The phone has a headphone logo and no sound

If you are using a Huawei phone and the headset icon is displayed on the interface of the phone without plugging in the earphones, you can do the following:

1.If there is liquid or dust in the headphone jack, try to clean it.

2.Try plugging and unplugging the headphones once or restarting your phone.

3.If your phone still doesn't display properly, contact Huawei Consumer Service** (950800), back up your data in advance (third-party apps such as QQ and WeChat need to be backed up separately), and bring your proof of purchase to a Huawei Customer Service Center near you for more assistance.

Boarding service. Huawei Customer Service Center.

Repair spare parts** inquiry.

The phone shows no sound on the headset icon, and the solution is as follows:

1. The earphones are not plugged in. Turn on your phone, confirm whether the earphones are plugged in normally, and observe whether there is a headphone logo on the top.

2. The volume of the mobile phone is too low. If you have a headphone logo, try adjusting the sound volume using the volume keys on the side of your phone. If the sound is too quiet, it may not be audible.

3. Set the mute cause. Go to Settings and tap Sounds & Vibrations.

4. After entering Sound and Vibration, select Turn Off Mute.

5. The headset comes with volume adjustment, the sound is too small, adjust the volume button of the headphone.

6. Check whether there are any foreign objects in the headphone jack, resulting in poor contact with the headphones.

The maintenance method of the mobile phone screen is as follows:

Under the strong sunlight radiation, the temperature of the mobile phone screen will become higher, and the screen will become higher and the first screen will drift and fail, and the screen is also some high-tech electronic products, there are some data transmission substances, and these substances are easy to deteriorate under high temperatures, so that the screen is insensitive or out of order.

Put a magnet on the screen, and you can soon find that the capacitive screen has a temporary failure, and it will cause permanent failure over time. So try to avoid close contact with your phone and other magnetic objects. <>

If you are using a Huawei phone and the headset icon is displayed on the interface of the phone without plugging in the earphones, you can do the following:

1.Try plugging and unplugging the headphones once or restarting your phone.

2.If there is liquid or dust in the headphone jack, try to clean it.

3.If your phone still doesn't display properly, contact Huawei Consumer Service** (950800), back up your data in advance (third-party apps such as QQ and WeChat need to be backed up separately), and bring your proof of purchase to a Huawei Customer Service Center near you for more assistance.

Huawei Customer Service Center.

Make an appointment for service. Boarding service.

Summary. Pro, 1. It should be caused by the failure of the micro switch of the headphone jack, that is, the headset has been pulled out, but the switch has not been disconnected in time. 2. You can try to quickly plug and unplug the earphones several times to see if you can make the earphone logo disappear, or restart the phone.

3. If it still doesn't work, it is recommended to take it to the after-sales outlets of the mobile phone for testing, repair or replace the new headphone jack. 4. The headphone mode is automatically switched, when the earphone is inserted into the earphone logo, it will come out, and the earphone logo will disappear automatically when the earphone is pulled out.

Kiss! Hello! Glad to serve you! Please be patient and wait for the 2nd branch brother to respect the bell, the dust and hail are being sorted out, and I will answer for you immediately, and please don't end the consultation!

Pro, 1, it should be caused by the failure of the micro switch of the headphone jack, that is, the headset has been pulled out, but the switch is not disconnected in time to shout the front bucket. 2. You can try to quickly plug and unplug the earphones several times to see if you can make the earphone logo disappear, or restart the phone. 3. If it still doesn't work, it is recommended to take it to the after-sales outlets of the mobile phone for testing, repair Zheng Mo or replace the new headphone jack.

4. The headphone mode is automatically switched to remorse, when the earphone is inserted into the earphone logo, it will come out, and the headphone logo will disappear automatically when the earphone is pulled out.

Dear, the reason why the mobile phone displays the headphone mode and the solution method: it is because of the foreign body in the earphone. This situation is mostly related to the sloppiness and carelessness of the first quiet user, the solution is very simple, find a relatively fine thing, clean the headphone jack, and clean up the dirty things inside.

The mobile phone is transported by water and causes a short circuit. In this case, you can go to a repair shop and have it repaired by a professional.

If you are using a Huawei phone and the headset icon is displayed on the interface of the Conghu phone without plugging in the headphones, you can do the following:

1.Try plugging and unplugging the headphones once or restarting your phone.

2.If there is liquid or dust in the headphone jack, try to clean it.

3.If your phone still shows an abnormality, please contact Huawei Consumer Service** (950800), back up your data in advance (third-party applications such as QQ and Weifeng Pai Blocking Letters need to be backed up separately), and bring your purchase voucher to a nearby Huawei Customer Service Center for further assistance.

Huawei Customer Service Center.

Repair spare parts** inquiry.

Make an appointment for service.

There is no sound when a headphone icon appears on the phone, it is because the headphone jack is damaged or the headphone jack is blocked by dust.

1. The headphone jack is damaged: When the headset is inserted, the metal Wang Xiao contact in the jack will be touched, and the sound output will be automatically switched to the earphone after touching, but if the jack is damaged, the metal contact cannot be touched correctly, causing the mobile phone to think that the headset is still plugged in and cannot switch to the speaker output sound.

2. Dust blockage of the headphone jack: The dust and dirt accumulated in the jack may interfere with the normal operation of the metal contacts, causing the phone to mistakenly detect that the headphones are plugged in and switch to the headphone output.

Headphone line issues: If the headphone line is damaged or loose, it may cause the phone to mistakenly think that there are headphones plugged in and output sound to the headphones.

The headphones sometimes appear silent on one side:

Sometimes there is no sound on one side when using the headphones, which can be caused by the following reasons:

1. Dirty interface of the earphone: Dust and dirt in the interface may cause the earphone to be in poor contact, resulting in the sound cannot be output.

2. Earphone line damage: If the earphone line is damaged or loose, it may cause one or two speakers of the earphone to fail to work.

3. Imitation damage to the headphone jack: The metal contacts in the jack may be damaged or deformed, resulting in one or both speakers of the headphones not working properly.

4. Unilateral failure of headphones: Sometimes there is a problem that one or two speakers of headphones themselves fail. <>