How to unload a dump truck safely? How to load and unload goods reasonably?

Unloading operation steps: (1), lift the cargo compartment, dump the load (the engine is running normally, the air pressure is on the left and right, and the circuit is fault-free). 1. Stop the vehicle, pull on the handbrake, (open the locking mechanism first if there is a manual locking mechanism for the rear door) step on the clutch pedal and wait for about 5 seconds.

2. Turn the neutral switch (on the vertical plane of the dashboard in front of the steering column) to the horizontal position. 3. Press the power take-off rocker switch on the dashboard (note: open the switch lock first and then press down).

4. Hang the transmission in low gear forward gear (first or second gear), and pay attention to control the engine speed at 1000 1500 rpm during the lifting process. 5. Gently lift the handle of the control valve to move it out of the limit groove to the "liter" position6. Step on the accelerator pedal and slowly release the clutch pedal.

The cargo compartment can be raised. When the cargo compartment is raised to the highest position, it automatically stops. Then place the operating valve handle in the "middle stop" position.

2), stop in the middle of lifting, in the way of lifting want to stop lifting the cargo compartment does not move, you can step on the clutch pedal or move the control valve handle to the "stop" position, the cargo compartment can stop moving. (3), drop off the cargo compartment and get off the walking car. 1. When the cargo compartment has been lifted, the engine is still running, the power take-off is in a state of engagement, the transmission is hung with a low-speed forward gear, and the control valve handle is in the "middle stop" position, the clutch pedal is stepped down, the rocker switch and the neutral switch are reset, and then the control valve handle is moved to the "down" position, and the cargo compartment can be landed.

If the valve handle is moved to the "middle stop" position during landing, the cargo compartment can be stopped during landing. When the cargo compartment falls into place, move the control valve handle back to the "middle stop" position, lift the clutch pedal, and the car can get up and walk. 2. When the engine is not running and the air pressure is left and right, the control valve handle is placed in the "down" position, and the cargo compartment can also be lowered, and the control valve handle is moved to the "middle stop" position, and the cargo compartment will stop moving.

Before starting the engine to drive, please make sure that the control valve handle is in the "middle stop" position, the rocker switch is in the lower cocked position, and the neutral switch is in the vertical position, then you can step on the clutch pedal and start the walker.

When lifting the container, be sure to be in a flat place, and do not be overweight.

Consider various safety factors to ensure the safety of goods, personnel and equipment.

Not all cargo can be automatically unloaded.

Briefly describe the rationalization measures for loading and unloading operations as follows:

1.the principle of labor-saving;

2.Eliminate ineffective handling;

3.Improve handling flexibility;

4.rational use of machinery;

5.the principle of continuity;

6.Maintain a balanced and smooth logistics;

7.the principle of container unitization;

8.the principle of personification;

9.To improve the comprehensive effect, the rationalization of loading and unloading handling in logistics is mainly to the selection and reasonable configuration and use of loading and unloading handling methods, loading and unloading machinery and equipment, as well as the rationalization of loading and unloading handling, and the rationalization of loading and unloading handling, so as to reduce the number of loading and unloading handling, so as to save logistics costs and obtain better economic benefits.

<>1. After starting, the dumping hydraulics and mechanisms should be tested.

2. When cooperating with the excavator to load, after the dump truck is in place, tighten the hand brake. If the bucket must exceed the roof of the cab, no one shall be in the cab.

3. When unloading, the terrain should be selected, and whether there are wires, obstacles and pedestrians in the sky and around it. After unloading, the body should be restored in time, and it should not be dropped while walking.

4. When unloading to the pothole, it is necessary to keep an appropriate distance from the edge of the pit to prevent the slope from collapsing and ensure safety.

5. When overhauling the dumping device, the carriage should be firmly supported to prevent the carriage from falling suddenly and injuring people.

6. It is strictly forbidden to carry people in the compartment of the dump truck.

How does it work? Didn't you learn to drive in driving school?

The method of unloading is different, please refer to the manual of the car for details.