How do I use the inner red dot scope? How to adjust the red dot scope

In fact, the design function of the inner red dot sight shooting is to respond quickly at close range, it does not require extremely high accuracy when using, as long as the eye and the gun are in a horizontal straight line, then the target entering the territory has a very high probability of hitting, although it has only a small red dot in the mirror, but it can basically meet any combat environment, you imagine if you fight in a very poor light environment, only rely on the front sight and the ruler to aim at 3 points and a line, it will be many times slower than using the inner red dot.

I'm wondering if your mirror has parallax. The focus of the mirror does not coincide with the light source, resulting in the target image and the light point not being on the same optical plane.

For example, if the hands of a clock and the dial scale are not on the same plane, and we swing our heads, their relative relationship changes, which is parallax. We need to find a way to make the two as close as possible, and the solution is to take them apart and adjust the position of the light source, but this is too difficult for the technical conditions of the home.

If you can't find someone to repair it, this mirror will be considered to be a tuition fee.

The scope is attached to the gun when it is practical. Before use, the gun is to be calibrated, and after calibration, it is just that the red dot in the field of view is aimed at the target, and it is accurate no matter how you look at it.

1.Attach the red gear collapse point to the gun and tighten the mounting screws to ensure its stability; 2.Turn on the red dot sight, adjust the battery, adjust the brightness and darkness of the red dot; Brother Envy 3

adjust the brightness of the red dot; 4.Aim at the target, adjust the position of the scope so that the red dot hits the target accurately; 5.Repeat until the red dot is accurately aimed at the target.

Summary. Hello, I am glad to answer for you, what light is used for the inner red dot sight The answer is as follows: the light source is very simple, LED bulbs can be, and generally red and green light are used alternately.

The light source is positioned about 60 mm away from the lens, but there are other sizes. If you don't know the location of the light source, you can only use the stupid method of "focusing" to try slowly, and in the process of moving your eyes, the red dot on the lens basically coincides with the target point, even if the focus is OK.

Hello, I'm glad to answer for you, what light is used for the inner red dot sight The answer is as follows: the light source is very simple, LED bulbs can, and generally red and green light are used alternately. The position of the light source is about 60 mm away from the lens, and of course there are other ulnar ridges that are not an inch.

If you don't know the location of the light source, you can only use the stupid method of "focusing" to try slowly, and in the process of moving your eyes, the red dot on the mirror Hongye difference basically coincides with the target point, even if the focus is OK.

Hello, those cross-shaped and triangular aiming patterns on the lenses are printed by Kai Menghe through the reticle, and the quiet school generally uses a hole in the metal sheet of a few tenths of a millimeter, so that the light reflects the pattern on the lens through the reticle. The processing of reticles requires high-precision instruments, such as laser engraving machines, so it is very difficult to make.

The holographic sight does not need to be close to the sight, and the eyepiece can be aimed, so as to have a more open aiming field of view, and can more quickly obtain information outside the field of view of the scope; The inner red dot meow does not emit directly, but is isolated by the lens on the path of the ejection and presented in the image on the back screen.

The principle of the holographic sight is that there is always a standard base point in the shooter's aiming sight, and its advantage is that it is extremely convenient to aim, so that the shooter can slow down in an instant to notice the aiming mark and the target at the same time, and can always maintain a clear line of sight, the shooter can grasp the target with a wide field of view in an instant and press the aiming mark on the target, and it is also very convenient to continue to press the aiming mark on the target when the ** recoil or the target moves quickly. When shooting, the shooter needs to focus his eyes on the target, and the aiming mark of the sight can easily form a line with the eyes and the target divide, and the image can be obtained in an instant, which is faster than the standard notched ruler aiming.

The second advantage is that it can be used even if the sight lens is partially damaged, and the notched gauge can be kept and fully utilized. When the holographic sight is turned off, the shooter can simply take a look through the glass window of the sight and use the notched ruler in the usual way, with the holographic sight not hindering the notched gauge's function.

The principle of the inner red dot sight is that the light does not shoot out directly, but on the path of the shot, isolated by the lens, and presented in the image on the back screen, the red dot is not on the target, but in the scope. Hope mine can help you, hopefully.

How do you draw a PUBG red dot scope? The red dot scope, also known as the reflective sight, is a kind of optical sight without magnification, which will not block too much of the field of vision after opening the scope, and is an auxiliary prop suitable for close focusing, and the method of drawing is as follows

1. First of all, we draw the top of the red dot sight, a box;

2. Draw the base horizontally downward;

3. Draw a rotation button for focusing on the base;

4. Then draw a rectangle downwards with grooves in the port;

5. Then draw the dry part of the detailed section, and draw small parts on both sides;

6. Finally, we will partially apply the shade, and the line under the hole will be completed.

Introduction to Red Dot Sight.

A red dot sight, also known as a reflex sight and an inner red dot, is a non-magnification optical sight with a bright aiming point (usually a red dot). Some telescopes and "point-and-shoot cameras" with built-in viewfinders also contain red dot lenses.

Because the light point (light ray) that hits the eye in the red dot lens is always balanced with the red dot lens, it can be accurately aimed through the red dot even if the eye is not on the central axis of the red dot lens, and it can improve the shooting accuracy when moving at high speed or shaking the body, so it is widely used by military firearms and even fighter planes (HUDs) (head-up displays). In addition, special light can be generated by LED lamps and can also be provided by natural light or very low-level radioactive radiation (semi-permanent).