Computer installation failure, computer installation in this situation who knows

This error often occurs when running a program built with the Nullsoft Scriptable Install System (NSIS), which can be caused by incomplete files, or a corrupted disk area where the program is stored, or by a virus. Whatever the reason, it is recommended that you contact the author of the program, re-install it.

Or attach the argument ncrc in the command line to try to install. (This method is not recommended).Don't be fooled by the text above, in fact, your computer is not as complicated as it is written, what is the reason for nsis error:

2.The installer was corrupted by a virus and infected by a virus.

3.The virus is removed by a common antivirus software, but it cannot be repaired perfectly. The next NSIS is a special kill, and the general hardware is fine.

This is not a virus.

Workaround:1Run the ncrc command to skip the installer check, and perform the following steps:

Find the installer and right-click to create a shortcut.

Right-click on the shortcut and click Properties.

Press a space after the target in the goal bar and enter NCRC as follows.

Then run the shortcut to install it.

This is the case if there is a problem with the memory module.

We'll be happy to answer for you.

If you are talking about the words under the desktop icon that have a negative normal segment, you can try the following methods (if the first three items are invalid after pasting on the desktop, please choose the fourth and fifth fixes):

1. Right-click the desktop Arrange icon and remove the tick before "lock a fixed web project on the desktop".

2. Right-click on the settings in My Computer Properties Advanced Performance In the drop-down list of visual effects, check "Use shadows for icon labels on the desktop", and then press Apply to OK.

3. If the fault persists, you can try the following methods. Right-click on the blank space of the desktop, click the "Properties Desktop Customize Honor Desktop Web" option, and then select the "Current Home Page" in the "Web Page" bar, and then "http .".Wait for all the checks in front of each item to be removed ("http ....")In order to add web pages or ** addresses from the Internet, you generally don't need them, you can delete them all), and remove the tick in front of the "Lock Desktop Project" below, and click OK to complete the setting.

4. Another situation is that after installing a certain program (such as the system prompt: whether to add the active desktop item to your desktop), the desktop text becomes opaque. In "Run", enter to open Group Policy, select User Configuration on the left side Manage Templates Desktop Active Desktop Double-click "Enable Active Desktop" on the right side, select "Disabled" on the page that opens, then double-click "Disable Active Desktop" and select "Enabled" on the page that opens, press OK to restart the computer to try.

5. It's really not good, you can**360 Guardian version or above have built-in 360 computer clinic or 360 computer rescue to repair desktop icon shadow option, please fix, select the system icon on the left, and select the right icon with a shadow Fix it immediately (**This software can also get 360 experts** help to solve the problem of icon shadows).

6. If the fault persists, restore the system or reinstall it (it can't always be solved, restore the system or reinstall it).

If you just use ghost to install the system and restart this problem,Pei Jue then you need to enter the macro scramble pe again,And then rebuild the main boot record to see if it can be solved。 Or reconfigure the system one more time.

Generally, there is a power supply in the host, motherboard, memory, hard disk, optical drive, if the motherboard does not integrate the graphics card, then there is an independent graphics card, the network card is generally integrated with the motherboard, and some also have an independent network card, and the same is true for the sound card. There is a CPU and a cooling fan on the motherboard, and there are also fans on the chassis. It's the chassis.

The main ones are motherboards, CPUs, memory, hard disks, graphics cards, power supplies, these large items, optical drives can be used even if there is no computer. But it's better to have it,

The first floor is right, how can you turn on the pro-power supply without you!

There is also a lack of chassis and power supply, sound card, network card (generally integrated with the motherboard).

Chassis and power supply, sound card, network card.

Power supply? Fan?

How do you start your computer without power?!

If you don't have a fan, you're not afraid that the temperature will be too high and burn off the motherboard?!

Power supply, chassis, fan... Landlord, you're so talented, huh... The plug-in cable of the power supply is plugged in the lower right corner of the motherboard, and if you don't know how to plug it in, if there is a name on the plug-in end of the plug-in cable and the wiring end on the motherboard, the name will be plugged in.

I recommend Calm King. Also pay attention to the interface between the CPU and the motherboard, there are pin-plug and contact types

There are three questions:

1. The system memory is too low, and the graphical user interface cannot be loaded.

2. There is a problem with the ghost software itself.

3. The graphics card is too non-mainstream, and it can be drawn out of the input content in B8000H, but as a result, the instruction set is too different (the situation is too rare).

Therefore, the solution is, change the memory, the facts, or change the installation software.

This interface appears when installing the machine because the new computer needs to install the system, and the installation system is now basically the ghost version, so you need to use this software.

If it doesn't move when you get to this interface, then there may be a problem with the hard disk, a soft fault or a hard fault. First, turn on the case, plug in the hard drive power and data cables, and make sure that all ends are plugged in tightly. Reinstall the system.

If you still can't use the partition tool, you won't need the hard drive data. Reinstall the system. Hope it helps.

It's good to redo the whole system.,It doesn't matter if it's a new machine.,Old computer.,No important information.,Re-formatting it all.,Partition.,Just redo it.。

Either there is a problem with the system disk, or the system is not cleaned up and there is a bug

It is recommended to reinstall a new system disk.

This is the interface for reinstalling the system.

Is the system reinstalled or restored?

I don't know, ah, ah, ah.

This is the basic input-output system (BIOS) of the computer, in general, if you do not change the boot order, you do not need to enter the BIOS, you can use CTRL+Alt+Delete to restart, and then it will not appear.

Haven't heard of installing the system into the BIOS reboot.