How do you make the wood into our common curved doors?

Many homes will install curved cabinet doors when decorating, curved cabinet doors not only look good, but also have a lot of storage space, so they are widely popular, so how do our ordinary wooden boards make our common curved cabinet doors? There are three main steps in the production process.

Clause. 1. Pieces of square wood.

Run through the wood shaper so that its edges are cut at a specific angle. Then the workers use a glue applicator on their bevel.

The edges are coated with adhesive. Next, he arranged the square timbers in rows on an assembly piece of furniture and adjusted them to a specific radius and curvature. This is a processing plant specializing in the manufacture of curved cabinet doors.

Before the timber is automatically cut, the factory first makes a sketch and converts it into technical drawings, which are then compiled onto a wood former to ensure that each square timber is cut to a specific angle.

Clause. Second, the workers use the furniture to tightly add the square wood together, and the glue will cool and solidify within 20 minutes. The planks are then placed on a computer-guided router, which creates a smooth surface on both sides of the planks.

Subsequently, the workers replaced the head of the router and carved a slot in the edge of the contour of the board for mounting the door frame. Of course, you can also customize specific patterns or texts according to your needs. A computer-guided sander then smooths the surface of the board for later dyeing or painting.

Clause. Third, the next step is to start making the edge frame of the cabinet door, the worker applies heat-activated glue on the thin wood chips, and then stacks them on the curved cabinet door planks, and the press squeezes the thin wood pieces tightly together, and then generates a large amount of heat due to the current to trigger the adhesive to make the thin wood chips bond into a curved plank, and then these frame planks can be glued to the card slot of the curved cabinet door with adhesive, and then the workers use the furniture to add them together again to let the glue solidify. Half an hour later, a custom-made curved door was made.

Open the wooden slats, put them on, add glue, add decks, fix them and then take them down, and after stacking them many times with a certain thickness, cut them into an arc with a cutting machine.

How is the wood made into our common curved cabinet doors, whether you want to make our common curved shape, you need to use a special machine to polish the wood first.

Turn the deck around, open the wooden slats, put it vertically, add glue, and then add the deck, simply fix, glue dry and then take it down, the shape is exactly the same, overlap to a certain thickness many times, and use a cutting machine to cut it into an arc to make our common arc cabinet door.

Some people's cabinets at home are curved, and naturally they need to be equipped with curved cabinet doors, so as to present a better effect, but it is not very clear how to make curved cabinet doors. When making cabinet doors, you also need to choose the right plate, the plate is easy to use, so, what are the plates of the cabinet door?

First, the curved cabinet door production method.

1. On the high-quality large core board (blockboard), dig out the skeleton according to the size of the arc, paste two layers of three splints on both sides of the large core board, and then glue, and be uniform when coating milky white glue to ensure that the three splints are bonded tightly without gaps.

2. Use the large core board (blockboard) to make the model according to the radian, and fix the two layers of three splints on the model. The high-quality twelve-plywood is sawn into 20mm wide strips, nailed to the three-plywood with a spacing of 30mm, fixed on the large core plate model, and then nailed another layer of three-plywood.

Second, what are the plates of the cabinet door?

1. Particleboard.

Particleboard, also known as solid wood particle board, is a kind of man-made board made by cutting wood or other wood fiber materials into pieces of a certain specification as raw materials, drying them, mixing them with hardeners, adhesives and waterproofing agents, and pressing them under heat, pressure and a certain temperature.

2. MDF.

MDF, also known as fiberboard, is a kind of man-made board made of wood raw materials such as branches and trunks or other plant fibers as raw materials, which are hot-grounded, sized, dried and paved and hot-pressed.

3. Moisture-proof board.

Moisture-proof board, that is, to add moisture-proof particles to the particleboard, its biggest advantage is that it has moisture-proof, so that the degree of expansion of the board in contact with water is greatly reduced.

4. a large core board.

