How to use smart washing machines? How to use a smart washing machine

Open the faucet valve, for fully automatic washing machines, there is generally a water level detection device, which cannot be opened without water.

Connect the washing machine plug to the power supply, the washing machine is best to use a socket with a switch to avoid the machine being powered on for a long time, so that the standby situation consumes very little power, but it will affect the life of the circuit board.

It must be the first to select the program and then select the water volume, otherwise the water volume will change, the water volume adjustment is the same as the program, it is also a cycle selection, and the amount of water indicated by flashing and steady light is not the same. After selecting the amount of water and the program, press the Start Pause button.

After adjusting the amount of water, you need to close the lid so that the washing machine can run normally.

Here's how:

1. First of all, you need to connect the power plug of the drum washing machine and open the water valve, which is a prerequisite for the washing machine to work.

Figure 1. <>

Figure II. 2. Press the washing machine door handle to open the washing machine door, and then put the clothes into the drum, and be sure to cover the lid.

3. Open the detergent dispensing box and put in the laundry detergent or detergent.

4. Turn on the power switch of the washing machine.

5. Select the laundry mode according to the different clothing materials, adjust the knob of the control panel, and the position pointed by the indicator light is the current laundry mode.

6. After selecting the washing mode through the knob, the water temperature, dehydration speed, rinsing, pre-washing, etc. can be adjusted separately through the button on the right side, and a parameter can be changed every time the button is pressed.

7. After adjusting the parameters, you can press the start pause button for automatic laundry.

Smart washing machine washing is a washing program that is set in advance according to the time, water level, and washing intensity selection standards according to the fabric material.

Standard washing, is a single washing, two bleaching, three spin drying of the clothes in the barrel of the standard program, in general, the standard program is selected, the difference is: intelligent washing is a process that artificially requires the washing machine to wash the clothes, and the standard washing is that the washing machine originally had a standard program.

Under normal circumstances, some people will choose the standard program, intelligent washing is a process that can be selected according to the Xunlu demand for washing clothes, and standard washing is a program that the washing machine already has.

Introduction to washing machines

Washing machine is a cleaning appliance that uses electrical energy to produce mechanical action to wash clothes, and is divided into two categories: household and collective use according to its rated washing capacity. China stipulates that the washing capacity is less than 6 kg in Huachang and belongs to the household washing machine: the household washing machine is mainly composed of a box, a washing and dehydration bucket, some washing and dehydration barrels are separated, transmission and control systems, etc., and some are also equipped with heating devices.

Washing machines generally refer to the use of water as the main cleaning liquid, as opposed to the use of special cleaning solutions, and the dry cleaning that is usually carried out by a dedicated person.

From a national perspective, the current penetration of China's washing machine market has exceeded 76%, of which the urban market has exceeded 96%, and the rural market has also exceeded 53%. With the country's policy of sending household appliances to the countryside and expanding domestic demand, washing machine companies have set their sights on the rural market with greater consumption potential.

The steps are as follows: 1. Select the appropriate triangle plug, plug it into the power supply, and ensure dryness.

2. Unscrew the faucet and put the drain next to the floor drain to facilitate drainage.

3. After the power is turned on, you can start the washing machine, and press the power button.

4. According to the washed clothes, select the appropriate washing mode, and press to switch to an inner mode.

5. Choose different cleaning steps according to the cleanliness of the clothes, and also press to change the mode.

6. Press the start button to start washing the clothes, just wait for the cleaning to dry after the cleaning is completed.

It depends on what brand you buy, and it is recommended to read the manual of the random device strap to determine whether the machine supports time adjustment settings. Nowadays, there are many low-end automatic washing machines on the market that do not support time adjustment settings.

The settings of each automatic washing machine are different, please refer to the manual.

The operation method of the fully automatic washing machine is as follows:

Plug in the power plug, put down or connect the drain pipe, turn on the tap of the water, put the laundry, washing powder and additives (softener, bleach, etc.) into the washing machine, and close the cover;

Press the power switch, select the water level according to the amount of laundry to be washed, and select the program according to the specific conditions such as the dirty stroke and material of the laundry;

Press the "Start Pause" button and the washing machine starts working;

When the selected program finishes working, the buzzer will beep;

When the work is finished, turn off the power switch and unplug the power plug from the socket, turn off the tap and then open the cover, take out the laundry, clean the wire chip filter bag, and wipe the washing machine dry.

1. Plug in the power supply, unscrew the faucet, and put the drain pipe next to the floor drain to facilitate drainage.

2. Press the power button first, turn on the power, and put the clothes in.

3. Set in order, wash button, press it, adjust the washing time, generally adjust it for more than 10 minutes, and you can adjust it for a few more minutes when there are many clothes.

4. Rinse once or three times, and rinse twice.

5. The water level is divided from one to ten grades, and if there are fewer clothes, it can be adjusted to the second level, and if there are more, it can be adjusted to seven.

6. All that's left is to press start, and the water will be injected slowly, don't forget to put laundry detergent.

7. The last is dehydration, set for a few minutes, after that, it will automatically stop, ** remind, cut off the power by itself. In addition, there is a drying function, and if the clothes are in a hurry, you can set a few minutes to dry.

Summary. 1.Open the faucet valve first, for fully automatic washing machines, they are generally equipped with a water level detection device, which cannot be opened without water.

2.Connect the washing machine plug to the power supply, the washing machine is best to use a socket with a switch to avoid the machine being powered on for a long time, so that the standby situation consumes very little power, but it will affect the life of the circuit board. 3.

Put the clothes in the washing machine, taking care that the total weight does not exceed the weight stated on the washing machine model. Then turn the washing machine power key on. 4.

Choose different washing methods according to the material of the clothes, press the program key once to change a washing mode, and this function is cyclically converted.

1.Open the faucet valve first, for fully automatic washing machines, they are generally equipped with a water level detection device, which cannot be opened without water. 2.

Put the washing machine plug on the power supply before connecting the code, and it is best to use a socket with a switch to avoid long-term power-on of the machine, so that the standby situation consumes very little power, but it will affect the life of the circuit board. 3.Put the clothes in the washing machine, taking care that the total weight does not exceed the weight stated on the washing machine model.

Then turn the washing machine power key on. 4.Choose different washing methods according to the material of the clothes, and press the program key to change a washing mold orange mold spring type, and this function is cyclically converted.

Friends, I really don't understand, you can be more specific.

1.Open the faucet valve first, for fully automatic washing machines, they are generally equipped with a water level detection device, which cannot be opened without water. 2.

Put the washing machine plug on the power supply before connecting the code, and it is best to use a socket with a switch to avoid long-term power-on of the machine, so that the standby situation consumes very little power, but it will affect the life of the circuit board. 3.Put the clothes in the washing machine, taking care that the total weight does not exceed the weight stated on the washing machine model.

Then turn the washing machine power key on. 4.Choose different washing methods according to the material of the clothes, and press the program key to change a washing mold orange mold spring type, and this function is cyclically converted.