What should I do if the Chinese tatami mat is moldy? How can I prevent mold on tatami mats?

Tatami mats occupy a relatively small area, but when it comes to daily maintenance, many people say "itchy teeth". Because the material of tatami mats is different from ordinary furniture, there will be many differences in maintenance. Tatami mats must be wiped with a dry cloth before use, not with water; Bending or pulling hard is prone to creases or deformation, which is not allowed; Rubbing with diluted vinegar can avoid yellowing and discoloration of tatami mats.

Make sure to vacuum carefully at least once a week to protect against insects and mold; In addition, tatami mats should be stored in a ventilated and cool place and should be exposed to sunlight for one hour every six months. If there are water and urine stains, wipe them with a hot towel; After washing the ink stain with milk, dry it with a hair dryer or in the sun on your back. During the rainy season, tatami mats need to be wiped daily with a dry cloth.

It has been rainy and wet for several days. Pay attention to turn on the air conditioner for dehumidification; Keep it dry and ventilated when the sun is shining.

If there is mold, clean the mold with a dry cloth dipped in dilute acetic acid; The yellowing of tatami mats does not affect normal use; When exposed to sunlight, both sides should be taken into account. After the rainy season, there is a lot of humidity indoors. You can open the windows for ventilation or use a dehumidifier to reduce the humidity in the room and avoid the tatami mats from getting damp and moldy; If the weather is good, you can take the mat to a dry and ventilated place and let it dry naturally without direct sunlight.

Many users enjoy the convenience that tatami mats bring, but there is nothing they can do about it. They don't know how to cope. Don't worry now.

If the tatami mat is moldy, you can refer to the above method to maintain it. As for moldy tatami mats, it's best not to pay attention to it until it gets moldy. In normal use, you should also pay attention to one point.

Remove ventilation at regular intervals and clean regularly. It is generally placed on the ground and placed against the wall, and the contact time with the ground and the wall is long. Due to the bulky size of mattresses, many people do not have the habit of ventilating and drying mattresses.

Many tatami mats are integrated and cannot be opened. Human sweat and dander can get inside the tatami mat and cause moisture. It will mold and rot for a long time, and it will also breed a large number of bacteria, mites and other pests and diseases, which will seriously affect people's health.

Be sure to wipe it with a dry rag, and also open the window for ventilation to reduce the humidity in the room and open the window. Usually, you must pay attention to the dryness and cleanliness of the home, be sure to pay attention to waterproofing, and then do it when you do it to breathe, and dry it every once in a while, but never let the sun shine directly.

Be sure to pay attention to ventilation, the moldy parts must be treated, and waxing needs to be carried out, so that the tatami mats can be effectively avoided from mold.

If such a situation occurs, it is likely that the ventilation in the home is not strong, and the home is relatively humid, which will lead to such a situation, and it is necessary to open more windows for ventilation.

If the tatami mat is moldy, you first need to put it in a large basin and soak it in laundry detergent and water; Secondly, carefully scrub the area where the tatami mat feels mildewy with a shoe brush; Third, the cleaned tatami mats can be reused by drying them in the sun.

If the tatami mat is moldy, it needs to be cleaned and disinfected in the sun before it can be used.

If your tatami mats have not changed, it means that your home needs to be ventilated, because it is not ventilated, so your bed grows black hair everywhere, so more ventilation and sunning, the sunlight will improve.

The bottom of the cushion is more wet, the latex paint mattress is heavier, and it is also very troublesome to turn it over, what is the better way to solve the dampness, in the rainy season, the tatami mattress may be damp. After a long time, it will emit a damp smell, so our domestic tatami mostly refers to a kind of customized furniture, which is closer to the kang in shape, closer to the bed in height and size, and has a relatively large storage space, and can also integrate other functions such as bookcases. Most of the customized tatami mats use composite panels or low-end bamboo mats, which have relatively high hardness and gaps, which can be placed in the middle of the mattress and tatami mats to play an isolation role, which increases the ventilation function.

Generally, tatami mattresses are placed directly on the floor or floor tiles. Therefore, the water vapor emitted by a person sleeping at night cannot be emitted after passing through the mattress, and mold will form after a long time. In order to avoid this phenomenon, it is recommended to put another one under the mattress that is the size of the tatami mat, and the first thing may be that their tatami mat structure and material are not right.

If the floor is not made of a box, the ventilation will be very poor, it is best to use moisture-proof composite wood boards, it is recommended to use pine finger joints, healthy and environmentally friendly, and have a long life. Tatami is customized Hollywood, my home is the 4th floor of the staircase, the bottom of the tatami mat is installed to do moisture-proof treatment, at present, the bottom of the latex mattress has moisture every day, the second is that the mattress must choose a better breathable style. Now that you've bought a latex mattress, if conditions allow, you can lay an eco-friendly brown mattress underneath.

It is recommended to strengthen the internal thermal insulation, especially the Northeast friends who live on the first floor and the top floor, but also pay attention to thermal insulation, you can use dynamic thermal insulation wall panels to install on the wall, to prevent the wall from being cold because of the cold, and the indoor temperature gap and the formation of ice condensation on the surface of your house The temperature is low, the main reason is that the wall on the back of your cabinet is too thin, it is estimated that it is the wall on the north side. It's cold outside, the walls are frozen, and the problem inside the house is not too high, and the water vapor will form water droplets.

Because you can't let the tatami mats get wet, if they get wet, they will become moldy, and we should always wipe the tatami mats clean, so that's fine.

