How to maintain the wooden floor after renovation, how to care for and maintain the wooden floor ren

Hardwood flooring. as ground.

A common variety of materials, there is a lot of knowledge in the use of materials. Hardwood flooring.

Different from other floors, it needs to be renovated and maintained after a period of use, and the mesh needs to be renovated and repaired.

Tip: Depending on the frequency of use, the wooden floor should be renovated every 5 years.

Experts tip that many wooden floors look old after many years of use, and many people may want to remove the floor and replace it with a new floor. From an economic point of view, this is not a fair decision. Since the wooden floor is only ground on the surface, the wood is still good wood, especially after many years of use, the wooden floor has become very messy, the new wood floor is not as good as the old floor in this regard, and the renovation is only the floor with 1 to 2 mm of surface sanded, which is much cheaper than buying a new floor.

In fact, it is not difficult to renovate the old solid wood floor, which is generally divided into the following six steps:

1. Before the renovation of the old floor, ensure the cleanliness of the house and remove all the items in the house.

2. Use a large floor renovation machine to polish and remove about 1-2 mm of paint layer, surface layer and wood layer several times, and then carefully sanding to make the floor surface delicate and smooth to a new state. Use a small angle grinder for the corners of the floor.

Sanding is carried out to achieve an overall smooth effect.

3. Then scrape putty, color, paint, wax and polish. We should pay special attention to the step of painting, generally brush the primer once, twice the topcoat, and brush the primer several times when there are defects on the surface of the floor.

4. Carefully grind with water sandpaper, grind the surface layer until it is slightly rough, and remove the powder.

5. Brush the topcoat three to four times according to the above procedures, and the last one does not need to be grinded.

6. Wait for the last topcoat to dry and then apply floor wax.

Points to note for the renovation of hardwood flooring.

1. Ordinary solid wood flooring and three-layer solid wood parquet.

Most of the surface thickness of the products is about 4 mm, so they are generally suitable for refurbishment.

2. Laminate flooring.

There is a layer of aluminum oxide wear-resistant layer on the surface, and renovating the floor will destroy its wear-resistant layer and aggravate the aging of the floor.

3. The thickness of the surface layer of the multi-layer solid wood floor is different, and the thickness of the thin skin is generally about millimeters.

4. If the old floor is deformed, cracked, and mildew, it is difficult to repair it to its original appearance even if it is renovated, and it is generally necessary to replace the new wooden floor with a new one.

The company is responsible, and it is best to ask professional supervisors to supervise the construction.

What to pay attention to in the renovation of wooden floors.

1. If you want to renovate the solid wood floor at home, it is best to ask a more professional renovation manufacturer or cleaning company to do it, so as to ensure the renovation quality of the solid wood floor.

2. At the same time, not all floors can be renovated, only floors with a surface thickness greater than or equal to 4mm can. Since the floor is sanded during the renovation, it is usually 1-2 mm to be polished, and if the floor is thin, it is easy to polish the middle layer, which will affect the service life of the floor.

3. It is not recommended to do partial renovation, and the effect is very unsightly. In addition, if the wood floor is damaged, mildewed and deformed, it cannot be renovated.

Not all wood floors can be refurbished, only if the surface thickness of the wood floor is more than 4 mm. When the wooden floor is renovated, it will be sanded off 1-2 mm, and the surface layer of some floors is too thin, which is easy to polish out the middle layer, which affects the life of the floor. Therefore, before renovating the old floor, it is important to understand its surface thickness.

Like old hardwood flooring, parquet and bamboo flooring can generally be refurbished, laminate flooring is not suitable for renovation.

Timber Floor Renovation Steps:

1. First find a professional floor turning machine to polish several times, remove the paint layer, surface layer, and wood layer about millimeters, so that the floor surface is delicate and smooth to reach a new state, and the corners of the floor are polished with a small sander to achieve the overall smooth effect.

2 Reseal the original seams, and then seal the whole floor with primer and let it dry.

3 When the base coat is dry, brush the top coat for the first time and let it dry.

4 Carefully sand the surface with sandpaper, grind the surface to roughness, and remove the powder from the surface.

5 Follow the procedure above to brush the topcoat three to four times, and the last one does not have to grind.

6. Wait for the last topcoat to dry and then apply floor wax.

It is recommended that when you renovate the old floor, you must first master the professional renovation method to avoid poor renovation results. Is wood floor renovation expensive? Wood floor renovation** is in accordance with the grade and steps of wood floor renovation.

