Is it worth fixing a broken watch movement? Where to fix the broken watch

Movement repair. 1.The casing of the movement is generally not fixed with screws, it is stuck together with each other, and all the buckles of the casing can be gently pried open with a flathead screwdriver when disassembling.

2.Pry it open and then gently pick up the case, being careful not to bring out the internal gears and not to shuffle the order.

3.Then set the gears aside and remember the positive and negative directions of the gears and their respective positions.

4.After the top gear is removed, take out the circuit board on the right side, and then wipe the power connector with sandpaper or paper.

5.After wiping, you can install the watch hands and battery first to see if they are normal. If it is normal to install it, if it is not normal, check whether the teeth are installed in place and whether the power connector is good.

6.When the movement is tested and installed on the dial, be sure to install the watch hands on the hour.

It is recommended to go to a professional repair center for repair.

Damaged watch movement is the most serious damage in a watch, and the watch movement is the most important part in a watch, and it is really troublesome to repair if it is damaged! It is still possible to repair the broken movement of the watch, but you must find a professional luxury repair and maintenance center to repair it.

Hello, it can be repaired, it is recommended that it is best to take it to the counter for repair. If you want to repair the movement, it is still very troublesome to replace it, and you must take it to a professional after-sales service center. Fujian's words are not official Longines after-sales service.

If the water ingress is not serious, but there is a layer of fog in the watch glass, you can wear the surface face inward and the bottom shell outward, and wear it on the wrist, and the water vapor can be eliminated after two hours. If the water ingress is severe, it is best to immediately send it to the watch shop to wipe the oil and remove the moisture from the movement to avoid rust on the parts.

Mechanical watches can be divided into manual winding and automatic winding according to the difference in the way of winding, and the current mechanical watches are mainly automatic. The power of a mechanical watch** is powered by the mainspring in the movement, which drives the gears and then the hands.

The movement of the watch is actually the most critical part of the watch, and once this part is broken, the impact on the watch is particularly large, so you must pay attention to the maintenance of the movement when you use it at ordinary times.

This depends on the value of your watch, if your value is relatively high, it is recommended to repair it, if it is an ordinary watch movement is broken, it is equivalent to the computer's CPU without any repair value.

The most important thing about a watch is a movement, if you want to repair it, it is equivalent to an overall overhaul, ** will not be less, I don't think it is particularly precious and does not need to be repaired.

Hello is not worth repairing, it depends on the price of this watch, if the price is very low, there is no need to repair it at all, and then if the price is high, you can also consider it.

It depends on two things.

This watch is not worth much.

There is also the question of whether this watch has any special significance.

As long as one of these points is satisfied, then repair.

It can be repaired, and it is still very troublesome to replace the movement, and if you want to repair it, you must take it to a professional after-sales service center. ‍

If the watch is broken, you can go to a watch store to repair it.

When choosing a watch repair, choose a watch shop instead of going to a private repair shop. Otherwise, it will not help the repair of the watch, but it is easy to damage the watch.

Precautions for watch repair:

1. Before the watch is repaired, you should have a basic understanding of your watch failure, including the watch case, dial and whether the watch is scratched, etc., so as to communicate with the watch repair master in time.

2. Don't easily believe the advertisements of the watch shop, you can check the equipment and oil they repair the watch, if there are no more than 4 or 5 kinds of watch oil, don't repair it at his place.

3. Since inspection and careful inspection of the physical object are indispensable links in the maintenance of watches, try not to repair them quickly, and do not believe in the immediate and desirable promises.

4. Before the maintenance, you should negotiate with the watch repair master, and after the maintenance, you should also ask for all the replaced parts, especially for the watch that has changed the gear or the circuit board during the maintenance. Don't forget to make sure that the repair invoice and the detailed registration sheet covering the internal meaning of the repair, the parts that have been replaced, and if it is imported, also be indicated, and then let him stamp it. <>

Depending on the degree of damage to the mechanical watch, it is necessary to decide whether it can be repaired.

Here's how to fix the table here:

1. You can go to the place where you bought the watch for maintenance, if it is damaged by the quality of the watch during the warranty period of the watch, it can generally be repaired or replaced free of charge.

2. You can choose to go to the accessories of the clock maintenance number for maintenance.