Window could not complete the installation to install Window on this computer

How to Fix Windows Won't Complete Installation. To install Windows on this computer, restart the installation.

After the system is installed and restarted, it enters the hardware detection and corresponding driver start stage, and suddenly prompts: Windows installer cannot configure Windows to run on the hardware of this computer, and then it will enter an endless loop, constantly reminding and reinstalling, to no avail. As a result, the masters of all walks of life made their own tricks, repartitioned and reformatted; Constantly change the system mounting plate; Wait a minute.

The idea was right, but it missed the point. There are several reasons here: 1. Most of them install win7, especially 64-bit.

2. Most of them use new 750g7200 rpm hard disks. 3. There is SATA Operation in the BIOS option of the machine, which is used to configure the working mode of the built-in SATA hard drive controller. 4. The hash value of the ISO file is incorrect, that is to say, the ** is incomplete.

With these points, it is obvious that the cause can be found and there is a way to solve it. The reason is to configure the working mode of the built-in SATA hard drive controller. Because new technologies emerge one after another, whether it is inter, whether it is a hard disk manufacturer, or Microsoft.

The pace of follow-up is inconsistent, and there will be fights. In fact, it is very simple, it is nothing more than a chip patch for Inter, such as the F6 patch of Inter, etc. Actually, seeing the 3 points I mentioned above, starting from the working mode of configuring the built-in SATA hard drive controller is the easiest thing to do.

First of all, F12 or F2 goes into the BIOS, depending on the model. Then select SATA Operation in the System Configuration option, and there are generally other options: ATA, AHCI, and RAID.

Just select AHCI and you're good to go. Don't select disabled. Save and exit everything OK.

If it still doesn't work: please try to change the system installation tool, for example, the original WinntSetup can try CGI or MDSN original system ISO built-in Setup installation. Recently new tips, be sure to verify your ** ISO installation package MD5, Thunder** may be incomplete, incomplete, incomplete in my customer situation.

Method. Part 1: How to solve the problem of "Windows cannot complete the installation to install on this computer".

First of all, there may be an error in the Windows installation configuration, which causes the Windows system installation to fail. This configuration will be affected by the currently running program. So, you can restart the computer and re-run the win7 system installer to try it.

Method 2: How to Solve the Problem of "Windows Cannot Complete Installation to Install on This Computer".

If this does not work, then you need to configure the system with command line arguments. When the "Windows cannot complete the installation, if you want to install Windows on this computer, please restart the installation" alert box appears. Quickly press the keyboard shortcut shift+f10 and a command line window will pop up.

In the black command line window that pops up, type regedit and press enter to open the registry. Find hklocal machine system setup status childcompletion

Change the value from 1 to 3, then close the registry and command window, click OK in the error window, and restart.

Method 3: How to Solve the Problem of "Windows Cannot Complete Installation to Install on This Computer".

Method 4: "Windows can't complete the installation to install on this computer" What to do.

If you can actually try to solve this problem from another angle. For example, change the installation method, use the U disk to install win7

The computer restarts unexpectedly or encounters an error Windows installation cannot proceed with the resolution steps as follows:

Operating Equipment: Dell Computer.

Operating system: win10

1. When this error occurs, press shift+f10, the system will open the command window, enter cd and press the enter key to return to the root directory, at this time the screen will display c: .

2. Next, enter CD Windows System32 Oobe.

3. Then type: msoobe or , and wait for the installation to complete.

Here's a list of the end screens that users see during OOBE, in the following order:

1. Language selection.

2. Region selection.

3. Keyboard selection.

4. Connect to the network.

6. Get the latest version from Windows.

7. End User License Agreement (EULA).

8. Sign in or create a local account or Microsoft account (MSA).

9. Set up Office. This screen appears only if the user is connected to the network and has provided their Microsoft account information.

10. Privacy Settings.

11. OEM registration page.

It is worth mentioning that this file, when opened, will put the system into a fake package interface.

There are several reasons for this situation, the first hard disk partition is wrong, resulting in the inability to complete the installation, and the system needs to be repartitioned and formatted. Second, there are hardware issues, including those caused by low memory and other configurations. Third, there is a problem with the installation file, if it is a disc with an optical drive, there is a high chance of appearing, try to change the installation file or disc.

Possible reasons why Windows Installer can't configure Windows to run on this computer hardware:

1. The most likely cause is a system-driven conflict, which is the main cause of these errors.

2. The second is the problem caused by disk partitioning, which is usually that there is no correct disk under the windows installation package.

Installing the Win10 system shows that the Windows installer cannot configure Windows to run on this computer's hardware is caused by an installer error, and the workaround is:

1. First of all, you need to press shift+f10 on the keyboard at the same time, as shown in the figure below.

2. Next, you need to enter the administrator command window and enter CD C: Windows System32 Oobe Enter to enter the Oobe folder.

3. Then enter the msoobe command Enter and complete the operation according to the prompts.

Possible causes: 1. The most likely cause is a system driver conflict, which is the cause of most of this error.

2. The second is the problem caused by disk partitioning, which is generally caused by the Windows installation package not being placed on the correct disk.

Solution: 1. For driver conflicts, after the error dialog box of [Windows installer cannot configure Windows to run on the hardware of this computer] appears, press shift+F10 (the notebook needs to press FN at the same time), the command window will open, enter cd oobe and press Enter, enter MSOOBE and press Enter, and wait for the installation to be completed smoothly.

2. In view of the problems caused by disk partitioning, use automatic partitioning software to re-partition and format the hard disk, select the right disk type, and complete the fast partitioning. If there is no need to split the disk, there is no need to split the disk, if necessary, of course, you can choose to divide the disk into several disks, and install the system again after completion.

Windows can't complete the installation. To install Windows on this computer, restart the installation is caused by an installation error, and the workaround is:

1. On the Windows 10 system desktop, right-click the start button in the lower left corner of the screen, and select the menu item "Run" in the pop-up menu.

2. Next, enter the command regedit in the running window of Windows 10 that opens, and click the OK button to run the command.

3. Next, in the open registry window, we locate the computer hkey local machine system setup status childcompletion registry key.

4. Then find the registry key of the setup in the window on the right.

5. Right-click the registry key and select the menu item "Modify" in the pop-up menu.

6. Next, enter the numeric data as 3 in the open registry key value window, and finally click the OK button.