What to do if the tatami mat is moldy, and properly deal with the moldy tatami mat

If there is mold on the tatami mat, we should deal with it in time to avoid bacterial growth and affect health. Here are some ways to properly deal with mold on tatami mats:

Clean the tatami surface: Use a damp cloth or vacuum cleaner to clean the tatami surface to remove dust and dirt thoroughly.

Remove the tatami mats: If mold has grown into the tatami mats, then the entire tatami mats need to be removed for treatment.

Disinfect with bleach: Use bleach with a concentration of no more than 5% mixed with water and spray on moldy areas. Wait a few minutes before wiping it clean with a damp cloth.

Moisture-proof measures: To prevent the tatami mat from becoming moldy again, you can take moisture-proof measures, such as laying moisture-proof mats on the tatami mats or ventilating them regularly.

Pay attention to environmental hygiene: keep the house dry, ventilated and hygienic, and avoid dampness and mildew of furniture.

In conclusion, timely cleaning and disinfection is the key to dealing with mold on tatami mats. If the situation is severe, the entire tatami mat needs to be dismantled for thorough cleaning and disinfection.

If the tatami mat is moldy, you first need to put it in a large basin and soak it in laundry detergent and water; Secondly, carefully scrub the area where the tatami mat feels mildewy with a shoe brush; Third, the cleaned tatami mats can be reused by drying them in the sun.

If the tatami mat is moldy, it needs to be cleaned and disinfected in the sun before it can be used.

If your tatami mats have not changed, it means that your home needs to be ventilated, because it is not ventilated, so your bed grows black hair everywhere, so more ventilation and sunning, the sunlight will improve.

The bottom of the cushion is more wet, the latex paint mattress is heavier, and it is also very troublesome to turn it over, what is the better way to solve the dampness, in the rainy season, the tatami mattress may be damp. After a long time, it will emit a damp smell, so our domestic tatami mostly refers to a kind of customized furniture, which is closer to the kang in shape, closer to the bed in height and size, and has a relatively large storage space, and can also integrate other functions such as bookcases. Most of the customized tatami mats use composite panels or low-end bamboo mats, which have relatively high hardness and gaps, which can be placed in the middle of the mattress and tatami mats to play an isolation role, which increases the ventilation function.

Generally, tatami mattresses are placed directly on the floor or floor tiles. Therefore, the water vapor emitted by a person sleeping at night cannot be emitted after passing through the mattress, and mold will form after a long time. In order to avoid this phenomenon, it is recommended to put another one under the mattress that is the size of the tatami mat, and the first thing may be that their tatami mat structure and material are not right.

If the floor is not made of a box, the ventilation will be very poor, it is best to use moisture-proof composite wood boards, it is recommended to use pine finger joints, healthy and environmentally friendly, and have a long life. Tatami is customized Hollywood, my home is the 4th floor of the staircase, the bottom of the tatami mat is installed to do moisture-proof treatment, at present, the bottom of the latex mattress has moisture every day, the second is that the mattress must choose a better breathable style. Now that you've bought a latex mattress, if conditions allow, you can lay an eco-friendly brown mattress underneath.

It is recommended to strengthen the internal thermal insulation, especially the Northeast friends who live on the first floor and the top floor, but also pay attention to thermal insulation, you can use dynamic thermal insulation wall panels to install on the wall, to prevent the wall from being cold because of the cold, and the indoor temperature gap and the formation of ice condensation on the surface of your house The temperature is low, the main reason is that the wall on the back of your cabinet is too thin, it is estimated that it is the wall on the north side. It's cold outside, the walls are frozen, and the problem inside the house is not too high, and the water vapor will form water droplets.

Because you can't let the tatami mats get wet, if they get wet, they will become moldy, and we should always wipe the tatami mats clean, so that's fine.

There is no ventilation treatment.

This is also a small detail that is more critical, many people's tatami mats are directly used in the whole version, which is not conducive to the discharge of moisture inside, which will make the cabinet moldy and insecta, and the erosion of the wood will be relatively large, and it is easy to deform. Therefore, air holes are generally installed on the top layer of the board.

The tatami mat is mainly not breathable to wrap this inside, which leads to mold, and you can make a few more holes in the bed board when making tatami mats, which can be ventilated.

Tatami mats should be placed close to the window, do not let the tatami mats get wet, and put the tatami mats away in time after mopping the floor.

Be sure to open more windows for more ventilation, and be sure to let the sun shine on the tatami mats. This prevents the tatami mat from becoming moldy.

Tatami mats occupy a relatively small area, but when it comes to daily maintenance, many people say "itchy teeth". Because the material of tatami mats is different from ordinary furniture, there will be many differences in maintenance. Tatami mats must be wiped with a dry cloth before use, not with water; Bending or pulling hard is prone to creases or deformation, which is not allowed; Rubbing with diluted vinegar can avoid yellowing and discoloration of tatami mats.

