Most houses with sloping roofs are on the top floor, so how should they be used?

Due to the relatively low floor height of the top floor space, in order to avoid a sense of depression and limitations, the color matching of the top floor attic should be based on light colors, and it is not suitable to use too dark colors, and simple and lively colors can make the space bright, such as white and bright yellow. Architectural features such as spires, slopes, and irregularities should be used to reflect more spatial creativity. This makes the space in the attic bright, even when the light is not very good.

Loft-style design is best suited to shrink fashion, not for a mix of heavy colors. <>

Also pay attention to warmth, with soft fabric sofas and warm carpets. Because the attic is relatively independent, the style of the attic will be very different from the style of the whole room, such as Chinese + modern, the ancient attic lighting is not good, if the house is not high enough, the attic will appear cramped and depressed up and down. In order to make up for this shortcoming, it can be treated with glass, which is the most common method in the design of sloping attics, and it is also a method that is worth learning from.

Dianchi Lake + Pastoral, walking into such an attic, you can make people feel another world. <>

There are many ways to deal with the loft pitched roof according to the style you like. You can use the attic sloping roof as another space, so as to make full use of the space of the attic sloping roof, which can be decorated into a study, reception room, entertainment room, etc., try not to transform the bedroom and living room, otherwise it will feel too small and very depressing. The ceiling can also be attached to the sloping roof of the attic to make the response flat, so that the decorative effect of the building is more beautiful.

You can also do some simple decoration according to the moving line of the inclined roof, and the decorative effect of the terrace to the roof can be, according to different styles, the shape is also different. <>

The above is a detailed interpretation of the problem, I hope it will help you, if you have any questions, you can leave me a message in the comment area, you can comment with me, if there is something wrong, you can also interact with me more, if you like the author, you can also follow me, your like is the biggest help to me, thank you.

The collocation is mainly in light colors.

Yes, the effect of not hanging the ceiling is also very good, this can be done according to your preferences and choices.

It should not be, if there is no ceiling, there is a great safety hazard, so such a house must do a good job of ceiling.

Yes, it doesn't matter if you don't have a suspended ceiling, and it's normal for everyone to have their own decoration habits.

Summary. How to find a slope on a flat roof:

A square or rectangular cylinder, with an oblique section, can form a slope of the drainage slope. If you find the slope according to the diagonal, set the lowest at the rainwater inlet, the highest diagonal point, pull the straight line at the two points, and set its slope, find the height difference between the two points, and use the proportional method to find the height of the other two points, see Figure 2. If it is a square, the other two points are the same height and are half the height difference between the high and low points.

How to level the roof slope of a building.

The method of finding the slope of the flat roof: a square or rectangular column is intercepted to an oblique section, that is, the width of the group can form a drainage slope of an inclined plane. If you find the slope according to the diagonal, set the lowest at the rainwater inlet, the highest diagonal point, pull the straight line at the two points, and set its slope, find the height difference between the two points, and use the proportional method to find the height of the other two points, see Figure 2.

If it is a square, the other two points are the same height and are half the height difference between the high and low points.

I'm asking if the slope is changed to a flat surface.

You're doing it the other way around. This can't be reformed privately.

Look for a professional.

How do you do a roof with a slope on all sides? What should I pay attention to when waterproofing a villa? As a newbie to home improvement, you may not know much about this. But don't worry, I'll reveal the answers to these questions one by one.

It is mainly divided into these four steps: the first is the roof formwork and panel reinforcement binding; The second is roof panel concrete pouring, curing, leveling, base surface cleaning, elastic line and sandwich paneling; The third is the construction of leveling, paving waterproof membranes, construction leveling, elastic wires, buried copper wires and hanging tiles; The fourth is to pave tiles, ridge tiles, head tiles slurry, paint cement paint and finishing.

How to do waterproofing the roof of the villa.

1. When carrying out the waterproof construction of the roof, you should pay more attention to the weather conditions of the day, and choose sunny days for construction as much as possible. Of course, you also have to fortify according to the characteristics of the roof, the thickness of the insulation, the design of the drawings and the requirements of the roof waterproofing.

2. Of course, before the roof waterproofing project, it is necessary to carry out the necessary "three inspections", and after the inspection, the corresponding records must be made. For example, when the roof is waterproofed, it is necessary to find a professional construction personnel to carry it out, and to choose high-quality waterproof and thermal insulation materials, otherwise it will be troublesome when problems occur in the later stage.

3. After the material is bought, do not rush to construction, but should carry out corresponding inspection of this material to ensure that the material can be used for roof waterproof construction normally. Of course, after the waterproofing construction is completed, it is also necessary to carry out a water storage test, and do not place heavy objects or holes in the roof.

Precautions for villa waterproofing.

When carrying out roof construction, it is necessary to ensure that the climate exceeds 5 degrees Celsius and the weather is sunny, so as to ensure the normal film formation of the waterproof coating and the quality of the roof waterproof layer.

Summary: After reading the above introduction, I believe you have a further understanding of how to make a roof with slopes on all sides. If you want to know more about relevant information, please continue to **** network file Li station, and more exciting content will be presented to you in the future.

