The process of making a game console, how to make a game console

Here's how to make a game console:Prepare a pair of scissors, a carton, and tape, and cut the carton from the middle, so that there are three sides with paper edges, leaving one centimeter on each side, and there is no paper edge on one side, so cut a long strip with a width of one centimeter and the same length as other sides, fold the four sides up, paste them with tape, and cut three strips with a width of one centimeter, and the length is two centimeters shorter than the length of the pasted box.

A game console is a computer system that is primarily used for entertainment and uses a television or other specialized display and a dedicated input device using sources** that are only available to licensed software developers. The biggest difference between it and a personal computer is the closed nature of the source** and the software.

Broadly speaking, the mechanical and electronic devices used by humans to play games can be called game consoles. With the development of electronic technology and information industry, as well as the drive of the film and comic industry, video game consoles have become the actual representatives of game consoles. Due to its more specialized gameplay performance, even with such a developed level of computers, PC games still cannot replace the strong position of game consoles.

Cut the motherboard material, punch holes, solder the capacitor chip, then make the shell, pack the finished product, and a game console is complete.

Make motherboard materials, make chips, connect chips and motherboard materials into the shape of game consoles, add buttons to solder, and finally pack them and send them to stores for sale.

On the top floor, it's more vivid, it's actually similar to making a computer host.

Take making a gravity ball game machine with a cardboard box as an example, and the method is as follows:

Tools required: paper boxes, scissors, tape, marbles.

1. Prepare a pair of scissors, a carton, and tape.

2. The carton is cut out from the middle, so that three sides are edged with paper.

3. Leave one centimeter on each side, cut it off with one side, there is no paper edge, cut a long strip with a width of one centimeter and the same length as other sides.

4. Fold the four sides up and attach them with tape.

5. Cut three strips one centimeter wide and two centimeters shorter than the length of the pasted box.

6. Stick three long strips on it vertically, one to the right, one to the left, and one to the right.

7. Put a bead in one end and shake it left and right to let the pillar run to the other end. The carton game machine is ready.

Hello, let me share with you my tutorial on how to make a game console.

Prepare a large piece of white paper for easy cutting.

The pattern is arbitrary, you can also refer to mine, it is better to make it bigger, otherwise the button is too small.

Which piece of paper to wrap the button in.

Fold a spring and attach it to the back of the button.

Paste the button of the game console (the small core blind button here is too small to stick), and wrap the edge with paper.

Finally, the cut paper is assembled.

Color the pieces of paper.

Demonstrate the results (this is what a successful assembly looks like).

Last time the computer did it again, I did this.,This is a little too small.,Everyone can adjust the size according to the actual situation.,It's not original.,There are a lot of **tutorials on the Internet.,You can search**Tutorial**Tutorial is clearer.。

To learn to be a gamer, you must first learn to learn computer-related categories.

Then develop and break into the inside of the game console.

You also need to have talent.

Without Shouchang's talent, it can only be a quick imitation.

The specific practice of the game console is as follows:Tools: Raw materials: cardboard, bamboo skewers, ice cream sticks, colored paper, transparent film, hot melt glue gun.

1. Use cardboard to make 5 coin slots separated by pairs, and the width of the spacing between each other is the same as the width of the coin slot.

2. Separate them with blue hard paper.

3. Use the same method to make another set of coin slots, Lu Su to ensure that the positions of the two sets of coin slots are misaligned with each other, and then use different colors of paper to distinguish them.

4. Make a coin guide panel out of short bamboo skewers and cardboard.

5. Tie the bamboo sticks.

6. Then cover with a layer of transparent plastic film.

7. Use cardboard to make the base frame next to it, which is used to place the coin slot and guide panel.

8. The guide panel is done.

9. Stack the two sets of coin slots on the base, and then place the coin guide panel above the coin slots.

10. This is the installation.

11. Finally, drop the coin from the small hole above the guide panel, due to the block of the bamboo stick, the coin will randomly fall into different coin slots, thus enhancing the fun of the game.

When making a game console, use scissors, cartons, and tape to cut three sides of the carton into three pieces, leaving one centimeter on each side, if there is no edge, cut it into a long strip with a width of one centimeter and the same length as the other sides, then fold it up, stick it with adhesive tape, and then cut it into three strips of 1 centimeter wide and 2 centimeters in length.

A game console is a game console designed primarily for recreation, and its source code is intended for use only by authorized software developers, including televisions, other special monitors, and specialized input devices. The biggest difference between it and a PC is that its source code and software are completely closed.

Broadly speaking, all the machines and electronic devices that people use can be called game consoles. With the rise of electronics, information, movies, comics, and other industries, video game consoles have become mainstream. Because its gaming performance is more professional, PC games still can't replace game consoles even in today's computer technology.