What is the way out for the transformation of the mold industry now?

At present, the international economic situation is becoming increasingly complex, and China's manufacturing industry is beginning to face many challenges. At the same time, China attaches great importance to the strategic position of the manufacturing industry, and is committed to the development of high-end equipment manufacturing industry to enhance China's industrial competitiveness, so as to achieve a fundamental transformation from Made in China to Created in China.

During the 12th Five-Year Plan period, China will strive to cultivate the high-end equipment manufacturing industry as a pillar industry of the national economy, and then realize the transformation of China's equipment manufacturing industry from large to strong. By 2020, the sales output value of China's high-end equipment manufacturing industry will account for 30% of the sales output value of the entire equipment manufacturing industry.

The 4th China Manufacturing Forum recently focused on topics such as "independent innovation" and "high-end manufacturing and intelligent manufacturing". Su Bo, Vice Minister of the Ministry of Industry and Information Technology, stressed at the forum that the so-called innovation-driven is to vigorously strengthen independent innovation and improve core competitiveness. In the process of promoting the development of high-end equipment manufacturing industry in China, we will focus on solving the following three major problems:

First of all, it is necessary to strengthen and upgrade the capacity of the industrial base. He revealed that the life of many of China's mechanical basic parts is only one-third to two-thirds of similar foreign products, such as the world's first industrial competitiveness of China's power generation equipment manufacturing industry needs high-quality castings and forgings of eighty to ninety, accounting for a quarter of the investment in nuclear power equipment pumps and valves are still mainly dependent on imports, in addition to high-end numerical control systems more than ninety into five also rely on imports, China's equipment manufacturing industry in the quality of domestic equipment quality and short life problems can not be ignored. The second is to strengthen the organic combination of original innovation, integrated innovation and introduction, digestion, absorption and re-innovation.

Finally, attach great importance to market cultivation.

Zhou Jichang, chairman of China Communications Construction Group, said that from an international perspective, the deep impact of the financial crisis has caused the global economy to weaken. China's manufacturing industry is also facing deep pressure, the low-end industrial chain of the living space is also rapidly shrinking, the current Chinese manufacturing industry is standing at the crossroads of transformation and upgrading. Every economic crisis is often accompanied by a new round of scientific and technological revolution, which can drive the entire economy into a new period of prosperity.

He said that the sixth scientific and technological revolution is coming to us, which will be a good opportunity for China's manufacturing industry to move towards a high-end industrial chain.

Chen Jingwei, president of the Hong Kong Chinese Chamber of Commerce, believes that the country will continue to adhere to the strategic outline of "going out" in the "Twelfth Five-Year Plan", and at the same time, it is also particularly emphasized that the word "accelerate" has been added. By the end of 2011, Chinese enterprises had set up 10,000 outward direct investment enterprises in 178 countries and regions, achieving a total of US$322 billion in non-financial outward direct investment. It is conceivable that China's manufacturing industry has made a good start on the road to internationalization.

At present, although energy and natural resources still dominate China's foreign investment, China's manufacturing industry has begun to pay more attention to "going out", so as to seek new development, which is the inevitable choice of China's manufacturing industry to adapt to the development of economic globalization, and it is also the fundamental need to transform the mode of development.

I don't think there is any prospect anymore, the wage of making molds in Guangdong is very low, and there are more people making molds. However, the salary of the upper echelons is still okay. It is recommended that those who are just about to enter the industry, low education or don't enter, the development direction of mold making is towards unmanned and intelligent.

In less than ten years, artificial modeling will die, and it is a very painful choice to face transformation without high-quality people. Transformers made by hand 10 years ago rely on computer gongs today. When the computer gong ** comes down and the technology is mature, do the people who make the mold still have food!!

Mold has always been a high-tech and sophisticated thing, but it has become Chinese in China. In the same end, manual labor will eventually be replaced by machines. Think twice, comrades, and are you a talent?

Can you endure hardship? Can you hold on?

I don't know very well about opening a factory.

Now it is overcapacity, and because the mold is not a high-tech industry, many small bosses to join not only make the industry mixed, but also bring vicious competition

Now it is difficult to do mold orders, the unit price is low, and it is difficult to collect money, and if some small mold rooms similar to processing shops are eliminated in the future, the situation will be much better. There are four main parts to make molds: NC, fitter, design, and professional processing.

