Baojun 560 air conditioner is not cool, do you want money to go to the 4S store?

Hello, if the air conditioner is working normally, but it is not as cold as before, generally because the air conditioning refrigerant is not enough, you can add some refrigerant, this outside repair shop can also do, does not affect the car warranty, about **50-80 yuan,

See what the fault causes, if it is a lack of refrigerant, this addition needs to be charged.

Hello, looking for a 4S shop warranty, the non-human fault during the warranty period must be free of charge. Generally, there is a lack of fluorine in the car air conditioner.

Hello, if the car is still within the warranty period, it can be repaired free of charge, and it should be charged after the warranty.

Hello, during the warranty period, you can go to the store for inspection and maintenance. If the warranty period is over, you will need to spend money again.

If your car's air conditioner is still there, within the warranty period, you can go to the four-S shop to repair it for free.

This needs to be checked specifically and what causes it. During the warranty period, due to quality problems, it can be repaired free of charge.

If this situation occurs during the warranty period, the four-S shop can repair it free of charge.

In this case, it should be the lack of refrigerant in the air conditioner, if it is in the warranty period, it is recommended that you go to the 4S store to let the master help you get it.

If you see a large number of bubbles through the observation window, the refrigerant is insufficient. If you pour water on the condenser to cool it and there is still no foam in the observation window, it means that the refrigerant is excessive.

Check the joints and joints of each device for oil stains.

Oil stains in joints or joints indicate refrigerant leakage and should be re-strengthened or replaced.

Hello landlord, your car is a new car or an old car, how long has it been, and whether there may be a lack of fluoride.

Baojun Automobile 560 air conditioner does not cause cold, and the cooling effect is not good, which is likely to have the following reasons: 1. Refrigerant leakage. (It is manifested that the internal and external units are working, and the compressor is also working, but it is also ineffective).2. The compressor capacitor is damaged or suboptimal, causing the compressor to not work.

The situation is similar to the above, but the compressor does not rotate and the temperature is over).3. The resistance value of the indoor temperature sensor head changes to the value of the dust, causing the air conditioner to not work. (The condition is the same as that of the air conditioner after setting the temperature and turning it off).

4. The controller is abnormal or the air conditioning signal receiver is not good. (Manifested as no reflection of the air conditioner when it is turned on, or not sensitive when it is always active).5. Four-way valve (there is no common fault in a single refrigerator) or compressor with high pressure and low yard pressure is blocked, and the air conditioner works but has no practical effect.

The condition is the same as the first).6. The common failure of the controller of the air conditioner inside or outside the air conditioner causes the air conditioner not to be cold. (Manifested as no reflection of the start-up or the air conditioner moving to do it).

7. The zero live wire of the air conditioner switching power supply is wrongly connected. (A very small number of air conditioners will produce this common failure, usually in the case of computer installation).8. The internal or external fan of the air conditioner is damaged (the capacitor is more damaged), (the failure of the external fan is manifested as too high exhaust temperature or high pressure maintenance.)

If the fan inside the air conditioner is bad, the air conditioner will be frosty, the outside unit will be working, and the internal machine will not get water into the equipment.

1. Capillary blockage, if a certain temperature zone is not refrigerated, and the solenoid valve is normally reversed, it can be judged to be a system problem, and it is necessary to be cautious and further open the system to judge. 2. System failure, check whether the capillary is dirty, oil or ice, if the refrigerator is sometimes refrigerated and sometimes not refrigerated, it is generally ice blockage, if the nitrogen blowing pipeline blows out the dirt or hail is not smooth, it means that the dirt is blocked or the oil is blocked, if the system has no refrigerant, it means that the refrigerant is leaking, check the leakage point for maintenance.

The Baojun 560 air conditioner is not refrigerating, probably because the air conditioner compressor is not working. Capillary plugging: If a certain temperature zone is not refrigerated and the solenoid valve is reversing normally, it can be judged to be a system problem, and the system needs to be further opened for judgment.

System failure: check whether the capillary is dirty, oil or ice blockage, if the refrigerator is not refrigerated when refrigerating, it is generally ice blockage, if the nitrogen blowing pipeline blows out the stolen goods or is not smooth, it means dirty blockage or oil blockage, if there is no refrigerant in the open system, it means that the refrigerant is leaking, check the leakage point for maintenance.

1. Temperature zone closed: check whether each temperature zone is closed. At present, there are two ways to display the refrigerator when it is closed, one is to close a certain temperature zone, and the temperature zone does not display the temperature. The other is to turn off a certain temperature zone and show of.

2. Sensor failure: If a certain temperature zone is not refrigerated, such as a refrigerator or variable temperature room, you can check whether the sensor parameters of the temperature zone are normal.

4. Capillary plugging: If a certain temperature zone is not refrigerated and the solenoid valve is reversing normally, it can be judged that it is a system problem, and the system needs to be further opened for judgment.

Photo by Q&A) NIO EC6 Xpeng P7 Marvel R VOYAH Free Audi A4L Model Y @2019

Summary. The inner circulation switch is turned off for a long time.

The inner circulation switch is turned off, causing the refrigeration effect to decrease.

What should I do if the refrigeration effect of Baojun 560 air conditioner is not good.

Hello, I have seen your question and am sorting out the answer, please wait for a while Baojun 560 air conditioner does not treat cold.

It could be that the condensation net is covered with dust.

The condensation net behind the front grille is covered by dust, which causes poor refrigeration effect. In this case, the owner only needs to pay attention to rinsing the dust of the condensate with the faucet when washing the car, which can solve this problem.

No I watched.

The internal circulation switch is closed for a long time, and the internal circulation switch is turned off, which causes the refrigeration effect to decrease.

I know that.

Have you troubled your air conditioner compressor?

Not. It's going to turn too.

Then you can go to the 4S store to troubleshoot the problem first.

The reason why Baojun 560 is not cooling may be that the empty compressor is not working. Capillary blockage: If a certain temperature zone is not cooled and the solenoid valve is reversed normally, it can be judged that it is a system problem and further system judgment is required.

System Failure: Check the capillary for dirty, oily, or clogged ice. If the fridge doesn't cool when it cools, it will usually get clogged with ice.

If the pipes are blown out of the dirt or clogged by blowing nitrogen, it means dirty or clogged. If there is no refrigerant in the open system, it means that the refrigerant is leaking. Inspect and repair leaks.

1.Turn off temperature zones: Check if each temperature zone is off. Currently, there are two ways to display the refrigerator when it is turned off. One is to turn off a certain temperature zone, and the temperature buried zone does not display the temperature. The other is a display that turns off a specific temperature range.

2.Sensor failure: If a temperature zone is not cooling, such as a cold room or variable temperature room, check whether the sensor parameters of that temperature zone are normal.

4.Capillary socks are blocked: If a certain temperature zone is not cooled and the solenoid valve is reversed normally, it can be judged that it is a system problem and further system judgment is needed.