What should I do if my mobile phone is out of power and there is no charger on the high speed rail

If our phone is out of battery and we don't have a charger when we ride the high-speed train, we can try the following:

1.Directly find the service desk on the high-speed rail, where you can buy a power bank or borrow a power bank directly.

2.If there is no power in the car, you can also directly ask the flight attendant to help charge it.

3.If you have a data cable, you can also use your computer to temporarily charge your phone.

4.If there are other people's phones around that support wireless reverse charging, you can charge two phones close to each other.

5.If you are on a bus or high-speed rail, you can observe whether there are people who carry a power bank and ask them to lend it to you.

6.If you have a mobile phone cable and a laptop, you can use the computer to temporarily charge your phone.

7.If you are in a public place such as a station or airport, you can find a smart charging pile or a device that shares a power bank for charging.

In short, in the case of running out of power and no charger on the phone, we can first stay calm and then choose the appropriate method to solve it according to our own situation.

There is a socket under the seat on the high-speed rail, you can use it as long as you have a charger, you can also ask the waiter who pushes the trolley if there is a charger for sale, or ask you to borrow one next to you, but you must say good things, you can't let others think that you are a bad person, most of them are fast charging now, and half an hour of shutdown and charging is enough for you to use for a long time.

Check to see if there is a charger in the next seat, ask others and borrow it from other passengers with charging equipment!

There is a place for charging.

There are many types of bullet trains in the country, the standards are different, and the positions of different plugs in the carriages are also different. It just may be in a different location, or not in every car. The charging head is generally in two positions, one is under the seat back in front, close to the place where the foot is stepped, and this charging socket is easy to find.

The charging socket of some trains is located under your seat, under the seat board, and you have to look down to find this plug. The charging plugs are all supported by the national standard three ports and two ports, and if it is the American standard, you must prepare your own charging conversion equipment.

Basic characteristics of high-speed rail

1. The high-speed railway is very smooth to ensure the safety and comfort of driving, the high-speed railway is seamless rail, and the high-speed railway with a speed of more than 300 kilometers per hour adopts a ballastless track, that is, there is no stone in the integral track bed to ensure smoothness.

2. The high-speed railway has few curves, a large curve radius, and the turnouts are all movable high-speed turnouts. Extensive use of viaducts and tunnels. to ensure smoothness and shorten distances.

3. The catenary of the high-speed railway, that is, the suspension of the wires on the top of the train, is also different from that of the ordinary railway, so as to ensure the contact stability and durability of the high-speed EMU.

4. The signal control system of high-speed railway is more advanced than that of ordinary railway, because of the high density, fast speed and high safety.

If there is no charging place on the high-speed rail, you can ask the flight attendant, and the charging place is generally in front of the armrest of the first-class seat of the high-speed rail or under the seat, while the second-class seat is generally under the seat. If you really can't find a place to charge, you can boldly ask the flight attendant.

There is generally a charger on the seat of the high-speed rail, which is located under the seat or in the armrest of the seat, and the socket row can be seen by opening the cover of the socket.

On the high-speed rail, there are not only charging sockets on the seats, but also in some public areas, and there are sockets in the storage place and toilet for large luggage.

Charging on high-speed rail must pay attention to safety issues slowly, and do not use high-power electrical appliances to charge, so as not to cause a short circuit in the plug or cause safety accidents.

There may be several reasons why some high-speed trains do not have charging places:

1.Early design: Some older models may not have a charging port setup, such as the CRH2 model, which cannot be charged. These models may only have sockets at the washbasin and at the front and rear of the cabin.

2.New model design: The latest Fuxing and Harmony EMUs have charging sockets at the bottom of each seat, and even have Wi-Fi signals.

3.Seat design: Some high-speed rail seats may not be designed with charging services in mind for passengers, and these seats are usually regular seats and standing tickets, which may not be designed with the need for charging services in mind because of their lower cost.

4.Limit on the number of outlets: Some high-speed rail seats are designed to provide charging services for passengers, but due to the limited number of charging outlets, they can easily be occupied by other passengers before they are used, resulting in other passengers not being able to use the charging sockets.

In general, whether high-speed rail has charging facilities or not depends on factors such as how old and new the vehicle type is, how the seats are designed, and the number of sockets is limited. With the advancement of technology and the increase in people's demand for charging, more new models of high-speed rail are expected to add charging facilities in the future. It is recommended that you choose the appropriate charging method according to your specific vehicle model and actual needs.

The socket on the high-speed rail cannot charge the mobile phone The solution is as follows:

1.Check that the plug is clean and that the conductive part is not damaged, and if there is no problem, try to replug it in a few times or test it with a different power cord.

2.Replace it with another outlet or use a power bank for charging.

3.There is a problem with the socket itself, which is reported to the train staff.

Sockets are also known as power sockets and switch sockets. It refers to a socket that can be inserted into one or more circuits, through which various connectors can be inserted.

1.There are many types of bullet trains in the country, the standards are different, and the positions of different plugs in the carriages are also different.

2.Some are only available at both ends of the carriage, some are under the seat, and some are under the front seat.

3.If you find that your seat does not have a power plug, you can find a plug to charge it at the bulky baggage desk and at the handwashing station.

4.For example, there are charging sockets on the walls in front of the first row of seats and behind the third row of seats in each train.

5.High-speed rail, abbreviated as high-speed rail, refers to a railway system with high design standards and safe high-speed travel for trains, and the world's first high-speed railway Noshizao Road system is the Tokaido Shinkansen in Japan, which was completed and opened to traffic in 1964.

6.High-speed railways generally use ballastless tracks in China, which are electric EMU trains with operating construction speeds of 250km h and above, and the vehicles are divided into CRH and CR series models.