The washing machine is cold every time I enter the hot water this time, is the water heater broken?

Like a washing machine, every time it is cold and gasy, if the hot water is hot, it should not be that the water heater is broken, because you are a wiring problem, it may be a problem with the water valve opening, you have to adjust the corresponding water valve with him. To give cold water close, it is better to take a washing machine line alone.

Hot water in the washing machine does not mean that the water heater is broken. It may be the cause of the washing settings, and the hot water may be added if the setting is wrong.

It is possible that the solenoid valve of your voltage water heater is broken, and the Zhaocheng water heater is always open, so the hot water is in the washing machine. Not a water heater, broken itself.

The washing machine is cold water every time, and hot water is in 24 hours, so it may be that the water heater is broken, so you'd better unplug the water heater and check it.

It's cold Xiaojing every time, and I don't think it's that the water heater is broken when you get hot water this time, it must be the surrounding pipe input, and you can open it to see some problems.

Under normal circumstances, washing machines are meant to be filled with cold water, not hot water. Because the washing machine is connected to the tap water, not the water in the water heater. So it's not sure if the water heater is broken, it's possible that the washing machine is malfunctioning.

It should be that there is a problem with your water pipe, you can check if it is the hot water pipe or the cold water pipe outlet pipe.

The washing machine is cold water every time, and it is possible that the water heater will not break down this time, and it is possible that you did not complete it, so he will urge this kind of problem, so it should need some repairs.

The washing machine is cold and quiet every time, is the water heater broken this time? It's not that the water heater is broken, it's that it's hot now, and the water in the water heater has been hot for a long time.

It's definitely not that the water heater is broken, there is no problem if you can get water, and if there is no cold water, it may be that the water heater has no cold water.

The washing machine is Ren Xiaojing every time, is the water heater broken this time? No, it seems that there is a problem with the adjustment of your setup shop this time, so let's reset it!

You can check the water heater switch and a kind of valve of the cold water purifier to see if they have a series function. After the inspection, make a decision to determine whether the water heater is broken or not.

That means that the water heater is broken, and it is best to find someone to fix it, safety is the most important.

The washing machine is cold water every time, it may be that there is a problem in the washing machine, not that the water heater is broken.

This may be the result of your valve being screwed upside down, this is the reason. It is not good to wash clothes in hot water, and it is easy to burn clothes.

That's too, every time you go in Leng Xiaojing, this time it's a water heater that should be broken, and you should find a professional repairer to show you.

How do you feel that the washing machine is hot water, generally after washing, the clothes are a little warm to the touch, and the warm feeling is not hot water.

In this case, it is likely that the pipe is clogged or the water heater is broken, so it is possible to do both.

This is also possible, I think you should still repair this washing machine, because if this washing machine is not repaired well, it may affect your future life.

It's not necessarily that the water heater is broken, it's likely that you turned on the wrong switch, and you double-check it again.

Every time it's Leng Xiaojing, this time it's hot water, and the water heater is broken, so you have to check if the water heater is a problem with the faucet, otherwise how can it get water?

I just placed an order to buy a dishwasher, considered connecting to the hot water pipe, and saw a lot of information that said that the hot water scaling is more serious, and if the dishwasher is scaling, it is very troublesome.

The dishwasher of about 4,000 yuan has resin and other materials inside, which can effectively prevent scaling when combined with dishwashing salt.

You probably screwed the hot water part of the water inlet switch.

This is not easy to say, it is recommended that you directly call the after-sales customer service**, and let the master come to check.

The washing machine is the evil dragon Xiaojing every hour, if you get hot water this time, which one is indeed the problem, you pick it up again, is it caused by a problem with the pipeline somewhere?

Whether it has been repaired and then connected to the wrong water pipe, it generally does not appear in the situation you said.

The first-class washing machine, every time the water comes in, it is cold water, and now it is hot water, do you see if it is because the weather is too hot? Then the water inside the water pipe is heated.

The washing machine is hot water every time. Whether this water heater is broken or not, I think you can go and check it directly to see if he is determined.

This washing machine is cold water tip every day, so it will take a long time, which is not good for the washing machine.

The washing machine does not need hot water.

There is only one water inlet.

This phenomenon is generally caused by limescale, and the accompanying phenomenon is that the hot water output is significantly smaller than the cold water output. If the water is too high, the water heater will start automatic protection and cut off the gas ** to cause the flameout. As the water continues to flow, the water heater temperature control system detects that the water temperature has dropped and is no longer dangerous, and will automatically restart the ignition heating, and the hot water will be produced again.

The temperature of the heat exchange surface of the water heater is very high, and scale will be generated when the water flows over, and over time, scale will accumulate in the heat exchanger and in the hot water pipeline, resulting in the lag of temperature sensing, resulting in the hot water being hot and cold, and seriously causing the hot water to overheat and cause the overheating protection to go out. In this situation, you can buy a set of gas water heater without removing the scaling device online, and use it to inject descaling agent into the water heater to clean the inside of the water heater and the inside of the hot water pipeline, the operation is simple and convenient, and it can be cleaned regularly after use, when this problem can be avoided again.

The main reason is that the moisture in the bathroom is too large, and the circuit boards of the washing machine and water heater will be damp to a certain extent if they are in this environment for a long time;

After the circuit board is wet, the insulation performance between the various components will be greatly reduced;

When the voltage is unstable, it is easy to burn the circuit board;

Here's how to estimate your washing machine and water heater breakdown:

1. The circuit board of the washing machine is seriously damp, and the circuit board is burned when it is used again;

2. When the circuit board of the washing machine is burned, the power supply fluctuates;

3. This fluctuation causes problems with the circuit board of the water heater.

Preventive measures: 1. The toilet should be ventilated in time when not in use;

2. Always pay attention to the water not to get into the seams of the circuit cover of the washing machine.

Friend, you check the power plug board of your bathroom if there is no trace of scorching and the power supply voltage is normal, the problem is purely coincidental, according to the fault phenomenon of the electrical appliances you mentioned, I judge: the electric water heater is not what to burn the board, now all the after-sales for the fuse on the circuit board to burn off are collectively called burning, sometimes it is the yuan of the fuse tube replaced, you can think about it, there is no protection for the instantaneous current impact circuit board? --No way!

I have dealt with similar problems are all burned insurance, quite a lot of a buck capacitor is bad (2 yuan). Can you explain the fault of the washing machine more clearly? Can the inlet water reach the agreed water level?

Is it a 3-minute turn? Fill it out and I'll help you.

For example, when thunder, some lightning may enter the home circuit, or the distribution circuit fails, and other preventive measures: 1. Unplug the appliance when it is not in use.

2. Use a qualified home voltage regulator.

Due to the humid environment of the bathroom, the circuit board of the two household appliances in such an environment for a long time was short-circuited. . .

It can only be said that it is a coincidence, and the main reason is that the bathroom is damp.

Voltage instability Use a voltage regulator.