How to adjust the sound of Redmi Bluetooth headphones, how to adjust the volume of Xiaomi Bluetooth

You can adjust the volume by pressing your own buttons, or on a phone that has been successfully connected.

1,There is a button on the Xiaomi Bluetooth headset to directly adjust the volume,In the position of the inner side。

2. There are 2 buttons in the internal test, adjust the volume, and press and hold one of the buttons to switch songs.

3. Of course, you can also adjust the sound volume of this Bluetooth headset through your mobile phone, and check the manual for the first time.

4. Note that the effective use range between the mobile phone and the Bluetooth headset is within 10 meters, and it will be disconnected if it is exceeded.

In the charging state, press and hold until the red and blue flashing lights alternately to restore to factory settings.

That's it. Mine also had this problem, I don't know what caused it. Just do a factory reset.

With the trend of Bluetooth wireless technology and mobile phones gradually canceling the headphone interface, the use of Bluetooth headsets is becoming more and more common, but for netizens who use Bluetooth headsets for the first time, the headache is how to adjust the volume of Bluetooth headsets, different Bluetooth headsets have different designs, and the following is an introduction to several common adjustment methods, I hope to help you.

How to adjust the volume of Bluetooth headphones.

1. Some Bluetooth headsets have a volume adjustment key on the headphones, which can be adjusted directly at the top;

2. At present, some small true wireless (TWS) earphones are not equipped with volume adjustment buttons on the earphones due to their small body, and you can control the volume of the earphones through the volume adjustment function on the mobile phone to achieve global adjustment of the volume;

3. Whether you are talking or listening to songs, you can adjust the volume knob or button on the Bluetooth headset, provided that your Bluetooth headset has this function. Some low-end or featured Bluetooth headsets do not have this function;

4. When calling, you can adjust the volume in the Bluetooth headset by adjusting the call volume of the mobile phone. Generally, when you are on a call, press the upper button to increase the volume;

5. When listening to songs, adjust the volume of the Bluetooth headset by adjusting the volume setting in the listening software;

The above is the introduction of how to adjust the volume of Bluetooth headphones, you can check the manual of the product to learn how to adjust the volume of the Bluetooth headset product

**Volume Settings:

Method 1: Set it in the "Sound" of the phone, enter the "Sound" setting of the phone, find the "**" item, and turn the volume of "**" up or down.

Method 2: Enter the ** volume setting of the car navigation all-in-one machine, and turn the volume on and up.

You can adjust the sound of the headphones by turning the volume keys of your phone up or down.

On the bus, you can wear wireless headphones to listen to songs, play **, play games, etc., and the background sound of this environment is more complicated, and we may need to turn up the volume of the headphones. So how to adjust the volume of Xiaomi Bluetooth headphones? Let's take a look

Ear stem control setting method:In the Bluetooth settings of the mobile phone, enter the device details page, click on the gesture settings, and set the left and right ear gestures respectively: press twice - volume plus; Press three times – volume down.

After the setting is complete, press the left and right earphone stems twice to increase the volume, and press the left and right earphone ear stems three times to decrease the volume.

Voice control settings:In the Bluetooth settings of the mobile phone, enter the device details page, click the gesture settings, set and hold the left and right earphones to wake up the voice assistant, and after the settings are completed, when the earphones are worn and connected to the mobile phone, the volume can be controlled by the command words "volume increase" and "volume decrease".

This article takes Xiaomi Flipbuds Pro && Mi 11 as an example for MIUI 12 system.

The method of re-pairing Xiaomi Bluetooth headset is as follows:Operating tool: Redmi Note4

Operating system: MIUI

Operating tool: Xiaomi Bluetooth 5547 earphones.

1. Open your phone, find the settings, click to open, find the Bluetooth option in the settings and click to enter.

2. In the open Bluetooth settings, click to turn on Bluetooth, and turn on the open detection switch of Bluetooth at the same time.

3. Take out the Bluetooth and press and hold the switch on the Bluetooth for about 10 seconds, you can see that the lights on the Bluetooth are flashing alternately and are in the pairing state.

4. After the Bluetooth pairing mode is turned on, tap Refresh in the Bluetooth settings of the mobile phone, and the unpaired Bluetooth will appear after a while.

5. After the Bluetooth appears, click the Bluetooth to be paired and it will be automatically paired.

6. After successful pairing, Bluetooth will be displayed.

Take the Redmi Note 8 phone as an example:

1. Turn on your phone, find Settings, tap "On", find the Bluetooth option in Settings, and tap "Input".

2. In the "Turn on Bluetooth" setting, click "Turn on Bluetooth", and the open detection switch of Bluetooth will be turned on at the same time.

3. Take out the Bluetooth and press the Bluetooth button for about 10 seconds. You can see the lights on Bluetooth flashing alternately in the pairing state.

4. After Bluetooth turns on pairing mode, click Refresh in the Bluetooth settings of your phone, and unpaired Bluetooth will appear after a while.

5. Once the Bluetooth appears, click on the Bluetooth you want to pair and it will pair automatically.

6. After successful pairing, the Bluetooth connection will be displayed.

1. Under normal circumstances, unplugging the earphones from the mobile phone can turn the earphone mode to external sound.

2. If the headset mode cannot be removed by unplugging the headphones, check whether there are foreign objects or water stains in the headphone jack of the mobile phone, and check whether the mobile phone can sound after cleaning.

3. You can go to the phone settings to disable the headphone mode, the specific method is as follows:

1. First, click "Settings" on the desktop of your phone.

<>3. Then open "Headphones and Sound" to enter.

4. After entering, turn off the switch in the column of "Use Mi Yin to improve sound quality".

4. If none of the above methods can solve the problem, you can bring the mobile phone and warranty card to the official maintenance center of Redmi mobile phone for maintenance.

Redmi phone to set up bluetooth headset steps:

1. Turn on the on/off key of the Bluetooth headset, press and hold the on/off key until the indicator flashes red and blue lights alternately, and enter the pairing state;

3. After finding it, select the pairing connection, if prompted to enter the password, enter the pairing password in the mobile phone: 0000 (some pairing passwords are: 1234 or 8888), and the pairing will be OK if the connection is successful.

I don't have an instruction manual, so I think it will be automatically paired after holding it down for a few seconds.