Where is it better to repair a Vacheron Constantin watch if it is broken

Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can be parked, but there are several main reasons.

1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.

2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.

3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.

There will be after-sales ** on your warranty link, call after-sales ** to inquire about the after-sales address.

Swiss watch care and daily use precautions:

1.Do not use the watch (including waterproof watch) in hot baths, saunas, large amounts of water vapor and environments with drastic changes in temperature and humidity.

2.Do not operate the watch's buttons and adjust the crown while in water. In normal use, the non-screw-down crown should be pressed back into its original position and the threaded crown should be screwed down to prevent water from penetrating.

3.Please clean the strap and case regularly. It is recommended to go to a professional watch cleaning and repair station for maintenance, even if the watch is very waterproof, the watch should not be left in water for a long time and cleaned by soaking.

4.If the strap material is easy to seepage, avoid contact with water, moisture, cosmetics, and other items containing chemical ingredients, and avoid exposure to the sun to prevent fading and deformation. Leather straps are consumables and must be replaced regularly if worn regularly.

5.The watch must not be subjected to severe impact or falling, and the watch should not be strongly touched to the surface of an item of the same or higher hardness, such as oxide metal, quartz crystal, grinding stone, sandpaper, granite surface, concrete wall, etc. Make it a habit to keep the watch in a safe place when you take it off.

6.Do not place your watch next to electrical appliances (e.g., stereos, refrigerators, computers, etc.) or magnetic objects (e.g., magnets, mobile phones) that generate magnetic fields. In addition, the magnetic buckle of the luggage switch may also make the watch magnetized, causing the watch to be inaccurate or temporarily stopped.

7.Do not adjust the watch date between 22 o'clock and 2 o'clock, so as not to cause damage and inaccurate calendar jumping, if you need to adjust the time of the watch, please press the crown clockwise, do not dial counterclockwise.

8.Do not disassemble the watch by yourself under any circumstances. If the watch is removed from any non-authorized repair point, the watch will no longer be warranted.

Reasons why the watch stops when walking:

Generally there is a problem with the core wheel or gear teeth, if it is an old watch, it is mostly related to the wear of the shaft eye of the bridge, and the wear of the shaft eye will make the core wheel tilt in the bridge, which is easy to cause the front end of the minute hand to rub against the dial character or the hand indicating the number of seconds on the clock, and the two-hand and thin watch will rub against the inside of the watch glass.

If the watch is used for a long time, then its wear and tear will be more serious, and the external maintenance of the watch will be easily damaged. It is necessary to regularly replace the watch you are wearing, and it is necessary to maintain the watch regularly, for the service life of your watch, it is better to maintain it regularly.

Stop, there may be the following reasons:

1. See if the crown is pulled out, the crown is pulled out, and the watch stops.

2. Whether the second hand touches the glass, there will be a circle mark on the glass.

3. Whether the three watch hands are not well balanced, causing contact and causing stopping.

4. Whether the battery is exhausted or not, it generally needs to be replaced in 1-2 years.

It is recommended that you can open the warranty copy attached to the purchase form, under normal circumstances, there will be a service address on the warranty copy, or find a formal service center for testing and maintenance store address, etc., if there is a professional after-sales maintenance center nearby.

Tianjin International Financial Center, there are professional technicians here to solve any problems with the watch for you, it is recommended to call ** for detailed consultation.

The watch is gone.

In fact, there are many reasons why mechanical watches do not go, such as: bumps, movement gear misalignment, magnetization of the watch, shelving for a long time, sludge drying, etc., generally divided into two kinds, the first is because of insufficient kinetic energy. The second is due to a malfunction of the mechanical watch.

Therefore, don't panic too much when you find that the mechanical watch is not leaving, and first distinguish which kind of big one it belongs to.

The reasons can be divided into several reasons: insufficient activity, insufficient kinetic energy, the watch is magnetized, and the movement is dried up. 【11th Floor, Block D, Bloomage International Center】The above is the reason why the watch is not accurate, I hope it will help you.

Specifically, look at what's wrong with the watch. It is recommended that you can open the warranty coupon attached to the purchase of the watch, and under normal circumstances, there will be a service address on the warranty copy, or find the address of the regular watch service center for testing and maintenance.

Daily repair methods for water ingress in the watch:

1. Dry the granules with silica gel. If water enters the case, you can use a granular substance called silicone to put the watch in an airtight container with the waterlogged watch, and after a few hours, remove the watch and the water will disappear.

This method is simple and economical, and there is no damage to the accuracy and longevity of the watch. The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

2. Bake with a light bulb. If the water ingress is not serious, but there is a layer of fog in the surface glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, and bake it at a distance of 15 cm from a 40-watt light bulb for about 30 minutes to eliminate the moisture. Do not bake the watch mask directly close to the fire, so as not to deform the watch by heating.

3. Wear the watch backwards. You can also put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the moisture can be eliminated after two hours. If the water ingress is severe.

Maintenance method: Vacheron Constantin watches require regular maintenance to ensure their proper functioning. Maintenance includes cleaning and adjustment, restoring proper lubrication, the latter of which reduces wear and tear on components and thus extends the life of the movement.

For this reason, we recommend a "full service" every 3 to 5 years for manual or automatic watches, and every 6 to 7 years for quartz models. Keep in mind that the more complications and components a watch has, the more it needs to be regularly serviced by our master watchmakers.

Reference: Vacheron Constantin official website - How should I take care of my watch?

Vacheron Constantin After-Sales Centers in first-tier cities such as Beijing, Shanghai, Guangzhou, Shenzhen, Tianjin, Chengdu, Changsha and Wuhan.

Vacheron Constantin, the full name of Vacheron Constantin, is a Swiss luxury watch brand, founded in 1755 by Jean-Marc Vacheron in Geneva, Switzerland. Vacheron Constantin has inherited the essence of Swiss watchmaking tradition, from simple and elegant styles to intricate designs, demonstrating the pursuit of technology and aesthetics, and has been included in the list of the world's top 500 brands.

In today's society, where profit comes first, and the balance between pay and return is emphasized, Vacheron Constantin has always adhered to the spirit of the brand's heritage. Following the brand's belief of "dedication and excellence" and past experience, Vacheron Constantin continues to create high-quality wrist treasures.

Precautions for wearing the watch

1. Wearing a watch must be correct, many people like to wear a watch, the watch chain and hand are tighter, in fact, this is the wrong way. Because if the watch is fastened, it is not good for the meridians of the human body, and the bracelet of the watch will be buckled for a long time and rub against **, and slowly lose its luster.

2. We have a certain skill when we bring a watch, that is, girls should wear a watch loosely, and the best bracelet can be dragged down slightly, so that your hands are very slender. If you fasten it, it will look very ugly and feel very restrained.

Reference: Encyclopedia - Vacheron Constantin.