many reasons for computer card and slowness, such as too many self-starting programs at startup, security software background detection or database upgrade, virus infection, too many hard disk fragments, insufficient running memory, etc.

Processing: If you can rule out a good stool that has not changed the computer hardware before and after one-click restore, you can start to solve it from three aspects:

1. Hardware:

1) Increase physical memory: If the motherboard has extra memory slots, you can add memory that matches the original memory model specifications.

2. Software:

1) Increase the running memory. You can use 360 Guardian or software with similar functions to regularly clean up and optimize the acceleration of your computer to remove unnecessary boot programs and various plug-ins.

2) Use security software such as 360 Security Guard, and combine with 360 Antivirus to regularly check and kill Trojan viruses. At the same time, remember that you cannot install multiple security software on the same computer, such as installing 360 Security Guard, Guard, PC Manager, etc., to prevent security software from affecting each other.

3. Operation habits: develop good computer operation habits, do not run multiple large software at the same time, close unnecessary programs and windows in time, clean up memory in time, reinstall the system every six months, etc.

Analysis: The system slows down after the computer one-click Wu calendar restore, which is generally a system conflict problem after recovery, 1. One-click sail orange such as the one installed before the restoration, including the uninstalled, as well as the deleted and newly added things are recorded in the registry, so that is to say, now one-click recovery, many things in the registry are not recorded or the original links of the computer are invalid, so the current response speed is slow.

2. Furthermore, there are a lot of computer processes, which refers to the process of starting the computer without doing anything after booting, and the solution:

2. Clean up the garbage on time and have regular physical examinations.

1. All of them think it is caused by the problem of many boot items. The solution, of course, is to optimize it with 360 boot.

You said that the boot to the desktop is very fast, and the broadband connection is not available, I think, because when you boot up and enter the desktop, because there are more boot starts, and those startup items have to start the time, so the broadband connection cannot be reached. For example, if you want to open a relatively large program, but you open another program, because you need to read some data from the program, the second program will obviously take more time to open than when you did not open the first program. Your broadband connection is like a second program,And those startup items that boot are like the first program,When there are more startup items at boot,The memory can't transfer so much data to the CPU for processing,Of course, it's even more impossible to deal with the task of your broadband connection,When you boot the program has been all opened,At this time, QQ Butler will display the boot time (why will the time be displayed when the boot startup items are all started?,It may be the priority problem set by the program),At this time, there is no program,Connecting broadband is naturally no problem。

This is because your auto-IP allocation is slow. You can set the static IP manually.

When you had a slow system backup before, it was the same as before the backup.

After installing the backup or running for a while and then backing up, it is not necessarily fast to turn on and shut down, or through manual settings and modifications is an effective way to improve the speed of booting and soffing.

1. Use the boot acceleration function in the 360 security guard to clean it up first.

2. My Computer Properties - Demolition - Advanced - Boot and Failure Recovery - System Boot - "Time to display the list of operating systems" is changed to 0 or 1 - Turn off "Time to display recovery options when needed".

3. My Computer - Device Manager - "IDE ATA ATAPI Controller" - Secondary IDE Channel - Properties - Advanced Settings - If the device type can be selected, select None - the transfer mode is changed to "DMA (if available)"; Some minor and major IDE channels are set this time as follows.

4. Open the registry (start-run-regedit), click "My Computer" to open "Find" in the "" menu, enter AutoendTasks, and click "Find Next". Double-click to open the found result, and modify the "Numerical Data" to 1. Then under AutoEndTasks you can find hungapptimeout, waittokillapptimeout, set the "numerical data" to 2000 or less, here by the way, also modify the time of the menu delay, find the menushowdelay below autoendtasks, the value is in milliseconds, if you want to remove the menu delay, set it to 0.