The making of the dragon head centipede kite, who knows how to make the dragon head centipede kite

Here's how a centipede kite is made. 1. Tie a circle with a diameter of 17 cm with bamboo strips 2, make the outer frame of the two ears and eyes 3, take a thick piece of paper 4, roll it into a circle, and paste half of the eyeballs on each side of the circle 5, wear the two eyes into a string to make a rotating movable eye 6, tie it into the head shape of a lizarpede 7, tie the body skeleton into a circle, with a diameter of 17 cm, and make a few sections 8, take a bamboo strip as a balance bar (the pole is 69 cm long), and tie three to four rooster tail feathers on both sides of the pole, and the distance between the two sides should be equal. 9. Paste nylon cloth 10, centipede's tail 11, the distance between the lines of each section is 37 cm, and the three lines should be the same length, not long or short 12, tie three threads, one at the top of the head, two on both sides of the head 13, according to their own creativity The production process of this kite comes from Xie Jinjian's grandfather's book "Chinese Kites".

I would like to ask if you have ever touched a Chinese kite, if you don't, I suggest you don't make a dragon centipede, which has a certain degree of difficulty for you. The study of Chinese kites does not happen overnight. Some people have been playing kites since they were young, and they have been learning to make kites for 20 years since they were teenagers, and they barely know what Chinese kite ...... is

I'm just going to make a few noteworthy points for your attention.

1. The dragon head centipede is made by the string burden method, and the length of the burden is between 3 and 6 times the diameter of the stalk. But the longer the seed, the more stable the centipede. But not more than 6 times.

2. The spacing between the dragons is between the times of the diameter of the dragons. But not more than 2 times.

3No matter how many knots you want to make, the width and thickness of each bamboo stick should be consistent.

4. If the thickness of a bamboo strip is the same from beginning to end, it can be formed into a circle without baking.

5 If you really can't do it, I can teach you three methods, 1) Put the bamboo strips in a pressure cooker and heat them for 5 minutes. This method is dangerous and should be done with caution when making it.

2) Find a round iron ring with the same diameter, burn it red, soak the bamboo strips in water for 30 minutes, and then bake them outside the iron ring.

3) Find a circle with the same diameter, coil the bamboo strips in the circle, and then soak them in water for about 1-2 hours, take them out to dry, and adjust them after taking them out.

The production of 6 legs is also more complicated, we call this kind of strip jujube core strip, that is, the middle is thick and slightly soft.

7. When pasting, pay attention to choosing the dry weather to complete, put a coin on a flat table, and put the picture on the coin on the upper skeleton.

8. The link and adjustment of the centipede thread is the key to the whole kite production, and the three threads should ensure that the length is consistent and the thickness is moderate. Lines: Select lines that are not elastic. Especially the final adjustment, if you don't have the experience of flying, IMHO, you can't tune the dragon.

If there is a problem, you can't start, in the process of bolting the wire, millimeters of mistakes, the size of the wind speed may cause the failure of the release, the wind is small and the dragon wind can not be released is a frequent problem.

The above is what I think I should pay attention to in the process of production.

If you want to learn, I can help you introduce you to a respected old man named Li Chuanhong, the leader of the Hu sect, and you can learn from him.

Tie a 17 cm diameter circle with bamboo strips to make the outer frame of the two ears and eyes.

Take a thick piece of paper, roll it into a circle, attach half of the eyeballs on each side of the circle5, and string the two eyes together.

The head shape of the lizarded is pierced, and the body skeleton is tied into a circle, with a diameter of 17 cm.

Take a bamboo stick as a balance bar (69 cm long), tie three to four rooster tail hairs on both sides of the pole, and the distance between the two sides should be equal. Then paste the nylon cloth.

The distance between the links of the tail of the centipede is 37 centimeters, and the three lines should be the same length, not different lengths.

Tie three threads, one at the top of the head and two on each side of the head, and finish with your own creative color.

The centipede kite combines the characteristics of three-dimensional kites and string kites, and is composed of hand-tied three-dimensional dragon heads and many waist pieces with dragon arms, which is the representative work of Weifang kites.

At the first China Intangible Cultural Heritage Expo in 2012, a total of 622 intangible cultural heritage protection projects across the country participated in the exhibition, and finally, the Weifang kite making skills represented by the "dragon centipede" won the gold medal.

The process of making a centipede kite.

1.Multi-section long kite is not easy to control due to the large buoyancy lift, the diameter is small and the wind surface is small, the weight itself offsets the buoyancy force, so the diameter is 22-25 cm, if the diameter is set at 23 cm, each centimeter of the long bamboo strip must be intercepted. Width of about centimeters, thickness of centimeters.

2.Draw a circle with a diameter of 23 cm on white paper, and divide the circle into two equal parts with two vertical diameters as a mold. The bamboo strips are surrounded by bamboo rings, and the binding line is sawn into two marks and fixed.

3.Adjust the bamboo ring so that it is the same as the circle of the paper mold, so that the bamboo ring can become a perfect circle.

4.Use a one-meter-long bamboo strip to frame the bamboo ring. The weight on both sides of the center point must be balanced (hold your fingers against the center point and trim the hanging side). The bamboo strip must be on the diameter.

6. The plastic cloth glued to the bamboo ring should be adjusted and tightened to form the same perfect circle as the paper mold. Cut out the plastic sheeting outside the perfect circle with the edges.

The centipede kite is actually a very good kite, that is, the amount of work is larger, young people do not try it easily, because it is very abrasive, and the home will be very dirty, but the elderly are more suitable, and it is very comfortable to pass the time after retirement, not much to say, remember my secret: (1) The waist and the bamboo should be cut as thin as possible, lighter, do not worry about the strength, it is absolutely enough. (2) The three ropes of the waist section should not be elastic, they should be stretched first, and there will be no elasticity when coated with diluted latex"Kafler","Vigorously"Isoline but very expensive) after drying draw the dot on the tie waist joint.

3) Sew the waist joint on the steel rope, the direction of the sewing should be consistent, and the waist joint will be neat. (4) You can fly with or without a head, and you can fly with a slight adjustment according to the above points. (5) If you are willing, you can do it for a long time.

You can take a look at the details.

Hope it works for you!

The "dragon head centipede" kite is the representative work of the kite in Weifang, Shandong. It is more than 100 feet long and consists of three parts: the dragon's head, torso (dozens of sections) and the dragon's tail. The parts can be relatively independent and yet connected as one.

When flying, the tail is lifted first, then the torso, and the lifting force generated by the last dozens of three-dimensional parts slowly pulls up the head weighing a few pounds, and the whole centipede takes off and ascends to the sky. After entering the sky, like a giant python in the air to resist the wind, the momentum is very small, magnificent. Another miniature dragon head centipede kite, only the size of a red date, fits in a matchbox.