The large core board, also known as blockboard, is made of two pieces of veneer in the middle of the glue splicing board, the middle board is made of high-quality natural wood board after heat treatment, processed into a certain size of wood strips, spliced by the splicing machine.

5. Fir plank.

Fir planks are generally made of high-quality fir wood as the base material, which is made by high-temperature degreasing and drying, splicing, finger jointing, sanding and other processes.

6. Multi-layer solid wood boards.

Multi-layer solid wood board is made of three-layer or multi-layer veneer or thin board glue pressed by hot pressing, which has good stability, is not easy to deform, and can adjust indoor temperature and humidity.

7. Aosong board.

Ausson board, also known as oriented structure particleboard, is named because it is imported from Australia. It has high strength, high finish, smooth surface, and is relatively easy to process.

8. Ousong plate.

Ousong board, also known as directional structure particleboard, is made of fast-growing wood and thinning wood as raw materials, processed into flakes through special equipment, and made by drying, sizing, screening, directional paving, continuous hot pressing molding and other processes, because it comes from Europe and is named.

The curved cabinet door production method is as above, and the curved cabinet door can be made step by step according to the needs to ensure the final production effect. What are the panels for cabinet doors? The effect of cabinet doors made of different plates is different, so when buying cabinet doors, you should also see which plate door will be more suitable. Annihilation.

Turn the deck around, open the wooden slats, put it vertically, add glue, and then add the deck, simply fix, the glue is dried and taken down, the shape is the same, overlapping to a certain thickness many times, and then cut it into an arc with a cutting machine.

It can be made by the factory or made on site by woodworking.

There are many ways to make it, please refer to the following:

1. The arc-shaped door panel customized by the manufacturer, which is made by the manufacturer with wire or vertical shaft milling, and then the edge is sealed;

2. Workers make door panels on site; Use an MDF cutter to cut the groove, brush the gap with white latex and then bend the MDF into the required arc.

3. The whole wood is carved out, which is not expensive.

The arc of the arc in the figure is not very large, use the MDF cutter to cut the groove, and then bend the MDF into the required arc by brushing white latex in the gap of the groove.

Personally, I feel that I have found a decoration to get it in two clicks, and I don't have to bother with that

It's simple. The whole 3 decks are enclosed and enclosed. Open the wooden slats.

Put it upright. Add glue. Then add 3 more decks.

Simple fixation. The glue is dry and is being taken down. The shape is the same.

You should understand that. If you don't understand, you can't help it.

Wood core board can be done, find "Wuhan Guangjun artificial stone processing factory", they have done a lot of such arc bar.

Use a large core board to make an arc-shaped skeleton, and wrap it out with a 5 centimeter plate to make oil mixing.

After engraving, and then the film, we have a film machine, q895132055, you don't need to add me to do the paint, thank you.

How to do the arc-shaped cabinet door turn the deck up, open the wooden slats, put the bridge skin vertically, add glue, and then add the deck, simply fix, the glue is dried and taken down, the shape is the same, overlapping to a certain thickness many times, and then cut it into an arc with a cutting machine. It can be made by the factory or made on site by woodworking. There are many ways to make it, please refer to the following:

1. The arc-shaped door panel customized by the manufacturer, which is made by the manufacturer with wire or vertical shaft milling, and then the edge is sealed; 2. Workers make door panels on site; Use an MDF cutter to cut the groove, brush the white latex in the gap of the groove, and then bend the MDF into an arc that requires a difference. 3. The whole wood is carved out, which is not a good chain.

(1) Use high-quality large core board to dig out the skeleton according to the size of the arc, paste two layers of three splints on both sides, and be sure to brush evenly when coating milky white glue to ensure that the three splints are bonded tightly and there is no gap.

2) Make a model with a large core board according to the radian, use high-quality twelve splints to see a 20mm wide strip, nail it to the measured size of the three splints with a spacing of 30mm, and then fix it on the model, and then nail another layer of three splints.