The pitched roof house has both its advantages and its disadvantages:

1. Pros:

1.Styling beauty.

2.No water accumulation, good waterproof performance. (Some of the old houses are specially flattened slopes), especially the tile slope roof.

3.Make use of the sloping roof space to make another floor, which does not occupy the sunlight spacing (attic floor, and can use the part below the meter).

4.Energy-saving: Heat is gathered at the top in summer.

In winter, it doesn't feel cold indoors. The heat is running upwards. The top of the slope can concentrate hot gas at the intersection of the two slopes.

No matter how high the flat top is, it will be very hot. The wind also runs upwards because it converges through the windows at the lower levels to the windows at the top of the slopes.

2. Disadvantages:

1.The self-weight of the roof is large, and the cost is high.

2.The roof surface is not available.

3.Note: Generally speaking, the slope of the sloping roof should be less than 30 degrees, otherwise the weight is too large, and the roof as a whole is too large (mainly refers to the low floor. high-level to be examined). Moreover, in construction, it is better not to express the slope in degrees, but in proportions.

4.It is inconvenient to repair.

Considering the housing prices in Dalian and the usable area of more than 80 square meters, and the sloping roof house, I think 490,000 yuan is acceptable.

1.Compared with the flat roof room, the decoration of the pitched roof should be more brainy, especially in the choice of furniture, on the side of the pitched roof, in order to make full use of the space under the pitched roof, you can make the furniture side according to your own needs to coincide with the sloped roof, there is a special interest, from which you can also experience the joy of designing your own furniture.

2.The space under the window should not be wasted, because the distance from the bottom of the window to the ground is generally short, and this space can be used for storage. A movable cabinet on wheels and some low-style furniture can be installed under the window. Not only practical, but also to cover the heating under the window.

3.If the original window area of the attic is small, it can lead to poor light and ventilation. You may consider retrofitting windows or adding pitched roof windows, but you must get the approval of the property to enlarge or modify them under the guidance of the relevant professionals.

At present, the pitched roof windows on the market are specially used in the attic, not only with good drainage equipment, but also effectively prevent water leakage, so that you can live in the attic without worry.

4.The top of the inner side wall of the window opening is perpendicular to the floor floor, which increases the amount of light from the sloping window. The lower end of the 45-degree angle inclined window is meters from the ground, and the upper end is meters from the ground. For less than 45 degrees, it is recommended to choose a window with a length of 1420cm, which can make up for the lack of angle.

The key is to look at the style, you can do herringbone decoration, and the top light falls down in the middle, that is, it arrives after it is done"v"Font, above the cedar board brush white paint shading, a bit with pastoral style (modern), with gypsum board as the main decorative glass, can add line decoration (glass different, the style of the line can be matched with European, modern, Chinese and other different effects) can also take the middle of the inclined top to make a fuss, you can do a small piece of flat modeling, you can use a few wooden grilles to hang (small area, preferably white) chandelier can also be on the original top of the horizontal different wallpaper to decorate.

There are several ways to do this:

1) Flat roof.

Flat roof is easy to coordinate and unify the relationship between building and structure, which is more economical and reasonable, so it is a widely used roof form. A flat roof is both a load-bearing member and an envelope. In order to meet the multi-faceted functional requirements, the roof structure is characterized by a multi-layered approach with a variety of materials stacked.

Flat roofs should also have a certain drainage slope, and generally the roofs with a slope of 2% to 5% are called flat roofs.

2) Sloping roof.

Sloping roof is a traditional roof form in China, which is widely used in residential buildings and other buildings. Some modern public buildings also often use pitched roofs to consider the requirements of landscape environment or architectural style. Common forms of pitched roofs are:

Single-slope and double-slope roofs, hard mountain and hanging mountain roofs, four-slope rest mountain and Pangdian roofs, round or polygonal spire roofs, etc. The roof waterproofing material of the sloping roof is mostly tile, and the slope can generally be 10% 100% 10% 20% is mostly used for metal sheet roofing, and more than 20% is mostly used for flat tile and linoleum tile roofing.

3) Other forms of roofing.

Civil buildings sometimes also use other special shapes such as curved or folded roofs, such as arched roofs, folded roofs, thin shell roofs, quilted roofs, suspension roofs, grid roofs, etc.

Waterproofing requirements for roofs:

1) As an envelope structure, the most basic function of the roof is to prevent leakage, so the main task of roof structure design is to solve the problem of waterproofing. Generally, the purpose of waterproofing is achieved by using impermeable roofing materials and reasonable structural treatment, and appropriate drainage measures need to be taken according to the situation at the same time, and the water on the roof is quickly drained away, so as to reduce the possibility of leakage. Therefore, the general roof needs to do a certain drainage slope.

2) the waterproofing of roof is a comprehensive technology, which involves the form of building and structure, waterproof material, roof slope, roof structure treatment and other issues, need to be considered comprehensively. The design should be followed"Rational fortification, combination of prevention and discharge, adapting measures to local conditions, and comprehensive management"principles.

Ask me.