What is the best thing to remove formaldehyde, and what is the best thing to use to remove formaldeh

1. Plants can play a certain role in removing formaldehyde, but generally can only be used when the formaldehyde content is low;

2. The room must open the window in time to allow the air circulation in the room, which can reduce the content of harmful substances in the room;

3. You can buy some substances that specifically remove formaldehyde, such as activated carbon, formaldehyde remover, etc., which need to be placed in the corners of the room and replaced in time, generally once every half a month, so that there is a better adsorption effect;

Ventilation removal method.

No matter what the season, it's a good habit to keep windows open for ventilation at all times. Especially for newly renovated houses, ventilation can effectively reduce the concentration of harmful gases in the room. It is best to open the door or drawer of the furniture, which is more conducive to the release of harmful gases.

Plant Absorption:

Open all the drawers and cabinet doors in the furniture for ventilation, and at the same time, you can also place some green plants such as cactus, spider plant, reed, ivy, iron tree, chrysanthemum and other green plants according to the function and area of the room. These plants have an extremely strong ability to absorb formaldehyde. It is recommended to place two pots of plants with meters high in a room of about 10 square meters.

Activated carbon adsorption method.

Activated charcoal is internationally recognized as an expert in drug abuse, without any chemical additives, and has no effect on human health. It is recommended to put two to three dishes in each room, and the odor in the room can be basically eliminated after three days. This method is suitable for areas with low to medium pollution, and is more effective when used in combination with other chemical methods.

Nano photocatalytic technology.

Nanotechnology catalytic technology is effective, and qualified users can ask professional formaldehyde personnel to use nano photocatalytic technology, which can completely eliminate formaldehyde.

Air purifier.

Air purifiers have super purification capabilities and are loved by many consumers. However, air purification gas is easy to saturate in the same principle as activated carbon. After using it for a long time, the purification effect will become worse, and the air purifier is expensive and consumes electricity.

Consumers can choose according to their actual situation.

Fresh air system. It is to use the function of ventilation to continuously discharge the indoor formaldehyde dirty gas outdoor, and at the same time send the outdoor fresh air purified by the machine to the room to ensure the freshness and cleanliness of the indoor air.

The principle of prevention and control of formaldehyde is nothing more than chemical decomposition (photocatalyst, chitin, biological enzymes) and physical blocking (a film-forming glue).

There are indeed some environmental protection companies in the market, the service quality is not very good, but it does not mean that all companies are like this, it is recommended that the contract stipulates that the payment will be made after a specific period of time, such as 1 month after the third-party re-inspection. This will be much better, and it can also be agreed that the second year will be re-inspected, and if there is a problem, the environmental protection company will be responsible for dealing with it, etc.

The technology used by environmental protection companies is different, photocatalyst, chitin, biological enzymes, no matter what the means, as long as you solve the problem, in fact, you can. Even if you use a sealant to brush on the furniture to prevent the release of gas, this method, although we don't use it, is also feasible, with reference to many big brands of custom furniture, such as Sophia, Oppai, their furniture is very well sealed, so that the gas released inside is very little, in fact, it is also a kind of closure.

In addition to formaldehyde, there are many methods, I have been doing this industry for almost 10 years, in addition to formaldehyde, I really don't think it is difficult, the owner's formaldehyde exceeds the standard by 2-3 times, I can also easily deal with it to qualify, but also to ensure that the later stage is not **. Indoor pollution, not only formaldehyde, but also benzene, TVOC, etc., especially on behalf of the odor of TVOC, is the industry to deal with the problem, even if sometimes the formaldehyde data is very low, can not guarantee that the odor is not a little bit, at present through our mature technical way, you can reduce the odor of the newly renovated house by 50-80%, if the owner cooperates, some families reduce the odor by 90%, it can also be done.

Shanghai formaldehyde removal products are spraying construction! ~

When you are very attentive to solve problems, use mature products and rigorous processes to deal with decoration pollution to qualify, it is already very easy.

If you want to ask me if I have failed, there are indeed customers who are not satisfied, there is a saying that medicine cures immortal diseases. When you encounter a very strange decoration, you will also feel too difficult, the interior is all made of soft packaging by the decoration company, all the soft packaging is the worst MDF, this kind of plate can not be used for home decoration at all, the whole house is a soft package, you can't deal with the plate inside, you spray more purification products outside the soft package, it will not help. This kind of decoration, the design is brain-dead, the owner is miserable, and the soft package can only be dismantled and thrown away.

I can proudly say that our own formaldehyde and odor removal construction, satisfaction is still very high, 90% of our customers are introduced by old customers.

Finally, let's talk about the formaldehyde release cycle, generally only in the first 1-2 years, which is the peak period of formaldehyde release, in the first year, if you deal with the data is very low, it will be released later, but the indoor formaldehyde data is still very low. It's only going to get lower and lower. Because purification products also have a certain durability, there is no problem in guaranteeing them for 3-5 years.

