How about the Huawei A1 router, how about the Huawei router A1

First, let's talk about the advantages first:

1. The appearance is good, but the black is out of stock.

2. Gigabit WAN network port, cascading the upper gigabit switch, can play the role of gigabit wireless, and the disk array network access speed is significantly improved. This is the key indicator I chose, for example, Q1 is a lack of heart eyes, and a 100 megabit WAN network port.

3. The indicator light can be turned off.

4. The LAN network ports are all gigabit, and there are two.

5. The free network cable is good.

Second, let's talk about the shortcomings.

1. Wonderful, I don't know how much this cost can be saved. You must know that the possibility of ordinary players buying Huawei A1 will not be high, **link a lot of high-quality and inexpensive products.

2. The wireless can't reach Gigabit, in the 5G state, the mobile phone is supported by mate8, less than 50cm away from the router, and there is a screenshot below.

3. Router plug-in storage access is stuck, **plug-in storage** actually has to be buffered, and the lag is obvious, which is very strange. Unlike Gigabit networks and, it is better to have direct access to the Internet**.

4. Unable to set MAC address binding to restrict access to illegal devices (such as password leakage). Didn't find the set point, trouble to know under the guidance.

Addendum: The setting has been found, "Wi-Fi Access Control".

5. Compared with the **Link WDR 6300 two years ago, there is no advantage in the ability to penetrate walls. I don't know if it's a limit on signal strength.

Others still need to be explored, and overall it's not bad, **slightly expensive.

Advantages of Huawei router A1: Sojube.

1. High appearance;

2. Gigabit WAN network port, cascading the upper gigabit switch, can play the role of gigabit wireless, and the disk array network access speed is significantly improved.

3. The indicator light can be turned off.

4. The LAN network ports are all gigabit, and there are two.

5. Complimentary network cable;

Disadvantages: 1. Data line interface bit interface;

2. The wireless cannot reach the world's talk about dismantling gigabit, and in the 5G state, it is less than 50 meters away from the router, and the network speed is poor;

4. Unable to set MAC address binding to restrict access to illegal devices (such as password leakage).

5. Poor ability to penetrate walls, which limits the signal strength;

6. **More expensive than the same cost-effective road service excitation device.

Advantages of Huawei Router A1:

1. High appearance;

2. Gigabit WAN network port, cascading the upper gigabit switch, can play the role of gigabit wireless, and the disk array network access speed is significantly improved.

3. The indicator light can be turned off.

4. The LAN network ports are all gigabit, and there are two.

5. Complimentary network cable;

Disadvantages: 1. Data line interface bit interface;

2. The wireless cannot reach Gigabit, and in the 5G state, it is less than 50 meters away from the router, and the network speed is poor;

4. Unable to set MAC address binding to restrict access to illegal devices (such as password leakage).

5. Poor ability to penetrate walls, which limits the signal strength;

6. **More expensive than routers with the same cost performance.

1. Obtain the VLANID and value first. First open Control Panel - Programs and Features - Turn Windows Features on or Off - "Telnet Server" and "Telnet Client" to confirm that it is open, then open Start Menu - Run - cmd.

2. First of all, you need to specify the IP in the local connection, IP address: from OK), the subnet mask will be automatically generated: , default gateway: this is the default address of Huawei HG8245). The following DNS server addresses do not need to be filled, they are left blank.

3. Log in to hg8245, that is, enter in the address bar, press enter! The user name is telecomadmin, the password is admintelecom, and Chinese is selected. Attention, don't enter the username and password given behind the Huawei routing modem, that's a chicken rib!

4. Set HG8245. On the left side of the homepage there is a tree-like list. Select the third item lan--> LAN port working mode, and check lan1, lan2, lan3, lan4 on the right!

Click "Application"If you have opened IPTV, remember to leave a port, and you can't watch TV if you tick it all!

5. Then go to the DHCP service configuration to enable the DHCP function, otherwise after completing the setting, you will find that you still have to manually set the IP to access the Internet

6. Select the second item WAN in the tree list, and click WAN configuration below. Click the tick on the blank checkbox in front of the connection name, and then there is a gray "delete" in the upper right corner, don't you want me to say it. However, it is important to note that it is used

If you have a **, keep it and build a new one, otherwise you will find that your ** cannot be used after you set it up.

7. WAN connection: check the "Enable" checkbox in front of the service list: select the "Internet" connection mode

Route VLANID: * (the value just noted down is used) :* the method of obtaining the IP address

pppoenat: Enable checkbox with the username: **Password:

8. Turn on wireless wifi

9. Save the settings. Select "System Tools" - Configuration Files in the left tree list, and the first one on the right: Save Configuration.

