How to clean a fully automatic drum washing machine

The method of cleaning the dirty things in the drum washing machine is as follows: 1. Clean the laundry bucket with a special detergent for the washing machine to fill the laundry bucket with clean water to the highest water level, then pour the detergent into the laundry bucket, run for five minutes to fully dissolve the detergent, if the washing machine can be heated, it can be heated to 40 degrees, then turn off the power of the washing machine, soak for about an hour, and then clean it according to the daily washing mode, when the washing machine stops, a large number of dirt fragments will float on the water surface. 2. Use drifting agent to clean the washing machine Add an appropriate amount of chlorine-containing bleach to the washing machine, then fill the washing machine with water, stir it evenly after the water is filled, and the dirt can be thoroughly cleaned after 20 minutes.

3. Use household white vinegar to clean the washing machine, first fill the washing machine with more than half of the water, then do not put any washing items, let it soak for more than three hours, then start the washing machine switch to rinse several times, then put half of the water, and finally pour the white vinegar into the washing machine barrel, put the water away after leaving it for one night, and then wash it with clean water again, and then open the lid of the washing machine and let it dry naturally.

Precautions for the use of drum washing machine: 1. When the "washing" or "rinsing" program is selected, the wave wheel will not run until the selected water level. 2. During the dehydration procedure, the cover must be closed, and the cover should not be opened from time to time.

3. Never touch the washing and dehydration bucket with your hands, so as not to get your hands involved and cause danger. 4. Do not wash or dehydrate clothes containing volatile substances (solvents, alcohol, etc.) to avoid accidents. 5. When the dehydration is unbalanced, the computerized automatic washing machine can be corrected for dehydration imbalance, if the imbalance problem is not solved after 2 corrections, it will stop and alarm, at this time, the cover should be opened, the clothes that are squeezed on the side should be placed evenly, and then the cover should be closed, and the "start pause" button can be pressed.

How to clean a fully automatic washing machine:

1. First of all, remove the dirt tank inside the washing machine and clean it; Secondly, pour detergent into the laundry bucket, adjust the water level to the highest, and add an appropriate amount of hot water to clean; Finally, add half of the water to the bucket and wash it again.

2. You can also use vinegar for cleaning. Soak the towel in vinegar, place the towel in the washing machine and press the spin dry mode. It is best to use a large towel, and a bath towel is also a good choice.

3. Use baking soda for cleaning. Mix baking soda and water in a one-to-one ratio, pour it into the washing machine, and fill it with water to prevent it from leaving for two hours, then cover the lid and wash it, so that the washing machine is clean.

4. Of course, using a special washing machine cleaner to clean the washing machine is also the choice of most people. With this specialized cleaning agent, the washing machine does not hurt too much. Find a large bucket and pour in water and descaler, and mix the descaler in a ratio of 1 to 2 for water.

Then pour in the special detergent and stir well. After the washing machine has been running for 20 minutes, find a bucket to drain the water. The drained water is poured into the washing machine and drained repeatedly – pour it in, and drain it when it is clean.

The specific operation steps of automatic drum washing machine cleaning are as follows:

Tools: fully automatic washing machine, washing machine sink cleaner.

1. Choose a washing machine tank cleaner suitable for drum automatic washing machine with sterilization, descaling and mildew removal effects.

2. Pour the washing machine sink cleaner directly into the washing drum.

3. After cleaning and opening, use it all at once, and do not pour the detergent into the washing machine.

4. Close the side door of the washing machine and skip the pre-wash procedure.

5. Directly select the main washing program, add water, and run for about 5 minutes to fully dissolve the detergent.

6. When the dirt is serious, it is better to use warm water at 40°C.

7. Cut off the power supply and soak for one hour, it is recommended to soak for 2-3 hours when the first use or dirt is more serious.

8. Wash it once according to the standard mode of daily washing of the washing machine.

9. If the amount of dirt discharged is too much, you can put a bath towel or towel in the washing machine, and then wash it once according to the daily washing standard mode of the washing machine.

1. Pull out the washing machine box, dilute the washing machine cleaner with warm water (a small amount is OK) and brush it with a brush, and the inner wall of the drawer box can also be brushed with a toothbrush dipped in the cleaning agent.

2. Clean the sealing ring of the washing machine, the sealing ring of the washing machine will generally be easy to corrode after half a year, such as it will look dirty or mildewy but can not be wiped off, so the best way is to be diligent, and wipe the inner groove of the rubber ring with a dry towel every time you wash the clothes.

3. If there are corroded mildew spots on the rubber ring, you can wipe the mildew spots of the rubber ring clean and keep them dry, and evenly apply the mold remover to the mildew spots, which need to be soaked for 5-12 hours according to the degree of dirtiness and choose the length of time.

4. To clean the inner cylinder of the washing machine, first dissolve the cleaning agent with warm water according to the instructions, and then pour it directly into the inner cylinder of the washing machine, remember not to pour the laundry detergent to add the box, because this cleaning agent has a certain corrosion on the plastic, then adjust the water level to the highest, cut off the power supply and soak for about 2 hours, and then turn on the machine to let the washing machine run according to the normal cleaning procedure.

5. Clean the drainage of the washing machine, this is to be operated when the washing machine stops working, first open the decorative cover at the bottom right of the washing machine, you can see a lot of dirt in the area of the filter, pull out the filter screen and use a brush to clean it, the inner wall of the drainage pump should also be cleaned, and the dirt will enter the inner cylinder of the cleaning machine again, and it is generally best to clean it once a month.

6. Finally, let's talk about the disassembly and cleaning of the washing machine, disassembling the drum of the washing machine for cleaning is a very technical job, and the cleaning effect is very powerful, but you need to find a professional disassembly and cleaning company or brand after-sales, and the washing machine during the warranty period is not recommended to be disassembled and cleaned.

The cleaning method of the automatic drum washing machine is as follows:

Pull out the washing machine box, dilute the washing machine cleaner with warm water and brush it clean.

Wash the sealing ring of the washing machine.

If there are corroded mold spots on the rubber ring, you can wipe the mold spots on the rubber ring and keep the pin core dry.

Dissolve the detergent in lukewarm water as indicated and pour directly into the inner drum of the washing machine.

Wash the drain of the washing machine.

Disassembly and cleaning of washing machines.

I hope the above information is helpful to you, and if you have any other questions, welcome to let me know.