-
Anonymous users2024-02-12Samsung's is more expensive.
2253BW 22-inch widescreen; Response: 2ms DVI+VGA Brightness: 300cd m2
Contrast: 8000:1, Resolution: 1680*1050,
2243ln "widescreen; Brightness: 300nits Contrast Ratio: 10000:1, Response Time: 5ms, Resolution: 1680 1050 Interface Type: D-Sub
2213ln "Widescreen Brightness: 300cd m2 Contrast ratio: 5000:1
Response time (typical) 5ms, interface type: D-Sub 16:10
Resolution: 1680 1050 Interface Type: T-Sub Interface Type: D-Sub Piano Lacquer" ￥
TPV (Maya) has a three-year warranty, and the quality is also good.
p228d 22"Widescreen DVI 5ms 10000:1 (Dynamic Maya Audio-Technica (Piano Black)
p223d 21．6"Widescreen DVI (with HDCP) 5ms 3000:1 (dynamic).
-
Anonymous users2024-02-11HP's should be good.
Hope that helps!
-
Anonymous users2024-02-10Common liquid crystal displays are divided into four types according to their physical structure:
1. Twisted nematic type: referred to as TN, the simple structure of TN liquid crystal display includes a polarizer in the vertical and horizontal directions, a directional film with fine grain grooves, a liquid crystal material and a conductive glass substrate. Widely used in entry-level and mid-range panels, it is not outstanding in performance indicators, cannot express 16.7m color, and the viewing angle has a natural problem;
2. Super twisted nematic: referred to as STN, the display principle is similar to TN. However, the liquid crystal molecule with the TN torsional nematic field effect rotates the incident light by 90 degrees, while the STN super-torsional nematic field effect rotates the incident light by 180 to 270 degrees.
3. Double-layer super-twisted nematic type: referred to as DSTN, DSTN is to scan the twisted nematic LCD screen by double scanning, so as to achieve the purpose of display. DSTN is developed from the super-twisted nematic display STN.
DSTN adopts dual scanning technology, and the display effect is greatly improved compared with STN.
4. Thin film transistor type: referred to as TFT, which is mainly composed of: fluorescent tube, light guide plate, polarizer plate, light filter plate, glass substrate, alignment film, liquid crystal material, thin mode transistor, etc.
To give you a comprehensive answer Take your time Monitor screen is an extremely common failure, there are many reasons, and the fault phenomena caused by different reasons are also different, and the solutions are also different. In the text mode, the screen is characterized by confusion of characters, and in the graphic mode, it usually appears as a graphic layer, and horizontal stripes are produced due to internal or external interference. The following are some thoughts and experiences that I hope can be used for your reference. >>>More
1.It is recommended to work in a normal temperature and humidity environment, as high temperature and humidity will affect the life of the LCD monitor. >>>More
The cathode rays of CRT are very harmful to the human eye, while liquid crystals are almost harmless. The radiation of the display regardless of CRT and LCD front is very low, mainly concentrated on the side and back. If you are doing CAD, you need to use liquid crystal if you don't have high requirements for color, and if you are doing renderings, use CRT with color
Since the data cables of the monitor have been replaced, it shouldn't be something else, you open the right mouse button properties screen saver, the power supply below, and see if it is not debugged well, if there is no problem, it means that there is a problem with your monitor.
Look at what they said, the AOC in the photo is just not willing to spend money? There are problems, TPV is the world's largest LCD manufacturer, the quality is also good, durable, AOC because the main market is in China, because of China's national conditions, it is a little lower than its Yimeixun. AOC's after-sales service can be said to be almost impossible for other display manufacturers. >>>More