The cheap ** is around a few dozen dollars; Expensive wooden floors renovated at a few hundred dollars a square.

Wood flooring is a common ground decoration material, which has the advantages of natural beauty and good texture, and many families choose to use it as ground decoration. However, wooden floors need to be cared for and maintained after renovation, and here are some ways to do it:

1.Cleaning and maintenance: Mop the floor at least once a week, and avoid using acid, alkaline detergents or soapy water to clean the floor to avoid damaging the floor surface. It is recommended to use detergents and cleaning utensils that are specifically designed to clean the floor.

2.Avoid moisture: Wood floors are prone to deformation and mold in a damp environment, so care needs to be taken to avoid moisture. The humidity in the room can be controlled by adjusting the humidity of the room and placing moisture absorbers.

3.Protection from direct sunlight: Sunlight can cause the discoloration of wooden floors, it is recommended to install blackout curtains or blinds on windows to control direct sunlight on the ground.

4.Anti-scratch: Avoid using sharp hard objects to scratch the ground, such as when the furniture is moved, it is best to put the furniture on a protective pad before moving.

5.Regular maintenance: Regular maintenance such as waxing and polishing of the wooden floor can protect the surface of the floor and prolong the service life.

Summary: Wood flooring is a relatively high-end decoration material that requires close to nature, and it takes a certain amount of energy and time to maintain and maintain. But only in this way can the service life and aesthetics of the wooden floor be truly guaranteed.

The house needs to be renovated after living for a long time, because there are many places that are broken, especially the floor, if it is a wooden floor, it is more likely to break, so there is a renovation of the wooden floor, and there are many people who don't know what to do, so howRenovation of wooden floorsThis? What are the precautions for the renovation of wood floors? Next, let's introduce it to everyone's bezoars.

1. How to renovate wood floors.

1.There are two ways to renovate the old floor, one is to renovate the floor directly at home by the construction worker, and the other is to remove the floor, then the manufacturer to renovate it, and then send it back for installation. It takes 8-10 days to renovate directly at home, and about 10-15 days to remove the floor and take it to the factory for renovation.

One practice is more common, but the dust and noise pollution are more serious during the construction process. The second method is more effective, but it is also more cumbersome and more expensive.

Ordinary oil-based paint, water-based floor paint, floor oil. Ordinary paint** but the shelf life is not long, and the performance is not too stable, the effect is not very good, the cost of a good oily floor paint is 15 20 yuan; Water-based floor paint is good, relatively safe and environmentally friendly, formaldehyde emission is relatively small, is the main type of paint used in modern home decoration, but ** is two or three times that of oil-based floor paint; The floor oil is transparent, environmentally friendly, and this kind of ** is about 20-30 yuan.

Second, the main points of wood floor renovation.

1.If you want to renovate the solid wood floor, you must see what kind of problems exist in the original solid wood floor. Whether it is a scratch on the surface, a local protrusion, or a local cracking.

Only by figuring out the defects of the floor can the problem be dealt with in time. Use sandpaper to sand the surface of the floor first, first coarse sandpaper, then fine sandpaper, ultra-fine sandpaper. Polishing the surface of the floor to a smooth finish, as it was when you first bought it.

Then it is necessary to re-apply the protective layer to the wooden floor. Putty, glue, paint, wax. After finishing, when the floor is dry, use fine sandpaper to sand away the unsmooth areas.

2.The surface layer needs to be up to 4 mm thick, and the floor renovation is to restore the old floor to new condition by sanding, scraping putty, painting, waxing and polishing the surface of the floor. Compared with buying a new floor, the old flooring adapts to the indoor environment and has better stability; The renovation cost is also a lot.

Laminate flooring cannot be refurbished. Only hardwood flooring, parquet flooring and bamboo flooring with a surface thickness of 4 mm can be renovated. Because the surface layer of the floor will be polished off 1-2 mm after several times of polishing, if the surface layer of the floor is too thin, the middle layer will be polished, affecting the service life of the floor, so the surface thickness of the floor must be more than 4 mm without nuclear collapse.

Consumers can learn from the seller about the thickness of the surface layer of their own round floor.

If you want to decorate the old house, it will involve the renovation of the floor, for which we generally do not understand, so what are the precautions for the renovation and renovation of the wooden floor, through the above introduction, we also understand these.

