-
I just encountered this problem yesterday, and I couldn't do it step by step according to the router instructions, and finally solved it like this.
Troubleshoot connectivity issues first;
Then you need to make sure that the local link is set to the same network segment as the router, that is, set the local IP to be the same segment as the default IP of the router (which is also on the router label) according to the router instructions;
But this still can't enter the router management interface (such as: http, you can enter and run cmd ping, if the ping can't get through, you can ipconfig all to view the ip address of the local network card (I don't know if it's called that, anyway, it's not the ip address, for example: something), if you can't ping when connected to the router, you can just install modem to ping this ip, and then ping This IP (ping, ping, ping, then ping.
Then you can enter the router management interface (http
That's how I solved it. FYI.
-
Give it a try while making sure there are no issues with the line connection.
-
Set up. Check whether DHCP is enabled on the router
Whether the Local Connectivity settings for desktops and laptops are working.
-
First, the router is set up to surf the Internet, and second, the IP address of each computer is generally OK
-
ASUS RT-G31 Infinity Router Reset Method:
Method 1: There is a button [RESET] button on the back of the router, press and hold for 5 seconds, and the indicator light on the router panel will be off and then on, which means that the settings have been reset.
Method 2: Enter the router.
Open the browser - enter the general router address is this or check the login information on the back of the router) enter the route - enter the user name, password, (the default is generally admin).
Click on System Tools --- factory reset.
-
As long as the router should have a resit reset button, most of them are small holes, poke the small hole of resit with a mobile phone pen or thin stick, and you can enter it into the login interface. There are also a few routers that are used on the login screen.
-
Press the reset button of reset with a toothpick and operate it in the power-on state. You need to keep pressing it for about 30 seconds. Anyway, it doesn't matter if you press for a long time. You didn't succeed in resetting because you didn't have enough time to press.
-
ip: If you don't change the username, it is admin, and the password is admin, note that it is lowercase.
-
Hello, ASUS IP: Username: ADSL Password: ADSL1234 Have a nice day.
-
Generally, routers are set up on the interface. To go wireless, your computer must have a wireless network card. If you don't have it, you can't do it, if you have a wireless network card.
-
Is there no wireless signal in the routing or what?
Wireless router has a wireless signal turned on, and you should be able to turn it on through the cable.
-
**The method also tells you, open** see the word "general" on the right hand, please select the product you will choose (wireless network) Please select the series (ap routre) Please select the model (RT-G31) and then click on the green search. After clicking, you will appear to select the operating system,XP will be selected XP,Vista and Win7 select Vista,Most of these machines are selected 32-bit。 Enter the user manual, and click on the user manual to see the ** page.
Detailed enough, I hope it can help you,
Tell us about my experience. It's kind of an earthwork.
Go to the route, set up the wizard, and go to the step below. >>>More
TP-Link is not particularly understood, I saw a friend who bought it, and it was basically fine in the morning, and you have to compare this with a specific model. I use 360,360In fact, the essence is still made by Leike,It's just added to the powerful software technology of 360,And configured a routing guard software and mobile phone app for the router,You can remotely control routing,And add a lot of functions,Such as signal control,Internet time control,Routing anti-black and other more humanized functions,In addition, its appearance is really good,It is indeed very thin and beautiful,The ability to penetrate the wall is also very good。
Yes, the router can only be used as a hub, don't use the WAN port, just plug it into other ports. Also, the router cannot be configured with DHCP, otherwise it may cause IP address conflicts. In other words, the router doesn't need to be equipped with anything, just use it as a hub.
First, let's talk about the advantages first:
1. The appearance is good, but the black is out of stock. >>>More