10. Restore all the things you just set for the local connection to be automatically obtained. At this point, the route setup is complete.

Summary. No, the wifi standard supported by Huawei router A1 is IEEE.

No, the wifi standard supported by Huawei router A1 is IEEE.

Excuse me, but please go into more detail?

Huawei Lu Xiaochen A1 is not WiFi6, it is a router that supports WiFi5. There can be many reasons for wifi problems, such as improper router settings, insufficient signal coverage, complex network environment, etc. The solutions to wifi problems are:

1.Check the settings of the router to make sure that the settings of the router are correct, such as the encryption method of WiFi, SSID, etc. 2.

Check the signal coverage of your router to make sure that your router's coverage is sufficient, you can try changing the location of your router, or add a wifi extender. 3.Check your network environment to make sure it's not too cluttered, such as too many Wi-Fi signals nearby, or too many devices connected to your router.

Personal Tips:1Try to use the latest WiFi technology, such as WiFi6, to improve the stability and speed of the network.

2.Try to use the latest router, such as one that supports WiFi6, to improve the stability and speed of the network. 3.

Using the latest security technology, such as WPA3, can improve the security of your network.

Summary. No, the Huawei Router A1 does not support WiFi 6, it is a router that supports WiFi 5 (standard. WiFi 6, also known as the IEEE standard, is one of the latest wireless networking technology standards available, and it is faster, more stable, and better than WiFi 5 when multiple devices are connected at the same time.

If you need to upgrade to WiFi 6 technology, you can consider buying a new generation of Huawei WiFi 6 routers, such as Huawei WiFi AX3 Pro, etc.

No, the Huawei router A1 does not support WiFi 6, it is a router that supports WiFi 5 (standard. WiFi 6, also known as the IEEE standard, is one of the latest wireless networking technology standards, which is faster, more stable, and better than WiFi 5, and performs better when connecting multiple devices to Doosan Backup. If you need to upgrade to WiFi 6 technology, you can consider purchasing a new generation of Huawei WiFi 6 routers, such as Huawei WiFi AX3 Pro, etc.

Can you elaborate on that a little bit more?

Today, wireless network technology is constantly evolving and upgrading. WiFi 6, also known as the IEEE standard, is one of the newest standards in its arsenal. It has made a lot of improvements over the WiFi 5 standard, providing a faster, more stable connection, especially when multiple devices are connected at the same time.

The following describes how to set up the Huawei router A1:

1. First, connect the line between the router, the broadband modem and the computer.

2. After the line is connected, open the browser and enter the management address and management password of the router, and then enter the router background (the login address and login password of the specific router can refer to the manual or the label on the back of the router).

3. After logging in to the background, select Quick Settings, enter the password applied for from the network service provider, and go directly to the next step after the input is completed.

4. Set the wifi password, try to make the alphanumeric combination more complicated, and do not allow the number of spring travelers to be easily rubbed off the network.

Zhenwei 5. After the input is completed, confirm the first click, and then restart the router to take effect.

The Honor Router Pro normal version is exactly the same as the game version, and in terms of configuration, it is equipped with HiSilicon dual-core 1GHz processor, 256MB memory, 128MB flash memory, high-performance dual-band balun antenna, 2 signal amplifiers, 2 5G signal amplifiers, and 2 high-gain low-noise figure receivers built into 5G respectively.

HUAWEI A1 Enjoy Edition:

1) One-click pairing: After the configuration of the Huawei main router that supports the smart connection feature is completed, the smart network with it as the core can be built. If the Wi-Fi device that supports the Smart Connection feature is close to the Huawei router and powered on, the Huawei router will detect the Wi-Fi device with the Hi light and flash orange automatically.

At this time, press the HI button, the HI light will turn into orange flashing, and the "Zhilian - One-key Pairing" function will be activated. Wait patiently for the Hi light to turn on, indicating that the new Wi-Fi device has joined the Zhilian network.

2) WPS: When the Hi light is always on, within two minutes, press the Hi button and the WPS button of other Wi-Fi devices in turn to start the standard WPS negotiation and connect the Wi-Fi device to the routed Wi-Fi network. After extinguishing, release to restore factory settings.

The A1 is a normal one, and the A1 Enjoy version is a dual-band wireless router.

A1 is better, the port is full gigabit, and the bandwidth within 300M is not a big problem, A1 Imagination is the priority port of 100 megabits, and it can only support up to 100M broadband. In general, it is not good, and it is not recommended to buy.