Which is better, headlight refurbished uv or smoked?

Car headlights. Compared with the polishing and refurbishment method and fumigation repair, of course, fumigation repair is good.

Polished refurbishment method, this refurbishment method is relatively common, and it is generally available in car beauty shops. In fact, the principle is to polish the car lamp with sandpaper, and then use special wax to polish it. This method has obvious results, but it is not thrown everywhere, which is a disadvantage.

Grinding is polishing, and the protective film is also polished off......The key was not repaired, and then half a year later, the lights were developed again and turned yellow and paste.

Fumigation repair renovation method, does the name sound lofty? In fact, it's just a matter of putting on a new layer of protective film. But it feels really good after the restoration.

First of all, the masters have to put a seal on the edge of the headlights, then use sandpaper of different thicknesses to polish one by one, and finally use professional tools to get the protective film on, and the cost of repairing a set of headlights is not too expensive.

Which is better, headlight refurbishment neo or Xun, I think headlight refurbishment anyway: better, and its quality will be better, and its style is more fashionable, so you can match one of these headlights according to your model, I think it's still very good.

Headlight refurbishment UV is still better. Headlamp fumigation repair is a method of liquefaction and instantaneous solidification of the surface of the headlamp by means of a special gas. This kind of repair is particularly damaging to the headlight itself, and it will not reach the original light transmittance after repair, and this repair is difficult to guarantee for a long time.

Large-scale refurbished oil and lavender are also good, this should be smoked better, the smell of smoke can be absorbed and more delicious.

Wait for peace of mind, which one should I choose? If the headlights are renovated, why take this they also have their own characteristics and advantages. Delete your own, and wait for your own to do it.

Why is it better to smoke headlights for refurbishment? I think it's better to have a refurbishment of the headlights.

Actually, they are all very good, and if I had to choose one, I think the first one is better.

Generally speaking, the headlights are better, and the UC of the front headlights is better, compared.

The headlight renovation must be better, after all, the new accessories are replaced.

But he found out which of the yo v core is better, and I think everyone finds that the right position is better, because it's because it's very strong to tell you that its benefits don't need to be there.

It's better, because the latter doesn't have money for this thing, and this is just the case.

In fact, both of these effects are similar.

Why is it better to smoke headlights for refurbishment? I think the headlights are better refurbished.

Which is better, headlight refurbished UV or Xun? Which do you prefer?

Summary. Hello dear, I am happy to answer for you There is a big difference between the headlight UV varnish and the ordinary varnish. Headlight UV varnish is mainly a special transparent coating, which can form a layer of high transparency and high hardness protective film on the surface of the headlamp, improving the durability and corrosion resistance of the headlight.

This particular coating has the following characteristics:1UV resistant:

It can prevent the corrosion and oxidation of the headlight surface by ultraviolet rays. 2.High hardness:

It can effectively prevent small particles such as stones from scratching the surface of the headlamp and prevent surface scratches. 3.Anti-pollution:

It can prevent contaminants such as grease and stains attached to the surface of the headlights from endangering the quality of the headlights. 4.Doesn't fade:

It will not cause the color to fade or fade due to the influence of sunlight for a long time. In short, the headlight UV varnish can improve the light quality of the headlight, and at the same time, it can also effectively protect the surface of the headlight, making the headlight have a longer, brighter and more beautiful life.

Hello dear, I am happy to answer for you There is a big difference between the headlight UV varnish and the ordinary varnish. Headlight UV varnish is mainly a special transparent coating, which can form a layer of highly transparent and high-hardness protective film on the surface of the headlamp to improve the durability and corrosion resistance of the headlamp. This particular coating has the following features:

1.Ultraviolet resistance: It can prevent the corrosion and oxidation of the surface of the headlight by ultraviolet rays.

2.High hardness: It can effectively prevent small particles such as stones from scratching the surface of the headlamp and prevent surface scratches.

3.Anti-pollution: It can prevent pollutants such as grease and stains attached to the surface of the headlights from endangering the quality of the headlights.

4.No fading: It will not cause the color to fade and fade due to the influence of sunlight for a long time.

In short, the headlight UV varnish can improve the light quality of the headlight, and at the same time, it can also effectively protect the surface of the headlight, making the life of the headlight longer, brighter and more beautiful.

The difference between headlight UV varnish and general lacquer is mainly in the following aspects:1Different uses:

Headlight UV varnish is a protective coating that is specially used on the surface of headlights, while general lacquer is usually used for spraying other parts. 2.The composition of the materials is different:

Headlight UV varnish is a kind of polymer organic matter, which is a transparent coating with special functions; In general, organic solvent-based paints are often used. 3.The protection of objects is different:

Headlight UV varnish is a protective coating tailored for the special item of headlights, which can resist various erosions of headlights from the outside world; The general paint only provides a layer of paint film, which can protect the surface of the sprayed object from a certain degree of crack friction and external erosion, but its protection effect may not be as professional and complete as the headlight UV varnish. To sum up, although the headlight UV varnish and the general lacquer are both coatings, there are great differences in the scope of the object and use, and the protective nature of the items.