We normally sign a contract with customers for 10 years, so let's put it this way, there is no problem in the first few years, how can there be problems in the later stage?

The best way to remove formaldehyde is to open the window for ventilation, it is recommended to be more than 3 months...

Aoin photocatalyst and formaldehyde scavenger. Formaldehyde scavengers can quickly remove formaldehyde, but they cannot remove 100% of formaldehyde, because the volatilization of formaldehyde is long-term. Aoin photocatalyst can remove formaldehyde for a long time, which can just solve the long-term volatilization problem of formaldehyde.

Activated carbon bar, if there is a peculiar smell in the decoration of the house, put more activated carbon can effectively absorb it.

Activated carbon has the highest adsorption function and can be purchased from many places.

The second is green plants, such as pothos.

Activated carbon. Activated carbon itself has the characteristics of many capillary pores, these small pores can absorb formaldehyde molecules in the air well, and activated carbon adsorption formaldehyde will not cause secondary pollution to the indoor environment, but activated carbon adsorption formaldehyde will be saturated, and formaldehyde will no longer be adsorbed after saturation. Therefore, it must be replaced in time.

The adsorb-saturated activated carbon can be used to absorb formaldehyde again after exposure to the sun. Of course, if the economy allows, it is of course better to replace it with new activated carbon in time.

There is a photocatalyst formaldehyde remover sold on the Internet, I have tried it, and it is very easy to use.

If the human body is exposed to formaldehyde for a long time, it will cause chronic respiratory diseases, and there will be a risk of cancer.

1. The most common way to remove formaldehyde indoors is to open windows for ventilation, and this method has almost no cost. But the ventilation method also has disadvantages, first of all, the location of the house should be good to achieve the effect of ventilation, and secondly, the formaldehyde in the decoration materials is in a state of continuous release, and it is impossible to completely remove formaldehyde through window ventilation, it can only play an auxiliary role in removing formaldehyde.

2. Putting some green plants at home can also effectively remove odors, especially pothos, spider plants, aloe vera, monstera, cactus, ivy, etc., which can effectively absorb harmful gases. In addition, large plants such as the Ping An tree and the camphor tree, which are more popular on the market, can release a fresh gas on their own, which makes people feel happy, and is also more suitable for removing the smell of new furniture.

3. Activated carbon to remove formaldehyde is the most commonly used way to remove formaldehyde in life, and the cost is low, but activated carbon is prone to adsorption saturation in a short period of time, and it needs to be replaced or dried after saturation. Another point to note is that if the amount of activated carbon is not enough, it will not play much role in removing formaldehyde indoors.

5. We all know that formaldehyde is volatile at high temperature, and we can use some heating equipment to increase the temperature at home a lot, so that a large amount of formaldehyde gas can be volatilized, and then formaldehyde can be removed by opening windows for ventilation. Repeated operation a few times, you can remove most of the formaldehyde in the home, but we must pay attention to safety when using heating equipment to avoid fire

6. We all know that the easiest way to remove formaldehyde is to ventilate, and the family with poor room ventilation can accelerate the air flow inside and outside the room through the fan, accelerate the discharge of formaldehyde-containing air, which can effectively reduce the concentration of indoor pollutants, but it can only treat the symptoms but not the root cause, and this method may not be practical in the season when you need to keep warm.

At present, it has really been confirmed that there are two things that can have an effect on formaldehyde.

One is activated carbon, which can adsorb formaldehyde, but it should be noted that activated carbon will be saturated, if it is placed in the room for half a month, it should be placed on the balcony for ventilation for half a month, otherwise the activated carbon is full, and the formaldehyde will be released into the room.

There is another thing is photocatalyst, photocatalyst is really useful in removing formaldehyde, and it also has the following advantages:1Green and environmentally friendly, there will be no secondary pollution in the process of removing aldehydes2

Safe and harmless, it can be used in a wide range of fields3Powerful and comprehensive4The effect of removing formaldehyde from various odors and photocatalysts is powerful, and it is right to choose it for aldehyde removal.

Hope it helps.

The best products are qualified "photocatalyst products", but there are too few qualified products that can reach the nanometer level. It is recommended to do a little bit to keep it ventilated for a long time.

Faster air circulation.

In the closed state for a long time, try to prevent some products that can adsorb formaldehyde. Molecular sieves.

Finally there is a condition of time.

Furniture surfaces can be wiped with clean water.

Accelerate the dissolution of harmful substances such as formaldehyde.

If it really exceeds the standard, it is better to ask a professional organization, and don't take it as a trivial matter.

There are many ways to remove formaldehyde, but it should be used in combination to maximize the effect, we can use the following methods to avoid the formaldehyde that may be present in the air:

1.Green plants are the most economical way to remove formaldehyde, raise a few pots of azaleas at home, can adsorb harmful objects such as formaldehyde and sulfur dioxide in the room, but the types of rhododendrons are different, you must raise splendid azaleas, Western rhododendrons are very good.