Nowadays, many people will install solid wood flooring at home, which is made of natural wood, which has a good decorative effect and excellent foot feel, and is deeply loved by everyone. However, the solid wood floor will become old after permanent, and it will slowly age, and many people will renovate the solid wood floorHardwood flooring refurbishedSteps for the renovation of hardwood floors

1. Sand the floor.

Before the renovation of the solid wood floor, we first need to polish the floor, and we can use a large floor renovation machine to polish or remove the painted surface of the floor, at least about 1 to 2 mm of the surface need to be sanded. It should be noted that we can also use 40 mesh, 80 mesh and 120 mesh sandpaper of different thicknesses to polish the solid wood floor 3 times, the larger the mesh, the smaller the sandpaper particles, the less obvious the grinding marks, after sanding, to ensure that the surface of the solid wood floor becomes smooth and delicate.

2. Scrape putty.

After the solid wood floor is sanded, you need to scrape and apply putty to the solid wood floor to make the floor smooth, it is best to use a special transparent primer putty with the floor paint, and after scraping the floor, you need to wait for it to dry.

3. Brush primer and toning treatment.

After scraping the putty, the next step is to prime and tint the floor. Because the surface texture of the solid wood floor is natural, it is not possible to change its color, only the serious depth of the floor.

4. Brush the top coat.

After waiting for the primer to dry, we will brush it with a topcoat, and after it has dried, we will rub the floor with sandpaper to grind the surface of the solid wood floor to a little rough, then remove the dust, and then apply the second coat.

5. Waxing, polishing and curing.

Finally, after the topcoat has dried, a special waxing equipment is used to wax and polish the solid wood floor.

How to maintain solid wood flooring

1. We can use a vacuum cleaner to remove the dust on the solid wood floor, and then wet the wrung out rag or mop to clean the surface of the solid wood floor.

2. We need to wax the solid wood floor from time to time, before the floor wax is dry, it is best not to walk on the floor, usually the floor waxes after waiting for about 20 minutes to 1 hour, it is best to wax the solid wood floor every six months, which can keep the floor beautiful for a long time.

Steps and how to maintain the introduction of solid wood flooring, I hope to be able to help you a family, we usually need to maintain and clean the solid wood floor, in order to make its service life longer.

If the surface of the wood floor is too thin to be refurbished. In addition to non-solid wood floors that are not suitable for decoration, some wood floors with a surface thickness of too thin and less than 4mm are also not suitable for decoration. Because when decorating, the floor needs to be sanded off 1-2mm.

If the floor is too thin, the middle layer will be easily smoothed and the service life of the floor will be shortened. The wooden floor was too badly damaged to be refurbished. If the floor is badly damaged, moldy or deformed, the decoration cannot change the damage of the floor, and it is not suitable for decoration.

There is more than one way to renovate wooden floors, and you should choose according to your own situation. The most basic principle is that the method chosen will not affect the renovation progress and will not waste money.

Solid wood floors should be cleaned regularly, cleaned and vacuumed regularly, and the surface of the floor should be scratched due to dust accumulation or friction. To get fools into the indoor floor, you can put a doormat outside the door. When cleaning the floor, wipe the floor with a wrung out mop and do not mop the floor with dripping water or a mop containing corrosive detergents.

Waxing the hardwood floor regularly, usually twice a year, can not only protect the surface of the hardwood floor from external stains, but also prolong the life of the floor. Before waxing the floor, clean the floor, then spread the floor wax evenly on the surface of the floor, and then wipe it with a soft cloth when the wax is dry.

To prevent damage, do not wear shoes with nails, rough, heavy, hard objects when walking on a solid wood floor, and do not place them directly on the solid wood floor to prevent scratches. If this happens, it should be fixed in time. Keep the interior dry, the solid wood floor is exposed to humid air for a long time, and the water stains and natural resins contained in the floor itself are gradually lost.

In the long run, the life of the floor will be shortened a lot. So keep the room dry and keep it moderate.

Before the decoration of wooden floors, many wooden floors have serious surface scratches and cracks, which need to be treated before decoration. During the decoration process, the floor should be sanded with coarse sand first, and then sanded with fine sand. Grinding should be done one by one in all four directions.

The shape of the grinding machine is large, and it cannot deal with the corners, so it needs a special corner grinder for grinding; The overall polished floor should be flat, and if there are uneven places, it needs to be sanded continuously.