The volume of the microphone in the computer sound options cannot be adjusted

No sound issues with the computer:

First, first confirm that the hardware is fine. If the speaker is fine, the sound card is fine, and if you've tested it on other machines and it's really good, then you can read on.

2. Make sure all the cables are exactly right. Then power on the speaker and turn on the volume switch.

3. Install the driver of the sound card correctly, if it is an onboard sound card, it is best to install the driver provided on the driver disk of the motherboard.

In fact, the computer does not make a sound, and many times it is because the sound card is not driven correctly. In general, after the sound card driver is installed, there will be a small speaker icon in the taskbar in the lower right corner. ）

Fourth, if you are sure that the driver is installed correctly, then take a look at the volume settings in the computer.

The specific method is to double-click the speaker icon in the taskbar, and check whether the volume is turned off to the minimum in the "Volume Control" and "Waveform" dialog box in the pop-up "Volume Control" and "Waveform".

If these two options are not available in the dialog box, click on the "Options" menu - select "Properties" - select "Volume Control" and "Waveform" in the "Show Volume Controls" and then set them correctly.

Note: Step 4 can only be set up after the driver for the sound card has been installed correctly.

Isn't it right to install the sound card driver?,The gray and white display is that there is no driver loaded.,Go to ** Super Rabbit.,Install it with the hardware driver angel inside.,Absolutely correct and tried.,Or upgrade the onboard sound card.,That's it.,Good luck brother!!

1. First, right-click the sound icon in the lower right corner and click on the recording device.

2. After entering the sound interface, click on the microphone, and then click on the properties at the bottom right.

3. Make sure that the device usage is enabled.

4. Click on the level above to set the microphone sound to the maximum, and increase the microphone strengthening.

5. Next, click Advanced, replace the original frequency, click Apply and then click OK.

If your computer's microphone doesn't show up or the microphone enhancement function doesn't work, you can try the following methods:1Check the audio device:

First of all, you need to check whether your computer has successfully recognized the microphone, you can find the "Sound" option in the "Control Panel" of your computer to see if the microphone is recognized. If the microphone is already recognized, you can try adjusting the volume of the microphone to the maximum and test the recording. 2.

Update or reinstall drivers: If your computer has successfully recognized your microphone but isn't working properly, there may be a problem with your microphone's driver. You can try updating or reinstalling the microphone's drivers to fix the issue.

3.Check your microphone settings: If you've successfully identified your microphone and installed the correct drivers, but it's still not working, you can try checking your microphone settings in your audio settings.

You can find the "Sound" option in the "Control Panel" of your computer, and in the "Recording" tab, find your microphone, and then select the "Properties" tab to see if the microphone is set up correctly. 4.Check the app settings for messy programs:

If your microphone doesn't work properly in some specific apps, it may be because there is a problem with the app's microphone settings. You can try to check if the microphone is set correctly in the app's settings. If none of the above methods can solve the problem, it is recommended that you contact the computer manufacturer or professional technician for consultation and repair.

The setting method of computer headset microphone without sound is actually relatively simple, and the specific method is as follows:

1. First open the control panel and click "Hardware and Sound";

2. Then click "Manage Audio Devices" and turn it on;

3. Then click on the "Record" option and turn it on;

4. After finding "Microphone", click to open;

5. Finally, click the "Enable" button, so that you can successfully solve the problem of no sound in the computer headset.

There are a variety of reasons why the microphone has no sound, and the specific ones are as follows:

1. The microphone interface is not plugged in.

Some microphones and headphones are one-piece, and it is generally necessary to make sure that the microphone plug is inserted into the correct socket.

2. The microphone hardware is broken.

If you have an extra microphone, you can replace the microphone to see if the microphone hardware is broken.

3. Software setting problems.

Some people have no sound when using QQ voice, in fact, it is also possible that the microphone in the QQ window is set to mute. Just click on the red box in the picture below to cancel the mute.