First of all, professional processing, that is, professional grinding machines or milling machines, etc., the work is busy, and it is not recommended to develop narrow in the later stage. NC NC operation machine is easier than professional processing, if you can transfer programming will be easier, but the mold NC processing volume is very large, work pressure and overtime more, in the whole industry programming income is relatively high, it is convenient to start a business. After accumulating a certain amount of contacts and experience, you can buy your own machine and start a business.

There are now two types of fitters, one is involved in the processing of molds, and they are very familiar with the structure of mold processing, because the contact surface is wider, and the later development can be transferred to engineering or design. But it is very difficult to change jobs, so you must be mentally prepared. The other type is almost no processing, basically only mold matching, because the parts are processed with high precision, and most of the molds are directly assembled.

This kind of is mainly large companies, such fitters jump nest is more difficult to develop potential than the previous type of fitters. The design is the initial station of the mold, and the level of design has a greater impact on the processing and fitter molding. Good design requires more than five years of accumulation.

Good design requires a good understanding of processing and molding, and also an understanding of plastic molding, and the mastery of mold structure is only the basic skill.

In Suzhou, all positions can reach more than 5,000 as long as they can block one side, but it is difficult for this industry to exceed 7,000. You have just graduated and have a far-sighted vision, not to be limited to the mold industry, if you can enter the development of a better industry is very good. At the same time, it is also necessary to find a company that can have development or be able to improve their ability to the company A few years after graduation is very important, time is also very fast, a few years later, some people are masters, some people are still teachers, in general, the mold industry can only support the family, if you want to make a fortune is difficult.

However, there are also some small bosses who start by making molds. Later, he accumulated contacts and funds to start a business. Stamping and automotive tooling are now recommended in the tooling industry, and these two have the most potential in the entire industry.

When you just graduated, you are always very confused At this time, when you choose to enter the industry, pay more attention to the industry you can enter, the development potential of each industry is different, the same effort may not get the same harvest, weigh the pros and cons and then determine your future path....

For today's society, the plastic mold industry is still a popular industry, plastic mold and hardware mold to compare, these two industries are more popular. Whether it is now or in the future, these two industries will not lag behind, only gradually move forward, I believe that taking this industry seriously, will be better on the road in the future.

Since the reform and opening up, due to the vigorous development of China's machinery, electronics, light industry, instrumentation, transportation and other industrial sectors, the demand for molds is increasing in quantity, the quality requirements are getting higher and higher, and the supply period is getting shorter and shorter. Therefore, the relevant departments of the state attach great importance to the mold manufacturing industry, list the mold as a key scientific research project, send people to study abroad, introduce foreign advanced technology, and formulate national specifications for molds. Through this series of measures, China's mold manufacturing industry has developed greatly.

According to the "Analysis Report on the Production and Marketing Demand and Transformation and Upgrading of China's Mold Manufacturing Industry" released by Qianzhan Network, there were 1,589 enterprises with a scale of more than 20 million yuan in China's mold manufacturing industry in 2011, with total assets of 100 million yuan, a year-on-year increase; Achieve sales revenue of 100 million yuan, a year-on-year increase; The total profit was 100 million yuan, a year-on-year increase. From January to September 2012, the mold industry achieved sales revenue of 100 million yuan, a year-on-year increase, and the total profit was 100 million yuan, a year-on-year increase of 100 million yuan.

In recent years, the application field of mold continues to expand, the domestic market, on the basis of traditional manufacturing industries such as service machinery and automobiles, electronic appliances, etc., with the adjustment of national industrial policy, aerospace, new energy, IT, medical machinery, high-speed railway and other industries have put forward higher requirements for the mold industry, and also provide new market opportunities for the mold industry.

At present, China is facing the dual pressure of the technological advantages of developed countries and the advantages of developing countries. With its technical advantages and strength, mold enterprises in industrially developed countries have a competitive advantage in high-end molds, and with their gradual entry into China, it has formed a huge challenge to China's mold industry; India, Thailand and some countries in Eastern Europe, in recent years, the mold industry has developed rapidly, and its mold also has a strong competitive advantage, the cost and advantage of China's mold industry will gradually weaken and eventually disappear.

The research group of the mold industry believes that China's mold enterprises must work hard in technology, management and personnel training, actively introduce foreign advanced mold manufacturing technology, enhance the development ability of high-end mold products, adjust the structure of mold products, and continuously improve the international competitiveness of China's mold products.

Overall, the prospects of China's mold industry are still very good, the future will be affected by 3D technology, the industry will be affected to a certain extent, but in the short term the scale of the industry is still growing.