Hidden dangers of the meter box in the corridor? 50, the hidden danger of the meter box in the corri

Hello, look at the distance between the meter box and the integrated stove, whether the stove uses gas or electricity, whether there is a window between the two, etc., many factors. Strictly speaking, if the gas leakage concentration is high, it overflows to the location of the meter box, or if the static electricity causes abnormality when the box is opened, the meter box will also be damaged at the same time, and the user's situation can be imagined.

Normally, no problem, but just in case, this installation method is not recommended for safety reasons. Of course, it's much safer if there are no windows on the exterior walls.

There is no hidden danger in returning, because there is a wall, and the gas company and the power company also come down to inspect and inspect regularly, and they have done a good job of prevention in advance. There is no hidden danger in returning, because there is a wall, and the gas company and the power company also come down to inspect and inspect regularly, and they have done a good job of prevention in advance. There is no hidden danger in returning, because there is a wall, and the gas company and the power company also come down to inspect and inspect regularly, and they have done a good job of prevention in advance.

There is no hidden danger in returning, because there is a wall, and the gas company and the power company also come down to inspect and inspect regularly, and they have done a good job of prevention in advance.

The meter box in the corridor does not emit a lot of heat, so there is no safety hazard. It's much safer than leaving a meter box at home.

There should be no problem with this point that electricity and gas are separated by a wall, not to mention that electricity and gas units have a regular inspection system, which is safe.

In the cold winter, with the large increase of electrical equipment such as air conditioners and electric heaters, the load of electrical wiring increases, and some of the meter boxes in the corridor cannot withstand the "baking" test and "fire". Mainly because of the usersElectrical appliances such as air conditioners and electric heaters at home are overloaded, resulting in meter boxes**。In addition, some residential buildings are intrinsicFlammable items such as sundries and old furniture stacked around the meter box will also pose a safety hazard

In addition, it is also easy to get wet, install incorrectly, or wired from the meter box privately**.

I feel that you are thinking a little too much, and if you want to say that there are hidden dangers, then I think that the hidden dangers of things in your home are even greater, and some things can not be thought about or associated, because if you think too much, you will feel more and more serious problems, in fact, there is really no problem with this.

You're thinking too much. The installations are now well thought out. Hidden dangers are everywhere, and prevention is better than prevention.

As long as the installation is regular, there will be no hidden dangers.

Possible reasons why the meter box in the corridor keeps ringing:2. The manufacture of the meter is unqualified, and a large eddy current is generated on the turntable, forming eddy current vibration.

3. The electromagnetic coil or iron core is loose.

4. The upper bearing hole that supports the rotation of the disc is too large or lacks oil.

5. When the disc is too close to the magnet, electromagnet or other parts due to improper installation, wipe the disc slightly.

The correct way to install the meter box.

1. Please carefully check the integrity of all parts of the meter box during installation.

2. The installation position should be selected in a place where there is no violent vibration and impact is not enough to damage the electrical components.

3. The meter box should be installed vertically and the tilt angle should not exceed 5°.

4. The meter box should be maintained and cleaned during use.

5. Because the materials used in the meter box are not resistant to strong alkalis, oxidizing acids and amines, ketones, soluble in hydrogenation paths and aromatic solvents, contact with these chemicals should be avoided.

6. When installing the meter box, try to choose a cool and dry place to avoid direct sunlight for a long time, so as to prolong the service life of the meter box, electric energy meter and electrical components.

7. In the process of use, sharp objects and hard objects should be avoided from colliding and scratching the surface of the meter box.

Summary. The aisle is counted in the shared area, generally each unit's corridor, entrance hall, elevator shaft, corridor, aisle, meter box, etc. are counted in the shared area, the only difference is that the specific shared area is divided equally according to the number of households, if you have fewer households, then the shared area is large, if there are more households. In addition, the shared area is small.

My house is a detached family, and there is a common meter box, can it be considered my area?

The aisle is counted in the shared area, generally each unit's corridor, entrance hall, elevator shaft, corridor, aisle, meter box, etc. are counted in the shared area, the only difference is that the specific high and rough shared area is divided equally according to the number of households, if you have fewer households, the stool is large, if there are more households. In addition, the shared area is small. Qi Heng.

Whether the meter box occupies or does not occupy the shared area depends on what building is built. If it is an old building with less than seven floors, the meter box is installed on the wall between the 1st and 2nd floors, and the meter box should not occupy the shared area. If it is a small high-rise or high-rise, the meter box is located in the meter well on each floor, and it should occupy the shared area according to the regulations.

Because the scope of the shared area is as follows: The shared area refers to the construction area of the common part of the whole building jointly owned by the property owner of the whole building. Including the number of sleepy eyes:

Elevator shafts, pipe shafts, stairwells, garbage chutes, substation rooms, equipment rooms, public foyers, aisles, basements, guard rooms on duty, etc.

On this floor, I am alone, and there is no other family, and the meter box is my own.

The ground branches included in the shared area are as follows: the entrance hall, corridor, corridor, aisle, elevator shaft, electric meter box, and water tank of the unit are all included in the shared area.

What I said is not specific enough, I can see the meter box as soon as I get off the elevator, when I just bought a house, I told that the wall can hit the cabinet now can not be played, and the normal meter box is calculated in turn, depending on the number of households to determine the specific number of shares, as you said, this has to be negotiated with the agreement signed at that time, or the maintenance of liquid closure to protect their own rights and interests.

Generally speaking, the meter box in the corridor is not counted in the floor area because it is usually regarded as a land disturbance utility or service equipment and not part of the building. As a result, it is not usually counted in the total square count of the building. However, in some special cases, such as the meter box taking up a lot of space or the meter box is already surrounded by the main structure of the building, it may be dismantled and buried to be included in the construction area.

However, this situation is relatively rare and needs to be judged on a case-by-case basis. It is important to note that different countries and regions may have different standards and regulations for calculating the floor area, so it is best to check with your local construction and real estate department for specific regulations.