When mopping floors, what does adding water to make the floor cleaner?

In our daily life, cleaning is what we have to do every day, but when many people mop the floor, they will find that after mopping, it will quickly become dirty again, and it is easy to get dusty. <>

Twenty grams of baking soda are mixed with thirty milliliters of white vinegar and one liter of water, and then a small amount of dish soap is added to stir well, using it to wipe the floor can not only have a back effect, but also effectively remove stains from the floor. Salt water mopping can also achieve the effect of moisture-proof, first heat the water, and then wait until the water is not hot to the temperature to add a spoonful of salt, after the salt is fully dissolved, you can start mopping. <>

Sometimes, some people in order to prevent outdoor moisture from entering the home, the doors and windows are all in confinement, they think that as long as they are isolated from the outside world, they can prevent moisture, but the moisture contained in the air will seep into the room from some tiny gaps such as kitchens and bathrooms, so that the way of closing doors and windows not only does not play a role in moisture-proof, but also is very easy to breed bacteria. Therefore, it is best to open doors and windows for ventilation at noon or in the afternoon when there is the least moisture. <>

In the daily maintenance of the floor, cleaning is a very necessary item, the general stain can be treated with a soft dry rag, if you encounter a stain that must be cleaned with water, then it is best to use a soaked and wrung out and non-dripping rag to clean it. In addition, after the floor is wiped again, open the doors and windows to allow air circulation to dry the floor. Usually after mopping the ground, you should also clean up the mop, otherwise there will be a large number of bacteria due to the dirty mop, and if you mop the ground, it will increase the ground bacteria, which is very bad for the human body.

Clean the mop well, rinse it a few times, wring it clean, it can be disinfected with disinfectant when appropriate, dry it well, run more dry, try to get as little moisture as possible, and pay more attention to it can be avoided.

Some salad oil, salad oil can make some things dissolve better and stick together, which will make the floor very clean and make the floor look very shiny.

You can add a little soap or salt with toilet water and fabric softener, because they can play a good role in sterilization and disinfection, and can dissolve well and remove stains on the ground.

You can add baking soda or white vinegar, you can add salt, add warm water, and then completely dissolve the salt and mop the floor to achieve the effect of sterilization, and it dries relatively quickly.

Add soap to the water and a little ammonia and turpentine, and clean the tiles to make the tiles more shiny.

It is recommended to add salt, soapy water, dish soap, rice washing water and other items to mop the floor. Because salt has a cleaning effect, adding salt to water will dissolve when salt and grease come into contact, which can effectively remove oil from the ground.

Take a part of the soap and put it in hot water to dissolve, and then use the water to dissolve the soap to mop the floor, which not only has a decontamination effect on the ground, but also purifies the indoor air.

Adding a little dish soap and an appropriate amount of toilet water to the water will not only make the mopped floor cleaner and brighter, but also purify the indoor air.

Rice water can be used as a detergent, mopping the floor with rice washing water, not only to remove stains on the ground, but also to remove static electricity from the ground.

What is cleaner in the mopping water? When we clean the house, we generally mop the floor, of course, when mopping the floor, we must mop the floor clean, and the clean floor looks comfortable. Next, I will take you to understand in detail what is added to the mopping water and the relevant content of relatively clean.

1. Alcohol

Mopping with alcohol can make the ground cleaner. This is done by adding an appropriate amount of alcohol to the water. After that, soak the mop directly in water.

It can be used to mop the floor. This method not only makes the floor cleaner and more hygienic. It can also play a role in sterilization.

After preparing the tools, put the pig skin and water together in the pot to heat, boil the hot water in the pot and boil for 5 8 minutes to take it out, remove the warm pig skin with tweezers, and then use a kitchen knife to scrape all the oil stains on the pig skin.

2. Salt

Mopping the floor with table salt can also make the ground cleaner. After each mopping the floor. The ground often leaves some water stains.

And it takes a long time to dry. At this time, if you step on it, it is easy to stain the ground. It is advisable to mix some salt with warm water.

After that, sprinkle salt water on the ground. It allows the moisture from the ground to evaporate faster.

3. Fabric softener

For people who don't mop the floor often. You can also add a certain amount of fabric softener to the water during the mopping process. After stirring slightly.

Soak the mop in water again. Wring it out slightly and use it for mopping. Wait for the ground to dry.

The ground will not be easy to get dusty. As a result, the floor can be kept clean for a long time.

After preparing the tools, pour 2 3 of water into the basin, add 15 grams of salt, stir well, and use it to soak the Sanmen blue crab. If it is a small amount of Sanmen blue crab, you can soak it in a bucket, put a little water in the bucket and add a small amount of salt.