Make sure to vacuum carefully at least once a week to protect against insects and mold; In addition, tatami mats should be stored in a ventilated and cool place and should be exposed to sunlight for one hour every six months. If there are water and urine stains, wipe them with a hot towel; After washing the ink stain with milk, dry it with a hair dryer or in the sun on your back. During the rainy season, tatami mats need to be wiped daily with a dry cloth.

It has been rainy and wet for several days. Pay attention to turn on the air conditioner for dehumidification; Keep it dry and ventilated when the sun is shining.

If there is mold, clean the mold with a dry cloth dipped in dilute acetic acid; The yellowing of tatami mats does not affect normal use; When exposed to sunlight, both sides should be taken into account. After the rainy season, there is a lot of humidity indoors. You can open the windows for ventilation or use a dehumidifier to reduce the humidity in the room and avoid the tatami mats from getting damp and moldy; If the weather is good, you can take the mat to a dry and ventilated place and let it dry naturally without direct sunlight.

Many users enjoy the convenience that tatami mats bring, but there is nothing they can do about it. They don't know how to cope. Don't worry now.

If the tatami mat is moldy, you can refer to the above method to maintain it. As for moldy tatami mats, it's best not to pay attention to it until it gets moldy. In normal use, you should also pay attention to one point.

Remove ventilation at regular intervals and clean regularly. It is generally placed on the ground and placed against the wall, and the contact time with the ground and the wall is long. Due to the bulky size of mattresses, many people do not have the habit of ventilating and drying mattresses.

Many tatami mats are integrated and cannot be opened. Human sweat and dander can get inside the tatami mat and cause moisture. It will mold and rot for a long time, and it will also breed a large number of bacteria, mites and other pests and diseases, which will seriously affect people's health.

Be sure to wipe it with a dry rag, and also open the window for ventilation to reduce the humidity in the room and open the window. Usually, you must pay attention to the dryness and cleanliness of the home, be sure to pay attention to waterproofing, and then do it when you do it to breathe, and dry it every once in a while, but never let the sun shine directly.

Be sure to pay attention to ventilation, the moldy parts must be treated, and waxing needs to be carried out, so that the tatami mats can be effectively avoided from mold.

If such a situation occurs, it is likely that the ventilation in the home is not strong, and the home is relatively humid, which will lead to such a situation, and it is necessary to open more windows for ventilation.

1. Tatami mats should not be fully sealed, reserved ventilation holes, tatami mats are in direct contact with the ground, the moisture is larger, and it is easy to return to the sedan car by the tide of the gods.

2. When the tatami mats are placed against the wall, one side of the outer wall must be leaked and waterproofed, otherwise the moisture of the outer wall is easy to cause tatami insects and mold.

3. Keep the room as dry as possible, and open the tatami mats regularly for ventilation and drying.

1. It can be cleaned and removed with acetic acid. Acetic acid has a strong decomposition effect and can remove Aspergillus flavus on tatami mats.

2. When the tatami mat is moldy due to moisture, you can prepare a basin of water in advance, put appropriate vinegar in the water, and then carry out multi-faceted mixing, stir evenly, and then put a dry rag into the water to carry out soaking, the time is about 5 to 10 minutes, and then remove the rag, wring out the water, and remove the moldy location. After cleaning up completely, it is necessary to open all the windows and doors to allow the gas in the room to circulate, and wait for the tatami mats to dry thoroughly before using them, so that the tatami mats can be treated with moisture and mold.

1. When the weather is good, open the windows for ventilation and keep the room dry.

2. Place quicklime or desiccant indoors to effectively absorb moisture, or you can also buy dehumidifying appliances to remove excess water vapor in the room.

3. When the tatami mat is placed, there is a certain distance from the ground to the stool stall to be buried roughly, so that it is in a ventilated state, or the tatami mat is made under the platform to make an empty moisture-proof layer, which can effectively prevent the tatami mat from being too wet.

One of the important materials of tatami mats is wood, if the weather is bad, the wood is easy to get damp and moldy, and the tatami mat is close to the ground, so the chance of damp and moldy is greater. After the tatami mat is moldy, not only the smell is unpleasant, but also seriously affects the beauty of the family, and the tatami mat is generally placed in our bedroom, if the tatami mat has a very serious odor, it will also affect our daily rest.

How to deal with moldy tatami floors:

Once the tatami floor is moldy, we have to deal with it in time, take out the meiboss mold remover, spray the mold place, the mold remover should be all wetted until the mold is wet, the mold can be sprayed lightly once it can be effective, the mold is heavier, you can take an increase in the number of treatments, until the mold is completely clear. The treated surface is ventilated and naturally dry and watery, do not scrub with a damp cloth or water.

As long as it is to be ventilated. Make an effort to keep it dry. Wait for the tatami mats to dry and then wipe the mold.