Suglon Warm Bottle Plugged in and kept calling?

If you plug in the power supply and it still keeps on, this situation has been called, it should be this one may not have selected a key, so you need to turn on the key and then use it.

If it is not improperly operated, the alarm has been sounding when plugged in, it should be caused by the failure of the machine, and contact the after-sales service of the product for maintenance.

If the device keeps calling after plugging it in, then it is very likely that the normal power protection is not turned on or that there is a leakage.

It may be that the contact is not good, you unplug it and plug it back in, if it is on one foot, then you will get a professional repair repair without testing.

The bottle warmer keeps calling when plugged in, which proves that there is a problem with the control keys that have been completed, and generally speaking, there is a problem with the circuit.

The Sugland Warm Bottle is plugged in and keeps calling. He had a problem, especially a problem with the circuit, so he kept calling the police.

It may be that the temperature is enough, so there is also a possibility that he is nearsighted, and it may be that there is some malfunction during the feeding period, so it will make some noise when plugged in.

The Sugrand Warm Bottle Device keeps calling because the sound touch system inside is turned on by you, causing it to keep barking.

When the bottle warmer is plugged in, the sound that appears is the alarm sound caused by the fault of the circuit board, open the back cover to check whether there is water entering the bottle warmer.

If you plug it in and it's still calling, it may be that your warmer is malfunctioning, and of course it is also possible that your device has measured something, so it is caused.

If I let the bottle warmer be plugged in, I keep calling me that it may be a bad contact, or yes, there is a problem with the wiring.

Suglon Warm Milk Device keeps calling when plugged in? It's because it's a problem with the setting.,There's no setting right.,So re-set.,Follow the key operation you choose to have warm milk to set it.。

If it is plugged in, there is a sound all the time. It is very likely that he did not install his requirements for use, or it may be that it is not installed properly or there are some other foreign objects.

It should be that the milk did not return to its position when it was hot after the power was plugged in, causing the Sugrand Warm Bottle to keep barking.

If power is generated, it will be chirping all the time. In this case, it is because the warm water cup above you is not placed on it and the alarm is being called.

The cause of the failure of each electrical appliance is different, and the way of manifestation is also different, if you want to know what the reason is, then you have to check the manual.

It's possible that 10 minutes have passed, so that's why he keeps happening San'in.

The Suglon Warm Bottle Device keeps barking when it is plugged in. This is because the function of the control panel of the Sugrand Bottle Warmer is not the same.

Generally, there are many problems with this type of power supply.

Otherwise, the bottle warmer is plugged in and keeps calling, which may be caused by the temperature or the failure of the transceiver.

AC is directly connected, DC must be transformed.

Step 1: Locate the power socket on the appliance;

Step 2: Insert the end of the power cord that matches the above power socket into the power socket of the appliance Step 3: Plug one end of the power cord into the socket (on my wall, or on the power strip) OK, turn on the power switch on the appliance, and that's it.

Look at the instruction manual, it will teach you how to operate.

There's only a flashlight.,Despise the 2nd floor.,Repeater too.,Is a flashlight a household appliance? Sweat.

The batteries are all DC.

The ones who connect the household wires are AC.

It's stupid, don't you know. Light bulbs, motors, whatever, many, many...