What do you need to pay attention to in floor renovation and what methods are there for floor renova

1. The renovation period takes 4 days The floor renovation is divided into five steps: grinding, scraping putty, coloring, painting, waxing and polishing. When sanding, the grinder should use 40 mesh, 80 mesh and 120 mesh sandpaper in turn (the larger the mesh, the smaller the sandpaper particles, the less obvious the scratches left by the sanding) three times, and then scrape putty to level the floor, and then paint or tone the floor. Since the texture of the surface layer of solid wood is natural, it is impossible to change the color of the décor, and only the depth of the color of the floor can be adjusted.

Everything in the house should be removed before renovation to ensure that the house is clean and dust-free when painting. Floors generally need to be primed once and topcoat twice. If there are still defects on the surface of the sanded floor, it is necessary to brush the primer several times according to the situation.

The first paint is completely dry before the next paint can be brushed. Therefore, it generally takes 4 days to renovate the floor. In terms of construction technology, the primer and topcoat are now mostly made of environmentally friendly UV light-curing paint from famous paint brands, which do not contain harmful solvents, and consumers do not need to worry about the environmentally friendly renovation of the floor.

2. The thickness of the surface layer needs to reach 4 mm Floor renovation is to restore the old floor to new by grinding, scraping putty, painting, waxing and polishing the surface of the floor. Compared with buying a new floor, the old flooring adapts to the indoor environment and has better stability; The cost of renovation is also much cheaper. Laminate flooring cannot be refurbished.

Only hardwood flooring, parquet flooring and bamboo flooring with a surface thickness of 4 mm can be renovated. Because the surface layer of the floor will be polished off 1-2 mm after several times of polishing, if the surface layer of the floor is too thin, the middle layer will be polished, which will affect the service life of the floor, so it is necessary to ensure that the surface thickness of the floor is greater than 4 mm. Consumers can find out the surface thickness of their flooring from the seller.

Third, the local renovation effect is not good damage, mildew and deformation may not be able to be renovated. Floor mildew generally penetrates deep into the interior of the floor, and there will still be mildew spots on the surface of the floor after polishing; Deformation and damage to the floor cannot be remedied by sanding. If only a small part of the floor is damaged, mildewed and deformed, it can be replaced with the same color floor.

If you don't have a floor in the same color, you can choose a floor of a similar color and mix and distress it to minimize color differences. If most of the flooring has been damaged, or has mildew or deformation, it is recommended to purchase a new one.

Precautions for floor renovation.

1. Laminate flooring cannot be renovated;

2. Damaged wooden floors and corroded wooden floors cannot be renovated;

3. The wear-resistant layer is less than 4 mm and cannot be refurbished;

There are the following methods for floor tile renovation:

1. Recolor.

After a long period of wind, sun and rain, the tiles are easy to fade and crack.

If you do not want to crush the heavy floor and resurface it at this time, it is recommended to color and beautify the tiles with a special enamel paint to restore the shine and smoothness of the tiles of the past.

2. Paste the adhesive sticker.

Whether it's online or in stores, they're going to ** this kind of floor sticker. Its operation is also relatively simple, just stick it on the tile, not only to cover the tile, but also to add a lot of life to the room thanks to its colorful patterns.

3. Lay new tiles.

If you don't want to get rid of the old tiles, you can also use some special decorative products to directly glue the new tiles to the old tiles such as adhesives.

Renovating a floor requires five steps: grinding, sanding, painting, painting, and polishing wax. The grinding should be sanded three times with an order of 40, 80, 20 mesh sandpaper, then putty scraped on the floor, and then paint on the floor again. Since the surface of the planks is natural, only the color of the floor can be adjusted.

It is necessary to empty all the items in the house to decorate and ensure that the house is clean and tidy. The floor needs to be primed twice. If the floor is defective or needs to be polished, you need to apply more primer.

When the paint is dry, it's time to move on to the next step. So it takes four days to finish the floor decoration.

If the floor is renovated, it can improve the decoration effect of the room, but the decoration will lead to the difference between the old and the new, and the larger the size of the floor, the greater the color difference.

Moldy, deformed, and damaged floors cannot be renovated. Moldy flooring will corrode deep layers, and there will be mildew spots on the surface of the floor after polishing; If only a small part is damaged, moldy and deformed, the floor of the same color can be replaced. If the damage to the floor is extensive, you have to buy a new one.

