How to make a villain with paper, how to cut a video with a single villain who burns paper

1. Paint 8 paper tubes yellow, 2 paper tubes vermilion, 4 paper tubes green, and 16 paper tubes black and let dry.

2. Stick the paper tube with glue. First, make 4 black paper tubes, 2 glued side by side, which are the hands and ears of the villain, and 2 of the 3 glued side by side, as the feet of the villain.

3. Align the 4 green paper tubes and glue them into long strips as the villain's hair, and align the 2 red paper tubes to stick to the villain's mouth.

4. For the yellow paper tube, take 2 and 4 of them and align them into strips.

5. White paper tubes, 2 and 6 aligned sticks 2 strips, 3 aligned sticky 4 strips, 4 aligned sticky 3 strips, and the white paper tube will be combined into the body part of the villain.

6. Let's combine the villain's face and put the green hair; yellow face; red lips; Black eyes, so the combination sticks up.

7. Based on the face, perfect the villain's head. Glue a white paper tube on the edge of the villain's face, and then glue 6 strips of paper tube on top and bottom. Glue 3 strips of paper tubes of 4 lengths in the middle part.

Glue 2 lengths of white paper tubes to the top. Two black paper tubes side by side as ears.

8. Sticky to the body of the villain. This combination is glued into the body of a villain. After gluing, lift it up to see if it is firm.

9. Glue the cardboard with glue and stick it to the villain's face.

Note: Cardboard is used to easily hang the villain on the wall.

There are many ways to fold one with paper, or draw it on paper with a pen, and then cut it out with a knife after the picture is drawn, or there is also a way to fold it with a few pieces of paper and put it together into a human shape. There are a lot of crafts to make of all kinds, and the key is to see what kind of task you are going to do. The materials used, the production method is different, anyway, it is paper, just do it, you can add some other auxiliary materials, and make it look better.

You look it up on the Internet, there are a lot of manual things that can be done, you can fold them, you can paste them. You can also draw a small figure, and after you finish painting, you can paint it yourself.

A piece of paper, a pen, a pair of scissors.

Fold the prepared paper upwards.

Then turn the folded paper opening to the right. Take out a pen and draw the shape of a cute and simple little person.

Then draw the eyes and mouth of the cute villain, take out the scissors and cut out the cut villain Morihail, and finally tidy up the cut villain.

The simple villain is cut and finished.

First, choose a square of confetti that you like, then fold it in half to draw a half circle with your face and arms as half of your face.

Draw the arms of the villain's body with vertical lines.

Draw half of the stroke, and then symmetrically follow the outline, that is, follow the outline, and then follow the outline. That's it.

The rules are as follows:

Fold the paper in half and cut a small person at a time, fold it in half twice and cut two, fold it three times and cut four, and fold n to the n-1 power of 2, which is the product of n-1 and 2 times.

According to the actual calculation, the size of the original paper of the new board is 840mm 1188mm (one big open), that is, the size of 16 sheets of A4 paper, if the paper thickness is 1mm, the size of its fold 1 time should be 840mm, which is the loss of the folding edge).

The actual size of the two folds is, the size of the three folds is, that is to say, the actual size of each fold must be subtracted from the thickness loss of the fold, (of course, if it is not folded in half, but cut, this loss will not be counted) The size of the paper after four folds should be. Judgment Wheel Wisdom.

Theoretically, when the paper is folded to the sixteenth time, the size of the digging answer (excluding the loss of the folding edge) should be. However, if you calculate the fold loss, you can only fold it to the twelfth time.

Chinese paper-cutting is a kind of folk art that uses scissors or carving knives to cut patterns on paper, which is used to decorate life or cooperate with other folk activities. In China, paper-cutting has a broad mass base, blends into the social life of people of all ethnic groups, and is an important part of various folk activities.

Its inherited visual image and modeling format contain rich cultural and historical information, express the social cognition, moral concepts, practical experience, life ideals and aesthetic tastes of the general public, and have many social values such as cognition, education, ideology, lyricism, entertainment, and communication.

The paper-cutting person needs to fold the paper-cut first, then draw the character image to be cut on the paper, cut out the drawn figure with scissors and carving knives, and then open the paper-cut figure to complete. The tools and materials that the paper-cutting villain needs to prepare are cardboard, pencils, scissors and knives.

Prepare a rectangular piece of cardboard, which does not need to be too thick, otherwise it will be more laborious when cutting. Fold the short side of the rectangular paper in half three times. Turn one side of the opening to the right, start drawing from the left, and draw half a small person.

The direction of the opening of the paper is the direction of the outside of the villain's body, start to draw the villain's body on the side that does not open, pay attention to the part of the hand connected to the villain on the right can not be drawn, and draw all the way to the edge of the paper on the right. If it does not extend to the edge of the paper, then the figure will be cut out and scattered, rather than joined together.

After drawing the general outline of the villain, draw the eyes, nose and mouth of the villain, and cut them out when cutting paper. Once the drawing is done, use scissors and a knife to cut out all the excess. After the cut is done, you can open the villain, and fold it three times to make a total of four cute villains.

Prepare materials: paper cuts, scissors, pencils.

1. First take a square piece of paper-cutting, and then fold it in half to form a triangle of lifting rocks, as shown in the jujube line diagram.

<>5. After drawing, cut out the villain with scissors.

6. Done. <>