Added memory, why does it take two times for the computer to turn on normally

Updated on healthy 2024-06-10
14 answers
  1. Anonymous users2024-02-11

    According to your description, it may be a failure caused by the inconsistency of the two memory models, and a very important principle for adding memory is that 2 should be exactly the same as the memory, regardless of brand, capacity or speed.

    Then you check whether your motherboard supports 667 memory, maybe it is a compatibility issue with the motherboard's root memory.

  2. Anonymous users2024-02-10

    The English meaning of that paragraph is that the frequency of the memory and the CPU are not uniform. It needs to be modified in the BIOS.

    It should be caused by the inconsistency of the frequencies of your two memories.

  3. Anonymous users2024-02-09

    1. Close some startup programs, start-run-msconfig---start, in addition to anti-virus software, input methods can be turned off in general.

    2. Disable redundant service components. Right-click "My Computer" --"Management" --Services > Applications "--Services", and set the unwanted services to disabled or manual in the right pane.

    3. Close Dr. Watson, click "Start" -- "Run" -- enter the "drwtsn32" command to open the Dr. Watson window, only keep the "Dump All Thread Context" option, and cancel the checkmark in front of the option.

    4. Delete unused programs and software.

    5. Antivirus, 360 Security Guard or Super Rabbit Repair IE, use 360 Security Guard to clean up bad review software and fix vulnerabilities.

    6. Clean up and defragment disks.

    1) In the window of my computer, right-click the drive letter to be cleaned - "Properties" - "Clean Disk" - check the files you want to delete - OK - Yes.

    2) Clear the temporary file, start-run-enter %temp%-OK.

    3) Clean the registry and junk files with Optimizer or Super Bunny.

  4. Anonymous users2024-02-08

    There's no thorough way.,I can't let you uninstall all the software.2G memory with win7 is like this.。

    It's better to go to the repair station and spend money to add 2G or 4G memory!

    $150 to $250.

    No, most laptops have 2 RAM slots, and you can expand 1 more RAM!

    You can go to the pit stop and have a look!

  5. Anonymous users2024-02-07

    If you are wi7 32-bit system can be installed up to 3 points of multi-G memory, and wi7 minimum configuration is 2G memory, it is best to install wi7 64-bit system memory can support more than 128G, plus root 2G memory computer is much faster, it is more than 100 yuan.

  6. Anonymous users2024-02-06

    2G memory running win7 is really difficult,This is normal,Some notebooks can't add memory but can be changed! There are many specifications of memory.,Add a memory.。。。 4G memory can be very smooth...

  7. Anonymous users2024-02-05

    The first thing to see if you have too many startup items... And then your computer is a brand, and there are no errors like memory. The last thing is to test your disk for damage, bad sectors... Next Master Lu.

  8. Anonymous users2024-02-04

    Cancel the system update, there has been such a problem recently, it is caused by automatic update, and you can restart the computer after canceling.

  9. Anonymous users2024-02-03

    1、Win7 with 2G memory is too low,Add a 4G one。

    2. If you don't want to add memory, reinstalling the system can alleviate it.

  10. Anonymous users2024-02-02

    Refresh and clear it.

  11. Anonymous users2024-02-01

    According to your description, the reason why it is good to re-plug and unplug the memory is generally because of the following situation:

    1. Appear on the old PC:

    2. The gold finger of the memory is rusty and the contact is poor.

    3. There are foreign objects in the memory slot, which need to be removed.

  12. Anonymous users2024-01-31

    There's too much dust in the motherboard slot, or there's a problem with the memory module.

  13. Anonymous users2024-01-30

    Is it a computer? If so, wipe the gold finger of the memory with an eraser, and then blow the memory module jack on the motherboard.

  14. Anonymous users2024-01-29

    It may be caused by insufficient power supply of a single memory module, and the power supply voltage may sometimes be unstable when the single root is normal and the power supply voltage is unstable when the memory module is double.

    Motherboards with two memory slots are sometimes designed to supply both the motherboard and the power supply. The power supply circuit is retained on the motherboard, and the power supply circuit is changed to power supply. Such a design scheme puts forward higher requirements for the power supply, and the memory power supply will be insufficient when paired with a slightly worse quality power supply.

Related questions
8 answers2024-06-10

Other people's rankings are also increasing, but they are increasing faster than you.

13 answers2024-06-10

Adding memory can improve the speed of your computer, depending on the actual situation. This is to speed up your computer, not your internet speed. Internet speed is based on two factors: the speed of the computer plus the speed of the Internet. >>>More

24 answers2024-06-10

Your memory is only 512, and it's normal to have half of it left after entering the XP system. >>>More

21 answers2024-06-10

Reason: Two accounts are set up, and one of them is not hidden. >>>More

16 answers2024-06-10

Service Host Process is a standard dynamic connection library host processing service. For services running from a dynamic connection library (DLL), it is a common host process name. The files are located under the Windows System32 folder of the system. >>>More