There is no ventilation treatment.

This is also a small detail that is more critical, many people's tatami mats are directly used in the whole version, which is not conducive to the discharge of moisture inside, which will make the cabinet moldy and insecta, and the erosion of the wood will be relatively large, and it is easy to deform. Therefore, air holes are generally installed on the top layer of the board.

The tatami mat is mainly not breathable to wrap this inside, which leads to mold, and you can make a few more holes in the bed board when making tatami mats, which can be ventilated.

Tatami mats should be placed close to the window, do not let the tatami mats get wet, and put the tatami mats away in time after mopping the floor.

Be sure to open more windows for more ventilation, and be sure to let the sun shine on the tatami mats. This prevents the tatami mat from becoming moldy.

1. Tatami mats should not be fully sealed, reserved ventilation holes, tatami mats are in direct contact with the ground, the moisture is larger, and it is easy to return to the sedan car by the tide of the gods.

2. When the tatami mats are placed against the wall, one side of the outer wall must be leaked and waterproofed, otherwise the moisture of the outer wall is easy to cause tatami insects and mold.

3. Keep the room as dry as possible, and open the tatami mats regularly for ventilation and drying.

1. It can be cleaned and removed with acetic acid. Acetic acid has a strong decomposition effect and can remove Aspergillus flavus on tatami mats.

2. When the tatami mat is moldy due to moisture, you can prepare a basin of water in advance, put appropriate vinegar in the water, and then carry out multi-faceted mixing, stir evenly, and then put a dry rag into the water to carry out soaking, the time is about 5 to 10 minutes, and then remove the rag, wring out the water, and remove the moldy location. After cleaning up completely, it is necessary to open all the windows and doors to allow the gas in the room to circulate, and wait for the tatami mats to dry thoroughly before using them, so that the tatami mats can be treated with moisture and mold.

If you buy a Japanese tatami mat at home, be sure to pay attention to how to maintain it. Some sofas are susceptible to moisture and mold, but this phenomenon can be prevented as long as there are ventilation holes. If the tatami mat is moldy, you can choose to open the window to let in the air, or you can buy a dehumidifier for the home.

In any case, these things should be taken care of regularly, and the tatami mats can be erected, and they should be placed by the window to blow the wind frequently. Do not choose to wipe it with a wet towel when it is moldy, as this will make the mold more serious. <>

If there is a mat on the tatami mat, it should be ventilated and dried frequently. It is also possible that the tatami mats are not breathable well, resulting in the appearance of insects. If there is no one living in the house, it can also be caused by tatami mats being left empty for a long time.

In normal times, you should put the tatami mats in the window and open the window to blow the air, so that the tatami mats can be very dry. After the tatami mat became moldy, many people were more anxious, thinking about whether to replace it again? This will cost you a lot more money, so you must move the tatami mats to the sun to dry and dry all the mold on them.

Tatami mats should also be cleaned with a dry cloth as much as possible when cleaning. When it rains, tatami mats should also be kept dry and should not be placed by the window, as it is easy to get wet and mildew. If you want to wipe it with something, you can choose white vinegar and warm water, and then wipe it slowly, so that it is not easy for the tatami mat to become moldy.

The tatami mats must be carefully cleaned with a vacuum cleaner every week, and then the wet areas are dried with a hair dryer in time. Tatami mats should be ventilated and sunburned frequently, so that they can be maintained and will not make the tatami appear moldy. When there are tatami mats at home, you should also pay attention to mopping the floor, the ground is often wet, and it is easy for the tatami mats to become moldy.

The maintenance method is to choose to wipe it with a dry rag, or you can cover the cloth cover on it, or you can put it in a cool environment, close the doors and windows in the room, and if there is mold, you should put it under the sun.

The way to maintain it is that it can be cleaned regularly, it can be cleaned with a vacuum cleaner, it can be wiped, it can be cleaned with some detergent, and it can also be applied with some wood wax oil. You can use the grinding method to polish the moldy area, and then open the window to ventilate and dry.

It should be wiped clean with a rag first, and then properly ventilated, and also pay attention to cleaning, and pay attention to follow-up maintenance. After being damp, the mold should be removed immediately, and then it should be properly dried.

The tatami mats are damp and may be due to the fact that it is raining and the windows are not closed, so you can treat it with something specially handled.

After installing tatami mats, the tatami mat space may not be breathable, which will cause the floor to get wet, so you should leave a vent when you play the tatami mats.

If the waterproofing is not done well, when making tatami mats, the waterproofing of the bottom plate should be done well, otherwise the moisture from the floor will enter the tatami mat and adsorb on the mat. It is not breathable, and many owners do not make ventilation holes when customizing the tatami mat because of the storage in the lower layer, resulting in the moisture has entered the tatami mat, and it cannot be dissipated, and it can only become more and more humid.

1. Before installing tatami mats, the floor should be treated with moisture. Paint the floor with moisture-proof paint, and make an air vapor barrier under the tatami floor. 2. Lay a moisture-proof mat.

Because tatami mats are generally made of rush, which is very absorbent, it is best to add another layer of moisture-proof mat underneath. 3. Daily cleaning. Tatami mats are made up of pure natural grass products, and in the spring and summer seasons when the air is relatively humid, you need to pay attention to maintenance, wipe the mat surface frequently, and keep it clean and dry.

As long as it is to be ventilated. Make an effort to keep it dry. Wait for the tatami mats to dry and then wipe the mold.