The camera is flooded, can you find after sales?

Don't say that your camera is in the water, you just go to fix it, generally don't need money. I have. Find the authorized repair first, and then contact and send it over. Generally, if you are in a small city, you will have to send it to a repair center in a big city for repair. Don't go to the black stall to fix it.

There is no warranty service for man-made damage.

Finding a repair station will clean you up. **Of course, it also depends on the situation. If there is damage to the electrical components, it will be objective.

Looking for after-sales service If it is indeed water ingress, it will charge you money Of course, if you are confused, it may also give you free maintenance, hehe, you can find it with confidence.

Water ingress is your problem, you can still find after-sales, but it's not free, don't make trouble, people will think you're unreasonable, but it's not good for your camera.

If during the warranty period, the failure is indeed caused by quality reasons, the maintenance unit is free of charge, if the fault caused by man, the maintenance unit will charge the maintenance fee. In the case of water ingress like yours, you should take out the battery immediately, and then take it to the after-sales service, and the professionals will clean it up after disassembly. As long as you don't change it, it shouldn't cost money.

After you wait for drying, the after-sales service can not be found, and then find the after-sales service, otherwise it is your own man-made damage, and it will be difficult to do.

Find the after-sales service department, it should help you get it.

If you are using a Huawei phone, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance. You can check the address of a nearby Huawei Customer Service Center on the Huawei website.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

First of all, do not turn on or off, take out the camera's battery and SD card, and use a hair dryer to blow hot air into the camera to let the water evaporate.

No matter what kind of camera you are, if you fall into the water, the first thing you need to do is not to check whether it can still be turned on and used, and the wiring inside the boot will be short-circuited after entering the water, which means that it will be scrapped directly.

1. The worst result is that the entire machine is scrapped.

Regardless of whether the camera is turned on or not, the main part of the camera can burn out, usually with a 90% chance because there is residual power in the camera or flash, and it will break when water enters it.

2. The metal part of the shutter group of the camera is prone to rust.

3. The motherboard of the camera is also susceptible to corrosion.

5. After the lens gets into the water, it is easy to get moldy. If it is not cleaned up in time, it may also produce water mist in the lens, which will affect the normal shooting.

Shut down immediately. Put it in a cool and ventilated place, dry it slowly, and do not expose it to the sun. If it can't be turned on or there are other faults after drying, you can only find the after-sales maintenance department for inspection and maintenance.

Hello, after the camera enters the water, it must be in a natural environment at this time, or use some hair dryer to dry it, which will be more appropriate, don't turn on the machine immediately, it is easy to burn the motherboard circuit when you turn it on, and then you can see if it can be used and put it in the rice cylinder to absorb moisture.

If there is water, put it in a cool place, turn it off, wait for three or four days, turn it on again, and if there is a problem, go to the repair shop.

Summary. Kiss the camera water treatment method:

Kiss the camera water treatment method:

1. The best way is to take out the battery immediately to power off the camera and prevent the motherboard and circuit from burning out. Don't leave the camera to chance, in case the camera is damaged even more.

2. Pour out the water to prevent the water from remaining in the camera and lens to corrode the equipment.

3. Send it to the professional camera maintenance department as soon as possible and clean it with professional cleaning materials in time.

Kiss Note 1: Do not disassemble and assemble by yourself.

2: The emergency method of using a hair dryer to dry is not advisable and cannot solve the practical problem at all. Just because the camera surface is dry doesn't mean that the water-damaged area won't corrode.

Hope it helps<>

1. Cut off the power of the camera and do not try to turn it on.

2. Wipe off visible water stains on the body (or blow properly with a hair dryer) and find a case that can hold the camera.

3. Lay a layer of rice in the box and place the camera bayonet facing down.

4. Pour in rice grains to cover the fuselage, about one inch higher than the height of the fuselage.

5. Close the lid and leave it for a week to start the machine.

Of course, this practice has a certain chance to make your SLR rebound, and it can also save you a lot of maintenance costs.

Dear Glad your question Do not move or shake your phone frequently after entering the water so that moisture does not spread inside the phone. 2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is ingested, so as not to blow liquid into the phone to prevent damage to the phone.

3.Mobile phones are composed of precision electronic components, and there is a potential hardware danger after water ingress. If there is an inconvenience, please repair it in time.

I hope mine can help you <>

Summary. Hello, look at the water ingress into the camera, and it may not be repaired if it is serious.

If the camera is flooded, if the battery is removed in time if the camera is not turned on and the battery is not powered.

Then after the moisture is dry, there is basically no big problem.

However, it is still possible to leave dirt on the CMOS and CCD.

If there is water and the power is turned on, then if the camera motherboard is burned, it can only be sent for repair.

Can a camera that has been flooded still be repaired to its original state?

Hello, look at the water ingress into the camera, and it may not be repaired if it is serious. If the camera gets into the water, if the camera is not turned on and the battery is not passed, take out the battery in time. Then after the moisture is dry, there is basically no big problem.

However, it is still possible to leave dirt on the CMOS and CCD. If there is water ingress, and the power is turned on, then if the lead is burned, the camera motherboard can only be sent for repair.

There was no power, it was turned off, and the battery was taken out immediately.

Then there won't be any major problems after that.

There is quite a lot of water ingress. I'll see when I'm done tomorrow, dear. Good. Uh-huh.