Lenovo printer how to change the reflection, replace the toner cartridge Lenovo printer

Updated on technology 2024-06-14
12 answers
  1. Anonymous users2024-02-11

    Fixing, big brother? What about the reflection that comes hallucination?

  2. Anonymous users2024-02-10

    This powder is very easy to add, the key is to clean up the waste powder.

  3. Anonymous users2024-02-09

    Disassemble the cartridge and toner cartridge so that there is a place next to the rear cartridge that can be disassembled, and pour the powder directly into it after disassembly.

  4. Anonymous users2024-02-08

    Go to the place where you bought the printer, and you can buy it.

  5. Anonymous users2024-02-07

    If you don't know how to replace it with professional staff, you can also call the service **400-810-1234 for related consultation.

  6. Anonymous users2024-02-06

    The cartridge of Lenovo inkjet printer is super expensive and costs more than 300, and I personally think that the inkjet printer of Epson ME1+ is not bad for the family type, and it is very affordable. There are more than 100 original cartridges and 50 domestic ones.

  7. Anonymous users2024-02-05

    Lenovo 1201 Printer Cartridge Lenovo Color 6001 Cartridge. Black is the 6001 cartridge.

    You can see that there's a thick bent plastic strap in the case, and that means you can open the lid of the cartridge.

    You just 1: plug in the power cord, 2: turn on the machine.

    3: Open the lid of the cartridge change (there is a cartridge holder and walk naturally to the middle).

    4: If the printer has an ink cartridge, you take off the ink cartridge, you just change the ink cartridge and go up, (you take it down there, you put it back there).

    5: If there is no ink cartridge: You can see that there are contacts in the ink cartridge (there are contacts at one end of the ink cartridge) and the contacts are put back on the contacts, just right.

    6: You've learned, teach some tuition!

    7: Don't take the bent thick plastic strip out of the case! Hehe! This is the connecting line. Connected to the print host!

  8. Anonymous users2024-02-04

    1. Prepare new cartridges: color and black cartridges.

    2. Press the Enter Paper button on the printer.

    3. Open the lid of the printer.

    Note: Under the lid is the ink cartridge, if the paper is jammed, you can open it and take the paper out.

    4. Open the lid of the black cartridge and take it out.

    5. Put in the new black ink cartridge and put it right! Otherwise, the cartridge will be damaged.

    6. Press the ink cartridge tightly, and the contact position between the printer and the ink cartridge will be inserted into the ink cartridge. Therefore, the printer must be pressed tightly to absorb the ink in the ink cartridge.

    7. Close the lid and snap it on.

    8. Open the lid of the colored ink holder, and you will see the colored ink cartridge.

    9. Take out the used color cartridges.

    10. Load the new color ink cartridge and press it tightly.

    11. Close the lid of the color cartridge again.

    12. Close the lid of the printer again, so that the black and white and color ink cartridges can be replaced.

  9. Anonymous users2024-02-03

    There's a thick band of curved plastic in the case, which is the cable for the printer cart. It is the connection line between the printer and the ink cartridge chip. If broken. The printer is scrapped.

    It's done like the second floor, and there are two slots inside, and the left one is for the black ink cartridge. On the right is a color cartridge.

    If the printer is connected to the power supply and the printer lid is opened, the cartridge slot will not automatically come to the middle, then you can only pull it out by hand, you can carefully pull the curved plastic thick belt you said, be sure to pull it slowly, be careful.

  10. Anonymous users2024-02-02

    When you take it to the computer city to buy it, let the family help you install it, you see, it's very simple, and you will install it yourself later, and if it's expensive, you should pay the tuition.

    However, Lenovo's ink cartridges are very expensive, and if you use the printer for a long time, it is still cost-effective to buy a new HP.

    Lenovo's consumables are too expensive HP has a replacement cartridge that is very cost-effective.

  11. Anonymous users2024-02-01

    1All Lenovo LJ2400 is a laser black and white printer, and the consumables are drum powder separation. The toner used is LT2441 or LT2441H. After the toner is used up, you can directly replace the toner cartridge or add powder. Open the front cover, take out the toner, and replace the toner cartridge. Adopt it.

  12. Anonymous users2024-01-31

    Can be changed. A utility knife pries the green lid open and adds ink.

Related questions
6 answers2024-06-14

Either you didn't install it well, or you installed it not original, and the system can't recognize it. >>>More

9 answers2024-06-14

Dear Lenovo users, hello!

I'm very sorry, this side is mainly responsible for the technical problems of Lenovo computer, the printer can not query the information, I don't know very much, it is recommended that you contact Lenovo printer after-sales service** for specific consultation: >>>More

10 answers2024-06-14

The printer is connected to the computer, it depends on whether you are a network printer or a normal ordinary printer, the network printer must be connected to the LAN, and then the computer is driven by the first driver, and the network printer can be printed. If you want a normal printer, you need to connect the print data cable, and then install the computer printer driver to print.

9 answers2024-06-14

The steps are as follows: 1. Remove the toner skeleton from the printer. >>>More

7 answers2024-06-14

The 2500's driver can sometimes go wrong.

Add printers directly to Printers and Faxes. >>>More