Does the Lexmark E260DN have a copy function?

Lexmark has a copy function, and during the copying process, you can directly put the things that need to be copied into the device and press the copy button.

Of course, this copier has the function of copying, so in general, there is, as long as you want to copy it, put it in directly, and press the copy to copy.

This device doesn't have the function of copying.,You can take a look at its manual.,The above words are all detailed introduction.。

Does the 1260dn have a copy function? It doesn't have a copy function, so you can choose other functions, but the copy function you can go to the copy department to copy, I think it's also more convenient and simple, and it's not expensive.

Does this Limeng you are talking about have a copy function? Generally, if it is modern, there is software.

The device you are talking about, it can only print, not copy.

This model does not have a copy function.

This model does not have a copy function.

This should have a copy function.,And relatively speaking, this model is still very good.,The effect of use is also very good.。

In this case, there should be no copy function, only a print function, but you can add it.

Hello, no.

At the moment, this feature is not used.

Caution is required.

Does the 260dn have a copy function? I think the 126dn can have a copy function, which is very good.

Does Inner Mongolia have a copy function? I think there should be a copy function, and if you have a copy function, it's better to copy.

The paper jam and toner will be lit up when they run out.

There are more problems, restart and try.

Dear, don't you even read the manual?

Others are not necessarily, and the third one is obviously a "lack of paper" prompt.

It's best if you can see the picture, but this is the original picture of the manual

It is possible to set up one computer as a server and the other to share its printer while it is powered on.

To do this, add the network file sharing protocol to the printer in the Net Neighbor - Local Connection - properties on both computers.

On the computer that is doing the server, go to the printer and fax options on the control panel - right-click on the properties of the Calimark E260DN, there are sharing options in it, tick it off. This way, another computer can see your printer and print files in your online neighborhoods or in the printer options.

Please replace the power strip of the printer for testing, it may be due to the power strip failure caused by too high voltage... Hope it helps again!

Lexmark MRO - Huai'an Station 0517-80981999

2. As long as the machine starts to rotate, the final result is that all six lights are flashing (according to the instructions to send directly.) In particular, the direction of the line and whether the position of the sensor is obscured. .Follow the cartridge or chip ...Finished.

You can try it:

1. Shut down first.

2. Press the ready and dureturn keys to boot into zhidiagnostics mode and don't let go until the performing self test is displayed

3. Select maintenance count4 and select RESET to reset the count to zero.

5. Press the return key to return to diagnostics mode, and then hit the genus.

The printer returns to normal mode.

Try this machine and see if it can be solved.

Oh, I added powder, and I didn't change the chip

Yes .

Lexmark's laser machines have to change chips after adding powder. The number of chips counted is about 1500.

After adding powder, the chip must be replaced.