-
Anonymous users2024-02-12Solid wood furniture has been loved by many people because of its warmth and calmness, so how to renovate solid wood furniture? How to maintain solid wood furniture? Dianbao will make some relevant introductions through the following content.
How to renovate authentic wood furniture.
1. Oil-mixed finish: scrape the putty after grinding off the old paint with coarse sandpaper, wait for the ash to dry thoroughly and then polish it with fine sandpaper, then brush the primer, polish it twice after the paint is dry, polish it after brushing the topcoat several times, and finally spray the topcoat. 2. Clear oil finish:
Coarse sandpaper to grind off the old paint and scrape the ash, polish with fine sandpaper, then rub the color with color paint, brush the primer after sanding, and brush the topcoat at least twice after sanding again.
Solid wood furniture maintenance methods and precautions.
1. Clean the surface regularly: the surface is coated with paint, and the maintenance and maintenance of the paint film is very important, because once the paint film is damaged, it will not only affect the appearance, but also affect the internal structure of the furniture.
Method: Gently wipe the surface with a pure cotton and dry soft cloth to remove dust every day, regularly clean the dust in the corners and gaps with semi-wet cotton silk, and then dry it with a dry cotton cloth.
2. Regular waxing: The wax layer protects the paint surface and wood, and waxing can not only maintain the furniture, but also increase the brightness.
Method: Wipe the surface moisture before waxing, choose high-quality wax products, and avoid corrosion and damage to furniture by inferior wax.
3. Do not remove stains with the help of chemical solvents: remember not to rub hard if there are stains on the surface, and do not use chemical solvents to remove stains strongly, so as not to remove the stains and destroy the furniture.
Method: It is recommended to use a soft cloth dipped in warm tea to gently wipe off the stain, and then apply some light wax after the surface is dry, and gently rub it several times to form a protective film.
4. Moisture-proof and avoid direct sunlight.
Method: The re-damp weather can be separated by a thin rubber mat to avoid direct contact with the wet ground, and the wall furniture is recommended to be more than 5 mm away from the wall.
It should be placed in a position that is protected from direct sunlight or prolonged exposure as much as possible, or shielded from sunlight with gauzy curtains.
5. Professional care wax: the nourishing water it contains is more easily absorbed by solid wood, preventing dry cracking and deformation, and prolonging the service life.
Method: Don't save money and be lazy to wipe with a damp cloth, you should use professional care wax to maintain solid wood furniture.
6. Keep away from heat sources and avoid scratches by hard objects.
Method: Furniture should be at least 1 meter away from the heater to avoid drying and deforming. Pay attention to daily life, do not let hard objects collide with the furniture, and avoid scratches and damage.
-
Anonymous users2024-02-11The renovation of solid wood furniture requires the solid wood to be sanded, re-colored, and if there is a board inside that is not suitable, it may be replaced, and then reassembled and renovated as a whole.
-
Anonymous users2024-02-10Dear, I am glad to answer for you the renovation methods of old log furniture are as follows:1Gasoline 2Water 3Rubber water 4Sandpaper 5Brush 6Paint 7Cloth.
First, use coarse sandpaper to polish it first, don't polish too much at the corner, and try to keep the original shape of the furniture. 2. Wipe the polished powder clean with a soft cloth dipped in water. 3. For the first time to brush the paint, first use a brush to dip a small amount of paint in the paint bucket, from top to bottom, from left to right, corners and hidden places should also be rented and brushed.
Fourth, the furniture is dried, and the furniture that has been painted is placed for four or five hours, and the paint is allowed to dry naturally, waiting for the paint to dry. Fifth, polish again, after the paint is dry, take the fine sandpaper and polish it again. Polishing the uneven area flat, so that it is easy to brush the oak paint again later.
Sixth, the second time to paint, here need to pay attention to the paint is too thick, can be properly added rubber water to neutralize and dilute. Continue to dry and sand. Paint it a third time.
Wait again to dry.
The furniture naturally becomes old after a long time, which affects the appearance very much. Many people will choose to replace with new furniture, in fact, it is not cost-effective to buy new furniture, what should be done with old furniture to reuse? In fact, it can be reused with a simple tool renovation, which is both creative and fun. >>>More
Find a scrap collector or contact the scrap yard directly.
No one sits on the sofa for a long time! You're stumped everyone!
Generally speaking, veneer furniture is divided into solid wood veneer furniture and sticker furniture, veneer furniture generally feels rough and has a very textured texture, while sticker furniture is smoother and the color looks more uniform. When I first moved into the new house, my wife bought a table with wooden veneer, which felt pretty good.
1. Remove the oil stains on the wooden furniture: residual tea is an excellent detergent, spray a small amount of corn flour for wiping after wiping, and finally wipe the corn flour clean. Corn flour absorbs all the dirt that adheres to the surface of the furniture, making the paint smooth and bright. >>>More