The correct usage of the bottle warmer, is it okay for the bottle warmer to warm the milk at 45 degr

The use of the baby bottle warmer is as follows:

First of all, the bottle warmer should be energized, and the bottle warmer should be preheated first, which generally needs to be preheated for about two minutes, and then the bottle should be put on. Generally, there will be an indicator light on the bottle warmer, and the indicator light will turn on when the heat is enough.

There are three types of bottle warmers: water-added type, water-free type and digital timed bottle warmer. It should be noted that the water-filled bottle warmer is to add water after the bottle is put in, and the water surface height should not exceed the bottle warmer port by two centimeters. It is recommended to follow the instructions for specific use.

If you don't finish the milk, you can put it back in the bottle warmer to keep it warm.

The steps for proper use of the bottle warmer are as follows:

1. First of all, you should put the bottle on top of the bottle warmer before using it.

2. Then add warm or cold water, remember not to add too high water, about 2 cm lower than the port of the bottle warmer, otherwise the water is easy to fill up.

3. Then power on, rotate the button to the appropriate temperature, wait patiently for a few minutes, you can see that the indicator light on the bottle warmer will turn off automatically, indicating that it has reached the temperature requirements.

4. But you can't take the bottle out of it immediately, but wait for two or three minutes for the milk temperature inside the bottle to be consistent with the outside water temperature, and then take it out after two or three minutes to give the baby milk. If you find that the milk is cold halfway, you can also put the bottle back and warm it again to warm the milk twice.

It is okay to warm the milk at 40-45 degrees in the bottle warmer, and the warm milk needs to be drunk immediately and cannot be kept for too long.

When purchasing a bottle warmer, you should choose a temperature control range of 40 degrees Celsius to 100 degrees Celsius, low temperature can warm milk, medium temperature can heat rice cereal, etc., high temperature can be used for disinfection, a variety of purposes are more practical.

Generally, it takes about 5 minutes to adjust to the 3 1 base position, and about 3 minutes is enough in the middle, of course, it is best to turn the bottle frequently during the period to make the bottle evenly heated.

Scalding is the most traditional method of warming milk, but the disadvantage is that it is inconvenient to control the temperature of the milk, if the water temperature is too high, the temperature of the milk will also rise, and it is easy to destroy the nutrients in the milk. In order to overcome the shortcomings of the water-proof scalding method that cannot accurately control the temperature, a kind of milk warming artifact has appeared on the market - bottle warmer. The following is how to use the bottle warmer that I have compiled for you, welcome to refer to it

The bottle warmer, also known as the bottle warmer or bottle warmer, can be used to heat the fresh milk taken out of the refrigerator, keep the milk powder prepared in advance, or some babies drink milk intermittently, at this time you can also put the milk in the milk warmer to keep warm. There are three common bottle warmers on the market: water-added bottle warmers, water-free bottle warmers, and digital timed bottle warmers.

Be careful, don't fall into the mistake of warming milk

For warm milk, many careless novice mothers are easy to fall into warm milk misunderstandings, take a look at the following 3 warm milk misunderstandings, have you also made it?

Myth 1: Heat milk in the microwave. Some mothers use the microwave to heat the milk, but we don't recommend using this method. Microwave heating, when the temperature is too high, it is likely to cause the deterioration or loss of some nutrients in the milk powder, and it is easy to cause the milk to be too hot.

Myth 2: Heat the milk and boil it before cooling. Although boiling can sterilize, mothers know that a variety of nutrients in milk powder are not heat-resistant, and if the temperature is too high, the nutrients in the milk powder will also be denatured due to heat. The baby's nutritional status is very hurt.

Myth 3: Milk is in the bottle warmer for more than 3 hours. It is best to drink the prepared milk powder immediately'This ensures that the temperature is right and prevents the milk from spoiling or growing bacteria over time.

The prepared milk should not be stored in the bottle warmer for more than 3 hours without eating. If you have already eaten and there are leftovers, it is not advisable to continue to keep warm for the next feeding.

Tips: In the case that the milk powder cannot be guaranteed to be brewed and drunk, mothers can also prepare a thermostatic milk mixer. The thermostatic milk mixer can directly drink water at a constant temperature, and control the water temperature at the brewing temperature of the milk powder, so that the mother can prepare the appropriate temperature milk at any time and give the baby to drink at any time.

Water bottle warmer: When used as a bottle warmer, the bottle should be put first and then water, and the height of the water surface should be about 2 cm lower than the bottle warmer port. Adjust the knob and select the desired temperature.

After a few minutes, the indicator light turns off, indicating that the water temperature has reached the required level, because the milk temperature in the bottle will take 1 to 2 minutes to reach the water temperature outside the bottle due to the barrier of the bottle. For the unfinished milk, you can put the stool back into the bottle warmer to keep warm, and take it out when you need to drink it.

If you want to heat the tea in a metal cup, you can remove the water bowl and place the cup directly on the electric heating plate. A small amount of water is pre-dripped on the stainless steel disc surface to conduct heat, which can improve the heating efficiency.

The water-free bottle warmer can also be used as a water-added warmer because it does not add water to heat and grind slowly.

Can be used as a bottle warmer: Put the bottle into the bottle warmer and add water, the height of the water surface should be about 2 cm below the port of the bottle warmer. Adjust the knob and select the desired temperature.

After a few minutes, the indicator light turns off, indicating that the water temperature has reached the required level, because the milk temperature in the bottle will take 1 to 2 minutes to reach the water temperature outside the bottle due to the barrier of the bottle.

Count the blind pin word timing bottle warmer: set the heating temperature: after pressing the power button, through the + or key, select the desired temperature value, stop the button for about 3 seconds, the machine enters the heating and heat preservation state.