Solid Wood Floor Renovation Steps:

1. Before the renovation of the old floor, ensure the cleanliness of the house and remove all the items in the house.

2. Polishe off the original surface of the floor by 1-2 mm.

3. Then scrape putty, color, paint, wax and polish. We should pay special attention to the step of painting, generally brush the primer once, twice the topcoat, and brush the primer several times when there are defects on the surface of the floor.

Notes on the renovation of solid wood flooring:

1. It should be noted that not all floors can be renovated, only solid wood floors, parquet floors and bamboo floors with a thickness of 4 mm or more on the surface of the floor can be renovated. The initial grinding will wear off 1-2 mm, too thin flooring is easy to polish out the middle layer, affecting the life of the floor, so before renovation, go to the seller to understand the surface thickness of your own floor.

2. If the color on the solid wood composite parquet block is not the soaked color but the surface coloring, or the colored wood bark layer is relatively thin, it will destroy the parquet effect after polishing, and it is recommended not to renovate.

3. If it is a laminate floor, it cannot be renovated, because there is a layer of aluminum oxide wear-resistant layer on the surface, and the renovation will destroy its wear-resistant layer and aggravate the aging of the floor.

4. If the floor has been damaged, mildewed or deformed, it is generally difficult to renovate and remedy the more serious situation.

5. In order to ensure the quality of floor renovation, please ask a more professional renovation company or cleaning company to be responsible for this project.

Generally, there are several steps in the renovation of sports wood flooring.

1. Use a trolley to remove the sports equipment on the wooden floor of the gymnasium.

2. Remove the string tape, logo and other attachments on the surface of the sports wood floor.

3. Use a professional refurbishment machine to polish and smooth, and the grinding thickness depends on the degree of wear and tear of the floor.

4. Use putty powder to smooth and fill the floor.

5. Wait until the putty powder is dry, and then use fine sandpaper to further polish the sports wood floor.

6. Mix putty powder and floor powder into putty with the same color as the floor.

7. Use a polishing machine to polish the sports wood floor, and use a vacuum cleaner to clean the floor.

8. Wait until the paint is dry before oiling and waxing the floor.

9. Paint, mark and draw logo for sports wood flooring according to customer requirements

Remove the old flooring and replace it with a new one.

1. On-site preparation.

Before the renovation of the wooden floor of the basketball court, it is necessary to clean up the wooden floor of the renovated basketball court. According to the situation of the construction site, remove the construction obstacles or stickers on the surface of the wooden floor.

2. Rough grinding.

First, use professional grinding tools to rough polish the wooden floor of the basketball court; After the rough grinding is completed, the belt grinder is used for medium and fine grinding; Use a corner grinder to do corner grinding on the corner area.

Wooden floors in the basketball hall.

3. Grinding and caulking.

After the wooden floor of the basketball court is sanded, some small gaps will appear. A mixture of putty and wood powder can be used for caulking.

4. Polishing. After the wooden floor of the basketball court is polished three times in coarse, medium and fine, the floor is polished again by using a polishing machine and sandnet abrasive.

5. Polishing the floor and cleaning.

After the grinding and polishing steps of the basketball court wooden floor are completed, the basketball court wooden floor is completely cleaned by using the vacuum cleaner Kaijie floor cleaning system.

6. Polishing and lacquering.

In addition to cleaning the wooden floor of the basketball court after polishing, you can use environmentally friendly water-based paint, paint the wooden floor panel of the basketball court, apply more than two sports primers, and ventilate and dry for 12 hours.

7. Underlining and logo

After the basketball court wood floor is polished and renovated, the next step is to mark the basketball court wood floor and draw the logo.

The renovation of the floor is the grinding of the surface of the floor. Then there's putty, or paint, waxing, and polishing, etc., which will make the old floor look like new. Compared with replacing the new floor, the cost of floor renovation is low, and after the old floor is used for a long time, the wood performance becomes stable, and the environmental protection is much better than that of new flooring.

There are two ways to renovate old floors, one is to renovate the floor directly at home by the construction worker, and the other is to remove the floor, then refurbish it by the manufacturer, and then send it back for installation. It takes 8-10 days to decorate directly at home, and it takes about 10-15 days to take the floor to the factory for decoration after demolition. This method is relatively common, but the dust and noise pollution during the construction process is serious.