What is the cleanest thing to mop the floor

Mopping the floor with a flat mop is the cleanest.

Things on the floor are a headache to clean, and there are fine dust, dander, human hair, animal hair, futon flocculent things, etc., which are difficult to clean, and of course, all kinds of stains.

Mopping the floor to first clean up the fine dust, etc., and then deal with the stains, I personally think that the treatment of fine dust, my method can have a certain reference for everyone, as for the treatment of stains, I have nothing to say, I only talk about the treatment of fine dust.

When mopping the floor, if there is water on the ground, of course, most of the water, is mopped off by your mop, a small part of the water, it will slowly volatilize on the air and heat conduction, and there is no need to deal with it, if you want to mop it dry immediately, then you can use a dry mop and mop it again, so that you can.

How does the water on the ground change when mopping? It will slowly dry out and evaporate.

Yes, it is necessary to have a cotton mop with good water absorption.

1. Salt: Edible salt has a cleaning effect, if there is oil stains on the floor, we can pour salt into the oily place, and then drag it back and forth several times with a mop, when the salt and grease touch, it will dissolve, and the oil stain will be removed.

2. Milk: We often drink milk in life, and sometimes there is milk that we can't drink, and we don't lose much of what we don't drink and keep it for mopping the floor. Sprinkle a little milk before mopping the floor and mop the floor again after a while, and it will be very clean.

3. Soap: Soap is also a commonly used cleaning product in our lives, but many of us use it to take a bath and wash clothes. As everyone knows, it is also possible for flooring.

You can take a part of the soap and put it in hot water to dissolve, and then use the dissolved water to wet the mop and mop the floor, which not only has a decontamination effect, but also has a faint fragrance in the house.

4. Rice water: Rice water is a very common thing in our lives, and every household has it. But many people may not know that the water we usually use to wash rice can actually be used as a detergent.

When mopping the floor, you can directly wet the mop with rice washing water, and then mop the floor, which can not only remove floor stains but also remove static electricity.

5. Toilet water and dish soap: You can also add some dish soap and an appropriate amount of toilet water to the mopping water, which can make the mopped floor more clean and bright, and can exude a fragrance.

What to mop the floor and add to mop it clean? Add this to the water and mop the floor nicely, quickly and cleanly.

Add some dish soap or some disinfectant to the water, so that the mopping is still relatively clean.

First of all, you prepare the mop and wash the mop bucket, and then add water to the bucket, after pouring the water, you can add salt to the bucket, the purpose of adding salt is very simple, because salt can not only sterilize and disinfect, but also the ground of water dries faster.

After that, you add toilet water to the bucket, knowing that the function of toilet water is to prevent mosquitoes, in fact, it can also give fragrance to the room. After we add white vinegar to the bucket, there must be friends who know that white vinegar is sterilized and disinfected, in fact, it can also remove odors, and finally we only need to add a little conditioner to the bucket, there will definitely be friends who have doubts, why add conditioner in the water, because this conditioner is to prevent static electricity and dust on the ground, and finally you only need to use a mop to put it in the bucket and stir it evenly, after stirring evenly, you can go to mop the floor.

Mop the floor with "characteristic" water, you will find that the ground at home is extraordinarily easy to mop, and after you mop the floor, the home will be filled with the fragrance of toilet water, this fragrance can not only prevent mosquitoes, but also prevent dust from falling on the ground, this is because of the effect of conditioner, which is equivalent to adding a layer of protective film to the ground, so use this "characteristic" water to mop the ground, as long as you mop it once, the ground at home will be clean for 1 week!

Generally, a little dish soap or a small amount of laundry detergent is fine, and less is not easy to clean.

What to mop the floor and add to mop it clean? Add this to the water and mop the floor nicely, quickly and cleanly.

What to put in the mopping water to mop clean, some people's homes will be mopped every few days, when mopping the floor can add something to mop the floor will be very clean, I have sorted out for you what to put in the mopping water to mop the relevant information, let's take a look.

Mopping the floor can add some toilet water and alcohol, alcohol can sterilize and disinfect, and the flower water contains fragrance, and the house can be filled with fresh smell after mopping; You can also add some baking soda when mopping the floor, baking soda has a good cleaning and decontamination effect, and if there are stains on the ground that are difficult to clean, it can be easily removed.

When mopping the floor, you can also add some fabric softener used in laundry to the water of mopping the floor, which is cleaner and more translucent, and can also reduce the generation of static electricity and make the floor less prone to dust.