2.Balcoidite Formaldehyde Removal: By adsorbing free formaldehyde in the air, the content of indoor harmful gases is reduced, so that the indoor formaldehyde reaches the normal content, and the algalite can be continuously absorbed and decomposed.

3.High-temperature fumigation: High-temperature fumigation is to use higher temperatures to promote the decomposition of formaldehyde. However, formaldehyde can only be removed temporarily, and formaldehyde cannot be completely removed, but the effect is also very good.

4.Diallin removal of formaldehyde: it is directly sprayed on the pollution source to decompose and remove, which can speed up the release of formaldehyde inside, and at the same time can decompose formaldehyde and other decoration pollution, and there is a significant difference with other chemical sprays, which does not require light and ultraviolet rays.

1. Wipe with salt water, basically dig the ambush at intervals, and wipe it on the weekend, on the one hand, it is dust, and on the other hand, it is to disperse the smell.

2. Ventilation and fan, originally to be used to move in, in the summer deliberately made a double door, one is the developer's original door, the other is with a grid, convenient for ventilation in summer, you can turn on the air conditioning less and cool. So when I bought the fan, I basically blew it against the furniture and the cloakroom, and the ventilation there was not very good.

3. Ye Guangni, these are put in the drawer and used some, which is very good, and can adsorb and decompose harmful substances for a long time.

4. Photophyllin, this is a kind of spray, mainly for me to spray on the wardrobe, bedside tables, cabinets and other furniture. Because a friend who is engaged in chemistry told me that the focus of formaldehyde release is furniture, so he suggested that I use this focus to remove formaldehyde, and I didn't use it much in other places.

5. Air purifier, bought a spare, worried about the problem of the bedroom at night, and the result was that I bought it and opened it for 2 days and did not use it again, one is too loud, I can't sleep at night, and the other is that the air quality is very good, and I feel useless and have been putting it, and now it has become a furnishing.

The furniture part I used the rabbit E0 grade board, the other furniture is newly bought, the whole process is like this, it took about 8 months to stay. No matter how fast the method is, I don't know, it is estimated that you can find a formaldehyde removal company to ask, but my friend said, no matter how fast it is, don't live in 2 months, on the one hand, there will be a high release period in the early stage, on the other hand, benzene and TVOC can be volatile in the first 2 months, I personally think it makes sense, so ventilation for 2 months is still necessary.

Fresh air system. It is to use the function of ventilation to continuously discharge the indoor formaldehyde dirty gas out of the outdoors, and at the same time send the fresh air into the outdoor car through the machine to ensure the freshness and cleanliness of the indoor air.

There are many ways to remove aldehyde, only one effect is too slow, do not think that formaldehyde is something we can't see and touch, it doesn't exist, in fact, it is very stubborn, some inferior decoration materials formaldehyde release life can be as long as more than ten years, before moving into a new home, aldehyde removal is urgent, but can not be blindly chosen, the following is for you to introduce some aldehyde removal tips, for your reference.

1. Wise Stone.

It can actively adsorb indoor free formaldehyde, the process will not be affected by any external factors such as temperature, humidity, light, etc., the adsorption rate of formaldehyde imitation is also dozens of times that of ordinary adsorption materials, in addition to the unique decomposition function, the adsorbed formaldehyde can be decomposed into harmless carbon dioxide and water, and then discharged, so that its internal pores have been in an unsaturated state, and the aldehyde removal rate can reach more than 90%. When choosing, it is important to note that it is a gray ore with an irregular shape and is not a round particle.

2. Open windows for ventilation.

When the window is opened, there will be a steady stream of fresh air to dilute the indoor air containing formaldehyde to achieve the purpose of purifying formaldehyde, but the window is easily affected by the weather, and the effect is also affected by the house type

3. Plants.

Choose plants that can adsorb formaldehyde, pothos, aloe vera, spider plant and other plants can adsorb a certain amount of formaldehyde pollution, and can indeed remove formaldehyde. Placing some greenery in your new home can also help to beautify the room and freshen the air. However, the adsorption capacity of plants is relatively limited, and if the formaldehyde concentration is too high, the plants will wilt and die.

4. Formaldehyde remover.

Formaldehyde scavenger is the use of chemical or biological principles, formaldehyde decomposition into harmless carbon dioxide and water or other harmless substances, so as to achieve the purpose of purifying formaldehyde, but there are many manufacturers, the quality is also uneven, you must keep your eyes open when buying, otherwise it is easy to cause the introduction of other harmful substances.

Fifth, the fresh air system.

The fresh air system can ensure that the home is in a ventilated state 24 hours a day, which can greatly increase the exchange of indoor air and the outside world, although the effect is very good, but the first time of this fresh air system is more expensive, and it is a better choice to install it before decoration.

Summary: Formaldehyde is very harmful, and the selection of furniture and decoration materials should be strictly controlled when decorating new houses to reduce formaldehyde from the source.