The second method of renovation is better, but correspondingly more cumbersome and more expensive.

There is no set time frame for how long after the installation of the floor needs to be refurbished. Some floors, even if they are used for ten years, have no major problems and do not need to be renovated if they are carefully maintained every day. However, if some floors are not well maintained, there will be various problems such as paint loss and cracking after a few years, so it is necessary to renovate as soon as possible, because if it is not handled well, the damage will become more and more serious.

Laugh. <> floor renovation is divided into five steps: sanding, putty, coloring, lacquering, and waxing and polishing. When grinding, the grinder should use 40 mesh, 80 mesh, and 120 mesh sandpaper in turn to polish three times (the larger the mesh, the smaller the sandpaper particles, and the less obvious the scratches left by the grinding), and then scrape putty to level the floor, and then paint or color the floor.

Because the texture of the surface layer of solid wood is natural, the color cannot be changed, and the color of the floor can only be adjusted. Everything in the house should be removed before renovation to ensure that the interior of the house is clean and dust-free when it is painted.

In general, flooring requires one primer and two coats. If there are any defects in the polished floor surface, you need to brush the primer several times depending on the situation. You can't apply the next coat of paint until it's completely dry.

Therefore, it usually takes 8-10 days to renovate the floor. In terms of construction technology, most of the current primers and topcoats use UV light-curing coatings from well-known paint brands, which do not contain harmful solvents, and consumers do not have to worry about whether the floor renovation is environmentally friendly.

When renovating the floor, it is necessary to pay attention to the fact that it can not have a serious impact on the noisy waterproof layer below, and the correct way and method should be adopted, the process steps should be correct, and the floor should be properly polished in the process of renovation.

It should be noted that the floor must be flattened, and the potatoes must be stuffy and must be laid on the floor with some sand and mud pants, and then to lay the floor, when the old floor is repaired, all the old floors must be bent off and replaced with new floors, and waterproof treatment must be done.

When the floor is renovated, you need to pay attention to moving the furniture to other places, try to use big brands of floor paint, when you need to wait for the first time to brush the second time, and then brush the second time after drying, you need to choose a more environmentally friendly Ground Forest Cave Plate Paint This and dry.

1. Observe the paint surface.

What is the damage to the paint of sports wood flooring? If it is too severe, it is not recommended to renovate.

2. Floor thickness.

The sports wood floor grinding and renovation project is to polish first and then renovate. If the sports wood floor is too thin, there is no condition for sanding.

3. The degree of scratches.

What is the degree of scratches on the surface of sports wood flooring? If it is only a scratch, it can be sanded and refurbished, but if the scratch is very deep, it is not recommended to sand.

4. Serious warping.

If the sports wood floor is seriously damp and the arch curls occur, it can no longer be polished and renovated.

5. It's been a long time since I used it.

How has the sports wood floor been used for more than ten years, or even decades, and there is no need to polish and renovate, just replace the new sports floor.

1. Refurbishment:

1. Use a large-scale floor renovation machine to polish and remove the paint layer, surface layer, and wood layer for about a millimeter, and then carefully sanding to make the floor surface delicate and smooth to a new state. The corners of the floor are sanded with a small angle grinder to achieve an overall smooth effect.

2. Remove the original transparent putty on the side seams, reseal the joints, and then seal the entire floor with primer and wait to dry.

3. After the primer is dry, brush the topcoat for the first time and let it dry.

4. Carefully grind the surface layer with more than 300 mesh gauze until the surface layer is slightly rough, remove the powder crumbs, and brush the second layer coat.

5. Brush the topcoat three to four times according to the above procedures, and the last one does not need to be grinded.

6. Wait for the last topcoat to dry and then apply floor wax.

2. Waxing: The surface of the solid wood (plastic) floor is coated with protective wax, which isolates air, water and dust after curing, which is easy to clean and prevent wear, so as to prolong the service life and play a role in anti-slip and anti-static; Waxed by professionals, the wax liquid is evenly distributed, the thickness is moderate, and it is bright and beautiful.

3. Wood floor polish:

Spray a layer of polish evenly on the surface of the solid wood floor or composite floor, and then polish it several times with steel wool, the effect is very obvious, which is not only beautiful and beautiful, but also can deal with slight scratches and can play an anti-slip and anti-static role.